EPA access control system

EPA access control systems in electrostatically protected areas (EPA) ensure that only people with standard-compliant earthing are granted access to sensitive production areas. They check compliance with the required leakage resistances before access is granted, thereby protecting sensitive electronic assemblies from electrostatic discharge.

The product range includes mechanical components such as Gotschlich turnstiles and swing doors as well as electronic systems such as the EPApro® ESD personnel grounding control system, EPA barrier systems and PGT personnel test stations. These modular systems can be flexibly integrated into existing access control systems and contribute to process safety and the standard-compliant implementation of ESD protection

Our Brands

EPApro Gotschlich
The image shows a control device with a screen displaying information. Below it is a hand pointing to the screen. A red bracelet is on the wrist.
Preview: The image shows a yellow-black touchscreen device with an RFID symbol and a palm pressing a button. There are two graphic representations of clothing and shoes.
Preview: The image shows a control device with a screen displaying information. Below it is a hand pointing to the screen. A red bracelet is on the wrist.
Preview: The image shows a device with a touchscreen that is used for detecting RFID chips. A hand with a red bracelet is close to the screen, which displays various icons.
TOP
TOP
EPApro® Personnel Tester 1000
ESD-protective
EPApro® Personnel Tester 1000 table-top device
ESD / Width : 180 mm / Height : 100 mm / Length : 265 mm / Version: table-top unit / Voltage: 100 - 230 V / Test voltage: 30 - 100 V
EPApro® Personnel Tester 1000 wall-mounted device
ESD / Width : 180 mm / Height : 100 mm / Length : 265 mm / Version: wall-mounted device / Voltage: 100 - 230 V / Test voltage: 30 - 100 V
EPApro® Personnel Tester 1000 wall-mounted device with RFID reader type HID Prox
ESD / Width : 180 mm / Height : 100 mm / Length : 265 mm / Version: wall-mounted device, with RFID reader type HID Prox / Voltage: 100 - 230 V / Test voltage: 30 - 100 V

3 Products
Product No.: EPApro.1000.2W
Price on request
to the product family
The image shows a white tester with a yellow top. There are various symbols and buttons on the surface. Two metal plates are designed to be pressed to conduct a test.
Personnel grounding tester PGT 120
ESD / Width : 150 mm / Height : 65 mm / Length : 200 mm / Voltage: 230 V
PGT 120 personal grounding tester for
access control, including power supply unit and
footwear electrode

Product No.: 7100.PGT120
739.60 CHF
excl. 8.1% tax
Show product
The image displays an access system featuring a tripod turnstile. At the top, there is a control panel with buttons and displays. The entire device is made of metal and has a clear, functional shape.
Preview: The image displays an access system featuring a tripod turnstile. At the top, there is a control panel with buttons and displays. The entire device is made of metal and has a clear, functional shape.
Preview: The image shows a metal turnstile. It has a rectangular base and a horizontal arm that rotates to allow access. The surface is smooth and shiny.
Preview: The image shows a turnstile access point. It has three metal arms that can be rotated to control passage. The structure is made of shiny stainless steel.
Barrier system COMPACT
Turnstile Compact 3 arms with integrated PGT 120
Locking arm/element: 3 arms, straight rail / Version: individual system, With integrated PGT 120 / passage width: 570 mm / Operation mode: unidirectional operation / bidirectional operation / Voltage: 230 V
Turnstile Compact 2 arms
Locking arm/element: 2 arms, straight rail / Version: individual system / passage width: 570 mm / Operation mode: unidirectional operation / bidirectional operation / Voltage: 230 V
Turnstile Compact 3 arms
Locking arm/element: 3 arms, straight rail / Version: individual system / passage width: 570 mm / Operation mode: unidirectional operation / unidirectional operation / Voltage: 230 V

3 Products
Product No.: 6COM.3.AEW
Price on request
to the product family
The image shows a striking, vertical post in bright yellow. At the top, there is a black-flecked barrier tape that can be extended horizontally.
Preview: The image shows a red-orange post with a horizontal barrier. The barrier has red and white stripes. The post is mounted on a round black base.
Preview: The image shows a striking, vertical post in bright yellow. At the top, there is a black-flecked barrier tape that can be extended horizontally.
Belt barrier post 4-way cartridges
Belt barrier post red 4-way cartridges
Color: red / white / Plate diameter: 345 mm / Post height: 975 mm
Belt barrier post yellow 4-way cartridges
Color: black / yellow / Plate diameter: 345 mm / Post height: 975 mm

