WIM 47 Ionizer Monitor
dpvlink 23245

WIM 47 is a handy monitoring device to monitor fully automatically the ionization at an ESD workstation or in machines.
The positive and negative discharge time as well as the offset voltage are permanently monitored. In case of alarm there is an acoustic and optical signal.
A switch output will shut off the ionizer in case of failure (e.g. via the Switch Box 7100.WIM47.SB) or give an alarm signal to a superordinate control.

Technical data

Measuring range:	± 250V, 0-60s
Display:	measured values display 2 lines, with backlighting
Power supply:	AC 100–240V 50-60Hz / DC 9V, 160mA / 1,5W
Housing:	aluminum
Protection type:	IP20
Operating conditions:	10°C to 40°C / up to 60% rh
Dimensions:	70 x 70 x 85 mm
Weight:	300 g
Operating modes:	Monitor / Measure
Version:	for indoor use CE compliant

Lieferumfang

1 x Ionizer monitor WIM 47
1 x plug-in power supply with exchange adapter (EU/USA)
1 x grounding cable
1 x quick guide

Mode	Function
Mode	Operation mode Monitor: surveillance mode with alarming Measure: permanent display of the static charge
Err Delay	Delay until fault signal 1 min 5 min
Polarity	Intended use or polarity of the switching output Alarm: switching output for alarm signaling to higher-level control system Ionizer: switching operation of an ionizer (via external switching relay)
Perform. (Performance)	Power adjustment tolerant aggressive
Sound	Accoustic alarm Off On