ergolastec® ESD Floor mats - interlocking system - ergolastec®-ESD floor mats type B - J as interlocking system The mats types B - J can be combined arbitrarily. • With the interlocking system the mats can be combined easily and flexibly in horizontal and vertical direction • easy laying without fixing on the ground • Mat size corresponds to the workstation dimensions used in the production areas according to DIN 33406 In compliance with the ESD standard DIN EN 61340-5-1 dpvlink 17109 Type Article 1350.130.B Workstation mat ESD-dry ergolastec type B 3 sides beveled edges / 1 long side interlocking system; W x L: 948 x1350 mm 1350.131.C Workstation mat ESD-dry ergolastec type C 2 short sides beveled edges / 2 long sides interlocking system; W x L: 887 x 1350 mm 1350.140.D Workstation mat ESD-dry ergolastec type D 3 sides beveled edges / 1 short side interlocking system; W x L: 1000 x 1303 mm 1350.141.E Workstation mat ESD-dry ergolastec type E 2 long sides beveled edges / 2 short sides interlocking system; W x L: 1000 x 1242 mm 1350.150.F Workstation mat ESD-dry ergolastec type F 1 long side + 1 short side beveled edges 1 long side + 1 short side interlocking system; W x L: 948 x 1303 mm 1350.151.G Workstation mat ESD-dry ergolastec type G 1 long side + 1 short side beveled edges 1 long side + 1 short side interlocking system; W x L: 948 x 1303 mm 1350.152.H Workstation mat ESD-dry ergolastec type H 1 short side beveled edges 2 long sides + 1 short side interlocking system; W x L: 887 x 1303 mm 1350.153.I Workstation mat ESD-dry ergolastec type I 1 long side beveled edges 1 long side + 2 short sides interlocking system; W x L: 948 x 1242 mm 1350.154.J Workstation mat ESD-dry ergolastec type J 4 sides interlocking system; W x L: 887 x 1242 mm ergolastec®-ESD Floor mats Vario+ ergolastec®-ESD floor mats made of NBR (nitrile rubber) are suitable for the special requirements of electronics and microelectronics workstations • Reduced risk of stumbling by beveled outer edges • Elastic cushioning to relieve muscles and joints • Comfortable standing • Thermal and footfall-sound insulation • Slip-resistant • Protection against falling objects • Very high stability and lying capacity, so it is best suited when transport equipment is applied • Mat can easily be cleaned by means of conventional cleaning methods and agents • Higher lying resistance due to higher dead weight of the mat • Durable - optimal for the use in multiple-shift operation In compliance with ESD standard DIN EN 61340-5-1 dpvlink 25917 Type Article 1351.300.A Workstation mat ESD-dry ergolastec Vario+ W x L: 1000 x 1350 mm, thickness 16 mm all-round beveled edges Systems against electrostatics ESD Protection © Compumet AG 2023 | www.compumet.ch 157
RkJQdWJsaXNoZXIy MjU0MA==