ESD protection

Effective ESD protection is crucial to prevent damage to sensitive electronic components caused by electrostatic discharge. It comprises customizable solutions that are tailored to the specific requirements of the respective working environment.
Key components include personal grounding systems, ESD floor coverings and workstation sets that ensure a safe working environment that complies with standards. In addition, ionizing devices, marking systems and special cleaning agents support reliable protection in production. These measures protect both the products and the employees and ensure compliance with the relevant ESD standards.

Image
Preview: The image shows a tall, slender post in bright yellow with a round black base. At the top, it has an opening, which might be intended for a barrier tape.
Preview: Image
Preview: The image shows a black shelf with a back panel. It has a rectangular base and an opening in the board. The construction is sturdy and practical for wall mounting.
Preview: Image
Pedestal stand for PGT 120 with support
Pedestal stand
Floor mat with yellow bevelled edge
Holder for PGT 120, attachable
Accessory kit for PGT 120

4 Products
Product No.: 7100.PGT120.TERM.SET
from 81.15 CHF
excl. 8.1% tax
to the product family
The image shows a yellow testing device with two large metal plates in the center. It has buttons and symbols, including
PGT®120.COM with RS232 interface
PGT 120 personnel grounding tester for
access control, ++special version++
incl. power supply unit and footwear electrode
Footwear electrode
++ Special version with an RS232 interface to connect e.g. to time recording terminals, test results are provided via RS232 interface ++

Product No.: 7100.PGT120.COM
1,002.95 CHF
excl. 8.1% tax
Show product
The image shows a yellow plug with a triangular shape. There are three connection sockets on the front. Below there is a note for use for ESD control.
Preview: The image shows a yellow plug with a triangular shape. There are three connection sockets on the front. Below there is a note for use for ESD control.
Preview: The image shows a yellow plug with a triangular shape. At the top is a screw, below are two round contacts with orange centers. Labeling for grounding and ESD control.
Preview: The image displays a yellow, triangular plug with a central connection and two lateral sockets. Labels provide information about grounding and ESD control.
Grounding plug yellow with 3 ports
ESD-protective
Grounding plug yellow 3 x snap 10 mm
ESD / Color: yellow / Connection: 3 x snap 10 mm
Grounding plug yellow 2 x snap 10 mm / 1 x 5 mm screw plug
ESD / Color: yellow / Connection: 2 x snap 10 mm + 1 x 5 mm screw connector / with knurled nut
Grounding plug yellow 1 x snap 10 mm / 2 x banana socket 4 mm
ESD / Color: yellow / Connection: 1 x snap 10 mm + 2 x BA socket 4 mm

3 Products
Product No.: 2201.230.E
from 13.65 CHF
excl. 8.1% tax
to the product family
The image displays a blue ESD protection mat with a yellow warning sign. A cable with a grounding clip and a clamp is connected. Color variants of the mat are also visible.
Table sets design Europe
ESD-protective
Table set complete design 1 - 600 x 900 mm
ESD / Length : 900 mm / Width : 600 mm / Thickness : 2 mm
Table set complete design 2 - 600 x 1200 mm
ESD / Length : 1200 mm / Width : 600 mm / Thickness : 2 mm

2 Products
Product No.: 1401.615
Price on request
to the product family
The image shows a yellow warning sign with a black triangle. Inside, there is a hand depicted holding a pen. Below it reads:
Label Handling instructions English
Count: 1000 piece
ESD warning label, self-adhesive paper
36 x 75 mm (roll = 1000 pcs)

Product No.: 2850.3675.e
17.95 CHF
excl. 8.1% tax
Show product
The image shows a roll of removable adhesive tape with a green, matte paper. On the roll, symbols for fire and mountains are depicted, which are present in the print.
Dissipative PVC adhesive tape 50 mm x 66 m
ESD / Width [mm]: 50x6 / Core diameter: 76 mm / Roll length [m]: 66 / Color: green
ESD adhesive tape / PVC, 50 mm x 66 m
dissipative surface, green, ESD warning symbol
(DIN EN 61340-5-1)

