Solder fume extraction

Solder fume absorbers are used to filter fumes and particles produced during soft soldering. They reduce the release of potentially harmful substances into the ambient air and support compliance with applicable occupational health and safety guidelines.

By using suitable filter technologies, they contribute to improving the air quality in the workplace. Solder fume absorbers are used in particular in areas with manual soldering workstations to ensure a low-emission production environment.

The image shows a device with a slanted top surface. It has an orange front and a black, textured surface underneath. There are control buttons on the side.
WLA-1 LED solder fume extractor
WLA 1LED - soldering fume absorber
with LED lighting (6.2 W)
2-stage power 30 and 70 m²/h
Table-top unit, H x W x D = 260 x 340 x 170 mm
Front orange, housing light grey, 230V-50 W *
without stand bracket/joint stand *.

Product No.: 200.200
608.75 CHF
excl. 8.1% tax
Show product
Image
LDA 4 solder fume extractor
Air flow/hour: 320 m³ / Power: 16 W / Noise level: 36 dB
LDA 4 - solder fume extractor
Dimensions: 260 x 230 x 55 mm, with 4 quiet fans
Air flow 320 m³/h, running noise 36dB
220/240V, 16 watts
Due to the elongated design and the high air flow rate, ideal for manual soldering stations in electronics manufacturing

Product No.: 201.450
231.10 CHF
excl. 8.1% tax
Show product
The image shows a rectangular, perforated metal element in white, standing on two sturdy feet. It has a uniform perforated structure that creates a translucent look.
LDA 600 pollutant absorber
LDA 600 - solder fume extractor
Dim.: 445 x 260 x 55 mm, with 6 axial fans
Air flow 650 m³/h, running noise 42dB
220/240V, 110 watts

Product No.: 201.600
353.70 CHF
excl. 8.1% tax
Show product
The image shows a metal solder fume absorber. It stands on a stable round base and the mast is adjustable.
Preview: The image shows a metal solder fume absorber. It stands on a stable round base and the mast is adjustable.
Preview: The image shows a metal solder fume absorber. It stands on a stable round base and the mast is adjustable.
LDA 2 Solder fume extractor
LDA 2 solder fume extractor
Air flow/hour: 340 m³ / Power: 18 W / Noise level: 44 dB
LDA 2-R Solder fume extractor
Air flow/hour: 220 m³ / Power: 5 W / Noise level: 34 dB

2 Products
Product No.: 201.350
from 221.40 CHF
excl. 8.1% tax
to the product family
The image shows a metal solder fume absorber. It stands on a stable round base and the mast is adjustable.
Preview: The image shows a metal solder fume absorber. It stands on a stable round base and the mast is adjustable.
Preview: The image shows a metal solder fume absorber. It stands on a stable round base and the mast is adjustable.
Preview: The image shows a metal solder fume absorber. It stands on a stable round base and the mast is adjustable.
LDA 1 Solder fume extractor
LDA 1 -Lötdampfabsorber
Air flow/hour: 170 m³ / Power: 18 W / Noise level: 40 dB
LDA 1 Solder fume extractor
Air flow/hour: 183 m³ / Power: 8 W / Noise level: 40 dB
LDA 1-R Solder fume extractor
Air flow/hour: 140 m³ / Power: 4 W / Noise level: 38 dB

3 Products
Product No.: 201.250
from 98.10 CHF
excl. 8.1% tax
to the product family
The image shows a microphone stand. It has a round, heavy base for stability, a tall, adjustable metal rod with a screw head on top to hold a microphone.
Preview: The image shows a group of six rectangular, black plates. The surface feels rough and textured. They are symmetrically arranged, three on the left and three on the right side.
Preview: The image displays three different square surfaces. At the top is a white one, below that a black granular one, and finally a shiny, light brown surface.
Preview: The image displays a transparent package containing black activated carbon filters. The packaging label reads:
Preview: The image shows two strips of fabric: the upper one is gray with a rough texture, the lower one is light beige and soft. They are stacked on top of each other, their lengths are equal.
Preview: The image shows a piece of sandpaper lying on a light surface. The top is rough and dark gray, while the back is smooth and light.
Preview: The image shows a black, U-shaped bracket with a metal pot on top. The bracket has a flat, stable base and allows for safe parking of the pot.
Preview: The image shows a flexible, gray arm with multiple joints and a mount at the end. It is designed to attach and position devices or cameras.
Preview: The image shows a microphone stand. It has a round, heavy base for stability, a tall, adjustable metal rod with a screw head on top to hold a microphone.
Preview: The image shows a rectangular piece of sandpaper. One side is rough and black, the other side is light and smooth. The texture of the rough side feels gritty.
Preview: The image shows a reading lamp with a large, rectangular shade. The shade is orange and black, attached to a flexible arm that can be mounted on a wall or a table.
Preview: The image shows a device with a slanted top surface. It has an orange front and a black, textured surface underneath. There are control buttons on the side.
Accessories for solder fume extractor
Activated carbon filter for solder fume extractor LDA 1
Replacement filter LDF 1-R for solder fume extractor LDA 1-R
Activated carbon filter for solder fume extractor LDA 2
Replacement filter LDF 2-R for solder fume extractor LDA 1
Activated carbon filter for solder fume absorber LDA 4
Table tripod LDS 6
Tripod with articulated arm LDS 10
Table tripod LDS 1
Replacement filter LDF 600 for solder fume absorber LDA 600
Replacement activated carbon filter for WLA-1 solder fume extractor
Tripod with articulated arm for WLA-1 solder fume extractor
Support stand for WLA- 1 solder fume extractor

12 Products
Product No.: 201.260
from 7.65 CHF
excl. 8.1% tax
to the product family
1 to 6 (from a total of 6)