2 Products
Product No.: 1802.9586.gelb
217.95 CHF
excl. 8.1% tax
to the product family
The image shows a yellow testing device with two large metal plates in the center. It has buttons and symbols, including
PGT®120.COM with RS232 interface
PGT 120 personnel grounding tester for
access control, ++special version++
incl. power supply unit and footwear electrode
Footwear electrode
++ Special version with an RS232 interface to connect e.g. to time recording terminals, test results are provided via RS232 interface ++

Product No.: 7100.PGT120.COM
1,002.95 CHF
excl. 8.1% tax
Show product
The image shows a yellow control device with a screen. On the screen, there is a hand symbol and a suit depicted. Next to it is an icon for an open lock.
Preview: The image shows a computer screen displaying a webpage with various devices. Next to the screen is an icon of an open padlock in yellow, symbolizing unlocking.
Preview: The image shows a yellow control device with a screen. On the screen, there is a hand symbol and a suit depicted. Next to it is an icon for an open lock.
Preview: The image displays a large green puzzle piece icon positioned on various devices such as a monitor, a tablet, and a smartphone against a bright background.
EPApro® Control Server
EPApro® Control Server license
EPApro® Personnel Tester device license
EPApro® Control Server - module training
EPApro® Control Server module individual measurement configuration
EPApro® Control Server Microsoft SQL connector

5 Products
Product No.: EPApro.1000.LI-2
Price on request
to the product family
Image
Preview: Image
Preview: Image
Belt barrier posts
Belt barrier post, yellow
Color: yellow / Post height: 960 mm / Plate diameter: 350 mm
Belt barrier post, black
Color: black / Post height: 960 mm / Plate diameter: 350 mm

2 Products
Product No.: 1801.G.P.Y
158.00 CHF
excl. 8.1% tax
to the product family
Image
Preview: The image shows a tall, slender post in bright yellow with a round black base. At the top, it has an opening, which might be intended for a barrier tape.
Preview: Image
Preview: The image shows a black shelf with a back panel. It has a rectangular base and an opening in the board. The construction is sturdy and practical for wall mounting.
Preview: Image
Pedestal stand for PGT 120 with support
Pedestal stand
Floor mat with yellow bevelled edge
Holder for PGT 120, attachable
Accessory kit for PGT 120

4 Products
Product No.: 7100.PGT120.TERM.SET
from 81.15 CHF
excl. 8.1% tax
to the product family
The image shows a rectangular mat with a yellow border. In the center, there are two rectangular black areas that have a textured surface.
Preview: The image shows a rectangular, black device with a blue front. On the blue surface are two small green buttons and a red light. A USB cable leads away from the device.
Preview: The image shows a black USB cable with a rectangular connector on one end. The other end has a flat USB plug. The cable is heavily coiled and has a textured surface on the connector part.
Preview: The image shows five thin, rectangular cards lying next to each other. In the bottom left, there is an RFID (radio waves) symbol depicted, showing wavy lines.
Preview: The image shows a long, yellow, trapezoidal plastic block. Next to it are three small, silver screws. The block could be part of an assembly system.
Preview: Image
Preview: The image shows a yellow calibration device with a black casing. In the center, there is a large dial with various numerical markings (1M to 200M) and two arrows at the top for calibration and measurement.
Preview: The image displays a small USB-WLAN adapter. It is primarily silver with a black base. On the front, there are two narrow openings and the model name TP-LINK.
Preview: The image shows a rectangular mat with a yellow border. In the center, there are two rectangular black areas that have a textured surface.
Preview: The image displays a digital scale with a vertical, yellow stand. A display is mounted at the top. The weighing area is rectangular, featuring two flat, gray surfaces.
EPApro® Personnel Tester 1000 accessories
PC-RFID Reader, USB for EPApro®
External temperature/humidity sensor for EPApro®
ID card High Frequency for EPApro®
ID card Low Frequency for EPApro®
Divider for footwear electrode EPApro®
Footwear electrode for EPApro®
EPApro® calibration unit 1000
EPApro® WLAN Adapter
Test mat for EPApro®
Pedestal set for EPApro®