Product No.: 2820.5066.IDP
8.30 CHF
excl. 8.1% tax
Show product
The image shows a black, round vacuum cleaner labeled
EPA vacuum cleaner EPA-VAC
ESD
EPA Vacuum cleaner EPA-VAC , 220-240 VAC / 900W
incl. 10 m connection line, 2.5 m suction hose,
1.0 m suction tube, 3 different attachments,
filter
electrically dissipative (DIN EN 61340-5-1)

Product No.: 7350.VAC.EPA
767.15 CHF
excl. 8.1% tax
Show product
The image displays a piece of light gray flooring with small, dark spots. One corner is slightly bent, revealing the texture of the material.
Ecostat PR - 2.0 PVC rolls
ESD-protective
Ecostat PR 2.0 PVC rolls 20 m
ESD / Color: grey / Width : 2000 mm / Roll length: 20 m / Thickness : 2.0 mm
Ecostat PR - 2.0 PVC - flooring rolls
ESD / Color: grey / Width : 2000 mm / Roll length: 9 m / Thickness : 2.0 mm
Ecostat PR - 2.0 PVC - flooring cutting
ESD / Color: grey / Width : Cutting mm / Thickness : 2.0 mm

3 Products
Product No.: 1250.7004.R
from 64.20 CHF
excl. 8.1% tax
  to the product family
The image shows a yellow control device with a screen. On the screen, there is a hand symbol and a suit depicted. Next to it is an icon for an open lock.
Preview: The image shows a computer screen displaying a webpage with various devices. Next to the screen is an icon of an open padlock in yellow, symbolizing unlocking.
Preview: The image shows a yellow control device with a screen. On the screen, there is a hand symbol and a suit depicted. Next to it is an icon for an open lock.
Preview: The image displays a large green puzzle piece icon positioned on various devices such as a monitor, a tablet, and a smartphone against a bright background.
EPApro® Control Server
EPApro® Control Server license
EPApro® Personnel Tester device license
EPApro® Control Server - module training
EPApro® Control Server module individual measurement configuration
EPApro® Control Server Microsoft SQL connector

5 Products
Product No.: EPApro.1000.LI-2
Price on request
to the product family
The image shows a rectangular, black trash can without a lid. It has grippy side walls and a yellow warning marking on the front. The edges are slightly rounded.
Preview: In the image, there is a black trash can with a lid. It has wheels on the bottom, making it easily movable. There is a warning symbol on the front.
Preview: The image shows a rectangular, black trash can without a lid. It has grippy side walls and a yellow warning marking on the front. The edges are slightly rounded.
Preview: The image shows a flat, rectangular black lid with two side handles. On the top is a yellow symbol indicating how to handle it.
Preview: The image shows a black, square rolling cart with four movable wheels. The cart has a flat, rectangular shape and is made of one piece of plastic. There is a symbol on one side.
Preview: In the picture, there are two gray plastic brackets and an elongated holder visible. The holders have a curved shape with an opening to secure objects.
Multi-purpose container
ESD-protective
Multi-purpose container
ESD / Length : 510 mm / Width : 490 mm / Height : 725 mm / Volume: 90 l / Material: polypropylene
Multi-purpose container 90 liters
ESD / Length : 510 mm / Width : 490 mm / Height : 600 mm / Volume: 90 l / Material: polypropylene
Loose lid
ESD / Length : 510 mm / Width : 460 mm / Height : 50 mm / Material: polypropylene
Trolley
ESD / Length : 370 mm / Width : 370 mm / Height : 140 mm / Material: polypropylene
Hinge (not conductive)

