The image shows a large, white plastic container with a green label. On the label it reads "PC Flex Mask" and "Regular Viscosity". It is an industrial product.
P.C. Flex Mask, 1gal. (3.8l)
(Product No.: C-330.204)
The image shows a large, white plastic container with a green label. On the label it reads "PC Flex Mask" and "Regular Viscosity". It is an industrial product.
Notice / Inquire

P.C. Flex Mask, 1gal. (3.8l)

dpvlink:
12251
Further product information
 
164.70 CHF
per PCE

excl. 8.1% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

P.C. Flex Mask, 1gal. (3.8l)

The P.C. Flex Mask is a high-quality, flexible protective mask for circuit boards, designed to protect sensitive areas during the soldering and repair process from solder, fluxes, and other chemical influences. This solder mask made of natural latex rubber without solvent additives is ideally suited for protecting contacts, switches, terminals, and plated-through holes. It also provides protection for electronic components from contact with flux and cleaning agents. After use, the mask can be easily removed without leaving any residue.
The thixotropic paste has a solid content of about 63% and has a slight ammonia smell. It is non-flammable and characterized by a curing time of about 40 minutes at room temperature and 15 minutes at 60ºC. The mask can withstand temperatures up to 268ºC during the soldering process and has a shelf life of about 6 months if unopened. With a volume of 3.8 liters, the P.C. Flex Mask offers a comprehensive solution for protecting critical components on circuit boards.
Content
Content
3800 ml
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Catalogues

Page: 582
Complete Catalog 2023 - 2024

Product Family

P.C. Flex Mask

P.C. Flex Mask is a solder mask made of latex rubber without solvent additives for protecting contacts, switches, connections, plated-through holes and other exposed areas on printed circuit boards during the soldering process. It can also be used to protect electronic components from contact with flux and cleaning agents. The mask is easy to remove afterwards and leaves no residue.

Technical data:

Active ingredients: natural latex rubber
Solids content: approx. 63%
Odor: slight smell of ammonia
Condition: thisotropic paste
Flash point: not flammable
Curing time at room temperature: approx. 40 min
Curing time at 60ºC: approx. 15 min
Removability: 100 %
Temperature resistance: 268ºC during soldering process
Shelf life (unopened) approx. 6 months


Article image
Article description
ESD
Content
Price
Compare
C-330.202 - P.C. Flex Mask, 8oz (237ml)
C-330.202
P.C. Flex Mask, 8oz (237ml)
237 ml
18.80 CHF
C-330.204 - P.C. Flex Mask, 1gal. (3.8l)
C-330.204
P.C. Flex Mask, 1gal. (3.8l)
3800 ml
164.70 CHF
Show Compare List (0)