ESD protection

The waste bin is tall and rectangular, with a black surface. It has a blue rim at the top and a yellow warning sign indicating its use in ESD-protected areas.
Preview: The image shows a black trash can with a yellow warning. It reads “Use in ESD Protected Areas” and features a symbol indicating safe handling.
Preview: This is a black trash can with a rectangular, sturdy design. On the front, there is a yellow sign with the inscription
Preview: The waste bin is tall and rectangular, with a black surface. It has a blue rim at the top and a yellow warning sign indicating its use in ESD-protected areas.
Waste container ESD
Waste container 25 liters
Height : 400 mm /
Waste container 50 liters
Height : 600 mm /
Waste container 120 liters
Height : 780 mm /

3 Products
Product No.: 5181.851
from 81.00 CHF
excl. 8.1% tax
to the product family
The image shows a white fan with a large, round grille at the front. It has a rotary knob on the side and a small display below, which may indicate the operational status.
Ionizing blower 5802i CXL - mobile tabletop model
Discharge time max.: 1 - 2 s / Ozone generation max.: 0.008 ppm /
Ionizing blower 5810i CXL +SIMCO+
mobile tabletop model, Steady State DC,
automatic ermitter cleaning system,
base for table mounting, coverage 30x150 cm
incl. power supply unit
Serial No.:

Product No.: 7500.CXL
1,034.45 CHF
excl. 8.1% tax
Show product
The image shows a yellow calibration device with a black casing. In the center, there is a large dial with various numerical markings (1M to 200M) and two arrows at the top for calibration and measurement.
Preview: The image shows a rectangular, black device with a blue front. On the blue surface are two small green buttons and a red light. A USB cable leads away from the device.
Preview: The image shows a black USB cable with a rectangular connector on one end. The other end has a flat USB plug. The cable is heavily coiled and has a textured surface on the connector part.
Preview: The image shows five thin, rectangular cards lying next to each other. In the bottom left, there is an RFID (radio waves) symbol depicted, showing wavy lines.
Preview: The image shows a long, yellow, trapezoidal plastic block. Next to it are three small, silver screws. The block could be part of an assembly system.
Preview: The image shows a rectangular, flat object with rounded corners. It has two equally sized, clear indentations or windows in the center, surrounded by a gray border.
Preview: The image shows a yellow calibration device with a black casing. In the center, there is a large dial with various numerical markings (1M to 200M) and two arrows at the top for calibration and measurement.
Preview: The image displays a small USB-WLAN adapter. It is primarily silver with a black base. On the front, there are two narrow openings and the model name TP-LINK.
Preview: The image shows a rectangular mat with a yellow border. In the center, there are two rectangular black areas that have a textured surface.
Preview: The image displays a digital scale with a vertical, yellow stand. A display is mounted at the top. The weighing area is rectangular, featuring two flat, gray surfaces.
EPApro® Personnel Tester 1000 accessories
PC-RFID Reader, USB for EPApro®
External temperature/humidity sensor for EPApro
ID card High Frequency for EPApro®
ID card Low Frequency for EPApro®
Divider for footwear electrode EPApro®
Footwear electrode for EPApro®
EPApro® calibration unit 1000
EPApro® WLAN Adapter
Test mat for EPApro®
Pedestal set for EPApro®

10 Products
Product No.: EPApro.1001.CU
from 55.40 CHF
to the product family
The image shows a yellow rectangular device with three round ports on the front. A black cable with a small ring terminal is attached to it.
Preview: The image shows a yellow, rectangular casing with two sockets and a long, black cable. At one end of the cable, there is a metal eyelet for attachment.
Preview: The image shows a yellow rectangular device with three round ports on the front. A black cable with a small ring terminal is attached to it.
Preview: The image shows a yellow, rectangular device with two round openings on the front. It is attached to a long, black cable that leads to a clamp.
Grounding box with 3 ports
Grounding box 2 x 10 mm snap (A) + 1 x BA safety socket 4 mm, grounding wire 2 m / eye M4
Color: yellow / Connection: 2 x snap 10 mm + 1 x BA safety socket /
Grounding box 3 x snap 10 mm , grounding wire 2 m / eye M4
Color: yellow / Connection: 3 x snap 10 mm /
Grounding box 2 x BA safety socket 4 mm + 1 x 10 mm snap, grounding wire 2 m / eye M4
Color: yellow / Connection: 2 x BA safety socket 4 mm / snap 10 mm /