5 Products
Product No.: 5180.890
from 14.15 CHF
excl. 8.1% tax
to the product family
The image shows a long, black cable with two round, metallic connectors at the ends. The cable is curved and has a green clip at one point holding it together.
Preview: The image shows a long black cable with a round end that has a connector, and a metal clip. The clip is suitable for clamping and is located at the other end of the cable.
Preview: The image shows a black cable with a round connector on one end and a flat eyelet on the other end. The cable has a curved shape and is quite long.
Preview: The image shows a long, black cable with two round, metallic connectors at the ends. The cable is curved and has a green clip at one point holding it together.
Preview: The image displays a thin, black cable with a clip on one end and a round connector on the other. The clip is silver-colored and metallic, while the connector has a closed shape.
Preview: The image shows a black cable with a round end and a plug on one side. On the other side, there is a clamp and a ring connector for attachment.
Preview: The image shows a black cable with a round end that has a small, flat, round surface. The other side has a plug. The cable is coiled and has a green marking.
Preview: The image shows an electrical component with two round discs: one with a yellow dot and one without. They are connected by a long, black cable.
Grounding wires / connecting cables
ESD-protective
Grounding wire ESD 1.5 m, snap 10 mm / banana plug
ESD / Color: black / Connection: snap 10 mm / BA / Cable length: 1.5 m
Grounding wire ESD 1.5 m, snap 10 mm / eyelet M5
ESD / Color: black / Connection: snap 10 mm / eye M5 / Cable length: 1.5 m
Grounding wire ESD 1.5 m, snap 10 mm / snap 10 mm
ESD / Color: black / Connection: snap 10 mm / 10 mm / Cable length: 1.5 m
Grounding wire ESD 3 m, snap 10 mm / banana plug
ESD / Color: black / Connection: snap 10 mm / BA / Cable length: 3.0 m
Grounding wire ESD 3 m, snap 10 mm / eyelet M5
ESD / Color: black / Connection: snap 10 mm / eye M5 / Cable length: 3.0 m
Grounding wire ESD 3 m, snap 10 mm / snap 10 mm
ESD / Color: black / Connection: snap 10 mm / 10 mm / Cable length: 3.0 m
Grounding wire ESD 3 m, snap 10 mm + banana socket / banana plug
ESD / Color: black / Connection: snap 10 mm / stackable + BA socket/BA / Cable length: 3.0 m
Grounding wire ESD 4.6 m, snap 10 mm / eyelet M5
ESD / Color: black / Connection: snap 10 mm sloped / screw eye M5 / Cable length: 4.6 m
Grounding wire for table covering ESD 1.8 m, snap 10 mm / eyelet M5
ESD / Color: black / Connection: snap 10 mm sloped / screw eye M4 / Cable length: 1.8 m
Grounding wire for floor covering ESD 4.5 m, snap 10 mm / eyelet M4
ESD / Color: black / Connection: snap 10 mm sloped / screw eye M4 / Cable length: 4.5 m

10 Products
Product No.: 2250.756.10
from 6.35 CHF
excl. 8.1% tax
to the product family
The image shows several rolls of tape. A large, orange roll with a transparent backing stands upright, while a strip with orange dots and a narrow, transparent tape lie next to it.
Polyimide adhesive dots
Kapton adhesive dots 4 mm
Ø: 4.0 mm / Count: 1,000 piece
Kapton adhesive dots 5 mm
Ø: 5.0 mm / Count: 1,000 piece
Kapton adhesive dots 6 mm
Ø: 6.0 mm / Count: 1,000 piece
Kapton adhesive dots 8 mm
Ø: 8.0 mm / Count: 1,000 piece
Kapton adhesive dots 9 mm
Ø: 9.0 mm / Count: 1,000 piece
Kapton adhesive dots 10 mm
Ø: 10.0 mm / Count: 1,000 piece
Kapton adhesive dots 12 mm
Ø: 12.0 mm / Count: 1,000 piece
Kapton adhesive dots 14 mm
Ø: 14.0 mm / Count: 1,000 piece
Kapton adhesive dots 15 mm
Ø: 15.0 mm / Count: 1,000 piece
Kapton adhesive dots 16 mm
Ø: 16.0 mm / Count: 1,000 piece

10 Products
Product No.: C-729115.D12
from 12.95 CHF
excl. 8.1% tax
to the product family
Image
Grounding box with 3 ports
ESD-protective
Grounding box 3 x 10 mm snap, grounding wire 3 m with screw eye M4
ESD / Color: yellow / Connection: 3 x snap 10 mm / Version: EU / Connector: screw eye M4
Grounding box 3 x 10 mm snap, grounding wire 3 m with Schuko plug
ESD / Color: yellow / Connection: 3 x snap 10 mm / Version: EU / Connector: connector plug
Grounding box 3 x 10 mm snap, grounding wire 3 m with Schuko plug (Switzerland)
ESD / Color: yellow / Connection: 3 x snap 10 mm / Version: Switzerland / Connector: connector plug

