Compumet Main catalog 2023/2024

Transparent ESD plastic materials PC-120 ESD Polycarbonate plates PC120 ESD polycarbonate plates have a surface coating on both sides providing a permanent electrostatic dissipation. The surface resistance RS =10 5 - 108 ohm fulfills the requirements of DIN EN 61340-5-1 for surfaces in ESD protected of EPAs (Electrostatic dischargeProtectedArea). Charges can be reliably dissipated. The existing surface resistance does not lead to a sudden discharge and sparking. The dissipative surface causes less dirt and dust. This makes thePC120 ESD polycarbonate platessuitable for all applications in the electronics manufacturing as well as for covers of displays. The PC120 ESD polycarbonate plates are particularly suited for low-dust rooms or cleanrooms. ThePC120 ESD polycarbonate platesare heat moldable and mechanically workable. They are suitable especially for transparent protective devices due to their high impact resistance. Applications: • Protective devices • Machine covers • Covering of conveyor belts • Housing • Fixture construction • Test equipment • transparent trays, etc. Test method Unit Reference value Physical properties ISO 1183 g/cm 3 1.2 • Density ISO 62 % 0.15 • Water absorption(water storage) DIN 4102 Fire class B1 • Fire behavior Test method Unit Reference value Optical properties ISO 489 nD 20 1.585 • Refractive index Test method Unit Reference value Electrical properties IEC 60093 Ohm cm 1016 • Specific contact resistance IEC 60243 kV/mm 35 • Dielectric strength IEC 60093 DIN EN 61340-5-1 Ohm 105 - 108 • Surface resistance Test method Unit Reference value Mechanical properties ISO 527 MPa 60 • Tensile strength ISO 179/1fU no break • Impact strength(Charpy without notch) ISO 527 % 6 (110) • Ultimate elongation ISO 527 % 60 (70) • Tensile stress at yield ISO 527 MPa 2300 • Modulus of elasticity ISO 9352 %Haze > 10 • Abrasion(500 g, CS10F, 500U) µm < 1 • Film thickness ISO 2409 Gt0 • Adhesion coating/substrate Test method Unit Reference value Thermal properties B50 °C 148 • Vicat softening temperature DIN 52612 W/m °C 0.2 • Thermal conductivity °C 120 • Continuous operation temperature °C 135 • Maximum temperature for a short time DIN 53752 K 1 65 10-6 • Linear coefficient of thermal expansion dpvlink 11217 Plate PU Thickness [mm] L [mm] W [mm] Article PC-120 ESD Polycarbonate plates 5231.PC-120ESD.2 2.4 m² 9 piece 2 2000 1200 5231.PC-120ESD.3 2.4 m² 6 piece 3 2000 1200 5231.PC-120ESD.4 2.4 m² 5 piece 4 2000 1200 5231.PC-120ESD.5 2.4 m² 4 piece 5 2000 1200 5231.PC-120ESD.6 2.4 m² 3 piece 6 2000 1200 5231.PC-120ESD.8 2.4 m² 2 piece 8 2000 1200 5231.PC-120ESD.10 2.4 m² 1 piece 10 2000 1200 5231.PC-120ESD.12 2.4 m² 1 piece 12 2000 1200 Packaging in case of acceptance of incomplete packaging units: 25.00 Euro ++ Plates are delivered with an excess of approx. 20 mm ++ DPF SK100 Self-adhesive polyester film SK DPF-100 is a transparent polyester film with a dissipative surface coating. It is suited to a later adhesion of smooth, insulating surfaces. Properties: • Film thickness 0.1 mm • Self-adhesive • Abrasion-resistant • Transparent In compliance with ESD standard DIN EN 61340-5-1 dpvlink 457 Abmessung Article 5235.DPF.SK100 DPF SK 100 polyester film Width: 1220 mm x 100 m Film thickness: 0.1 mm 5235.DPF.SK100.Z DPF SK 100 polyester film - cutting dpvlink 10251 Abmessung Article 5235.DPF.SK100.A4 DPF-SK100 polyester film A4 DIN A4, PU = 100 pieces DPF 100 Polyester film DPF 100 is a transparent, polyester film with a dissipative surface coating. Properties: • Film thickness 0.1 mm • Abrasion-resistant • Dissipative polyester film • Transparent • copyable In compliance with ESD standard DIN EN 61340-5-1 dpvlink 459 Abmessung Article 5235.DPF.100 DPF 100 polyester film Width 1220 mm x 100 m Film thickness 0.1 mm Roll width 1220 mm x roll length....mm = ....m² (roll length max. 100 m) 5235.DPF100.Z DPF 100 polyester film - cutting Roll width ...mm x lenght ...mm Film thickness 0.1 mm (Roll length up to 100 m) dpvlink 8575 Abmessung Article 5235.DPF.100.A4 DPF 100 polyester film A4 DIN A4, PU = 100 pieces Systems against electrostatics ESD Protection © Compumet AG 2023 | www.compumet.ch 170

RkJQdWJsaXNoZXIy MjU0MA==