10 Products
Product No.: EPApro.1001.ZPM
from 55.40 CHF
excl. 8.1% tax
to the product family
The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image displays a rectangular frame with a black, textured inner field and a yellow border. The frame features a central, open field.
Preview: The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image shows a long, rectangular red block with a slanted edge. Next to it are several green screws. The block could be used for construction or sports.
Accessories for PGT 120
Mat
Wall bracket for PGT 100 / PGT 120
Divider for footwear electrode

3 Products
Product No.: 7100.PGT120.WK
from 55.30 CHF
excl. 8.1% tax
to the product family
The image displays a black, rectangular device with a yellow front. It features a rotary knob in the center and several status indicators in the form of symbols and text, displaying calibration values.
Preview: The image displays a calibrated device with a black casing. On the front, there is a yellow label featuring various scale markings and a rotary knob in the center.
Preview: The image displays a black, rectangular device with a yellow front. It features a rotary knob in the center and several status indicators in the form of symbols and text, displaying calibration values.
Calibration unit for PGT 120
Calibration unit for PGT 120 with 8 Dip switches
Calibration unit for PGT 120 with 12 dip switches

2 Products
Product No.: 7100.PGT120.CU.12
from 119.30 CHF
excl. 8.1% tax
to the product family
The image shows a standing counter with an orange sign
Preview: The image shows a standing counter with an orange sign
Preview: The image shows a device with a screen, telephone, and keypad. Below is an area with two red lines. It is encased in a sturdy, yellow frame.
Preview: The image displays a rectangular frame with a yellow border and a dark interior. In the center, there are two small cutouts that resemble the shape of a cup or a container.
PGTest Station for PGT® 120.COM
PGTest Station for PGT® 120 / PGT® 120.COM
PGTest station for PGT® 120.COM
Test station mat for PG test station

3 Products
Product No.: 7100.PGT120.TEST.V01
from 306.20 CHF
excl. 8.1% tax
to the product family
The image shows a compact, cylindrical object with a black frame and a bright yellow interior. On the side, there is a small, black bracket.
Preview: The image shows a compact, cylindrical container made of black plastic. It has a transparent inner window and a side mount. The lid is flat and smooth.
Preview: The image shows a compact, cylindrical object with a black frame and a bright yellow interior. On the side, there is a small, black bracket.
Retractable belt cartridge
Belt cartridge, empty
Belt cartridge 2.3 m German/English
Belt cartridge 2.3 m English
Belt cartridge 3.6m German/English
Belt cartridge 3.6 m English

5 Products
Product No.: 1801.G.K.36.DE
from 30.55 CHF
excl. 8.1% tax
to the product family
The image shows a yellow sign with black text. It reads
Sign holder DIN A4
Sign holder DIN A4, metal frame
with mounting flange
suitable for belt barrier posts
1801.G.P.Y and 1801.G.P.B

Product No.: 1801.G.P.SA4
100.45 CHF
excl. 8.1% tax
Show product
The image shows a long, narrow, black object that resembles a door handle or a hardware part. It has a smooth surface with two visible screws.
Preview: The image displays a yellow barrier tape marked
Preview: The image shows a long, narrow, black object that resembles a door handle or a hardware part. It has a smooth surface with two visible screws.
Wallmount system with retractable belt cartridge
Wallmount system with belt cartridge; 2.3 m German/English
Wallmount system with retractable belt cartridge 2.3 m English
Wallmount system with retractable belt cartridge 3.6 m German/English
Wallmount system with retractable belt cartridge 3.6 m English
Wall clip

5 Products
Product No.: 1801.G.WC
from 10.20 CHF
excl. 8.1% tax
to the product family
A hand holds a yellow-black barrier tape attached to a wall. Next to it is a bracket to secure the tape. The background is gray.
Preview: The image displays red-and-white barrier tapes with a round black casing. The tape is patterned in a zigzag, with red and white stripes, and is used for securing areas.
Preview: The image shows a security barrier with a yellow, horizontal band that is marked with black stripes. The band mechanism is mounted on a wall and can be rolled out.
Preview: A hand holds a yellow-black barrier tape attached to a wall. Next to it is a bracket to secure the tape. The background is gray.
Wallmount belt cartridge
Wallmount belt cartridge
Wallmount belt cartridge
Wallmount belt cartridge
Wallmount belt cartridge
Wallmount belt cartridge
Wallmount belt cartridge
Wall clip black

7 Products
Product No.: 1802.9618
from 10.85 CHF
excl. 8.1% tax
to the product family
1 to 16 (from a total of 28)