3 Products
Product No.: 2200.6503
from 14.50 CHF
excl. 8.1% tax
to the product family
The image shows two rolls of yellow tape. The tape has
Paper adhesive tape
ESD-protective
Paper adhesive tape 38 mm x 66 m
ESD / Width : 38 mm / Core diameter: 76 mm / Roll length [m]: 66 m
Paper adhesive tape 50 mm x 66 m
ESD / Width : 50 mm / Core diameter: 76 mm / Roll length [m]: 66 m

2 Products
Product No.: 2800.T.5066.de
from 8.30 CHF
excl. 8.1% tax
to the product family
The image displays a digital scale with a vertical, yellow stand. A display is mounted at the top. The weighing area is rectangular, featuring two flat, gray surfaces.
Preview: The image shows a rectangular, black device with a blue front. On the blue surface are two small green buttons and a red light. A USB cable leads away from the device.
Preview: The image shows a black USB cable with a rectangular connector on one end. The other end has a flat USB plug. The cable is heavily coiled and has a textured surface on the connector part.
Preview: The image shows five thin, rectangular cards lying next to each other. In the bottom left, there is an RFID (radio waves) symbol depicted, showing wavy lines.
Preview: The image shows a long, yellow, trapezoidal plastic block. Next to it are three small, silver screws. The block could be part of an assembly system.
Preview: Image
Preview: The image shows a yellow calibration device with a black casing. In the center, there is a large dial with various numerical markings (1M to 200M) and two arrows at the top for calibration and measurement.
Preview: The image displays a small USB-WLAN adapter. It is primarily silver with a black base. On the front, there are two narrow openings and the model name TP-LINK.
Preview: The image shows a rectangular mat with a yellow border. In the center, there are two rectangular black areas that have a textured surface.
Preview: The image displays a digital scale with a vertical, yellow stand. A display is mounted at the top. The weighing area is rectangular, featuring two flat, gray surfaces.
EPApro® Personnel Tester 1000 accessories
PC-RFID Reader, USB for EPApro®
External temperature/humidity sensor for EPApro®
ID card High Frequency for EPApro®
ID card Low Frequency for EPApro®
Divider for footwear electrode EPApro®
Footwear electrode for EPApro®
EPApro® calibration unit 1000
EPApro® WLAN Adapter
Test mat for EPApro®
Pedestal set for EPApro®

10 Products
Product No.: EPApro.1001.ZSF.SET
from 55.40 CHF
excl. 8.1% tax
to the product family
The waste bin is tall and rectangular, with a black surface. It has a blue rim at the top and a yellow warning sign indicating its use in ESD-protected areas.
Preview: The image shows a black trash can with a yellow warning. It reads “Use in ESD Protected Areas” and features a symbol indicating safe handling.
Preview: This is a black trash can with a rectangular, sturdy design. On the front, there is a yellow sign with the inscription
Preview: The waste bin is tall and rectangular, with a black surface. It has a blue rim at the top and a yellow warning sign indicating its use in ESD-protected areas.
Waste container ESD
ESD-protective
Waste container 25 liters
ESD / Height : 400 mm / Width : 250 mm / Length : 250 mm / Volume: 25 l / Weight: 1.5 kg / Load capacity : 60 kg / Dimensions LxW [mm]: 250 x 250
Waste container 50 liters
ESD / Height : 600 mm / Width : 300 mm / Length : 300 mm / Volume: 50 l / Weight: 1.85 kg / Load capacity : 70 kg / Dimensions LxW [mm]: 300 x 300
Waste container 120 liters
ESD / Height : 780 mm / Width : 400 mm / Length : 400 mm / Volume: 120 l / Weight: 3.0 kg / Load capacity : 80 kg / Dimensions LxW [mm]: 400 x 400

3 Products
Product No.: 5181.851
from 81.00 CHF
excl. 8.1% tax
to the product family
65 to 80 (from a total of 338)