3 Products
Product No.: 2200.121.10.1.AW
from 14.35 CHF
excl. 8.1% tax
to the product family
The image displays a yellow sign with black symbols. At the top, it reads
Label Grounding point
Count: 30 piece
ESD labeling 20 x 40 mm,
"EBP" earthing contact point
PVC film (PU = 30 pcs)

Product No.: 2850.2040
8.95 CHF
excl. 8.1% tax
Show product
The image shows a black computer mouse with an ergonomic shape. It has two main buttons and a wheel in the center. A USB cable connects it to a computer.
PC mouse ESD
ESD optical mouse, USB port / PS 2 port
dissipative (DIN EN 61340-5-1)

Product No.: 5825.1044
23.20 CHF
excl. 8.1% tax
Show product
In the image, there are two rolls of transparent adhesive labels in a light, beige tone. The rolls are placed next to each other, with a round, white inner area.
Preview: In the image, there are two rolls of transparent adhesive labels in a light, beige tone. The rolls are placed next to each other, with a round, white inner area.
Preview: The image shows a roll of transparent, yellowish tape. The inner part of the roll is white with red printed logos. The surface is smooth and shiny.
NEW
NEW
Adhesive tape antistatic, transparent
Adhesive tape dissipative, transparent 15 mm x 66 m
Width : 15 mm / Roll length [m]: 66 m / Core diameter: 76 mm
Adhesive tape dissipative, transparent 12 mm x 66 m
Width : 12 mm / Roll length [m]: 66 m / Core diameter: 76 mm /
Adhesive tape dissipative, transparent 19 mm x 66 m
Width : 19 mm / Roll length [m]: 66 m / Core diameter: 76 mm /
Adhesive tape dissipative, transparent 25 mm x 66 m
Width : 25 mm / Roll length [m]: 66 m / Core diameter: 76 mm /
Adhesive tape dissipative, transparent 50 mm x 66 m
Width : 50x6 mm / Roll length [m]: 66 m / Core diameter: 76 mm /

5 Products
Product No.: 2825.5512.K
from 5.85 CHF
excl. 8.1% tax
to the product family
The image shows a rectangular, flat, white plate. The surface is smooth and monochrome, without any patterns or textures. The edges are straight and clearly defined.
Table plates HPL-ESD custumer-specific
Hard laminate table plate HPL ESD, light grey
ABS edging, -customer's specifications
-
Dimensions: 000 x 000 x 27 mm,

Product No.: 1920.HPL-ESD.Spez
Price on request
Show product
The image shows an elongated, white bar with two black pads at the ends. In the middle, there is a blue area with controls, presumably for operation.
Aerostat GUARDIAN - Ionizer (overhead model)
Aerostat Guardian - overhead model ++SIMCO++
Ionizer, 230V / 50 Hz
[ISO 7 / cleanroom class 10000]

Serial no.

Product No.: 7500.G
1,786.70 CHF
excl. 8.1% tax
Show product
The image shows two rolls of tape. The tape has a brown exterior and a white interior. The rolls are placed side by side and are cylindrical. They are shiny and smooth.
Kapton polyimide film 3M™ Type 5413
Kapton Polyimid Film 3M Type 5413 12.7 mm
Width : 12.70 mm / Roll length [m]: 33 m / Thickness : 0.07 mm
Kapton Polyimid Film 3M Type 5413 19.05 mm
Width : 19.05 mm / Roll length [m]: 33 m / Thickness : 0.07 mm
Kapton Polyimid Film 3M Type 5413 25.40 mm
Width : 25.40 mm / Roll length [m]: 33 m / Thickness : 0.07 mm
Kapton Polyimid Film 3M Type 5413 50.80 mm
Width : 50.80 mm / Roll length [m]: 33 m / Thickness : 0.07 mm

4 Products
Product No.: 3M-5413.1207
from 57.35 CHF
excl. 8.1% tax
to the product family
The image shows a black rubber mat, rolled up and partially unrolled. In one corner, there is a round area with a striped pattern. The mat appears durable and flexible.
Grooved profile covering +NBR+ rolls
Color: black / Width : 1200 mm / Roll length [m]: 10 m / Thickness : 3 mm /
ESD grooved profile covering, + NBR + black,
suitable for tool cabinets/drawers, racks,
trolleys, rolls of 1.20 x 10 m = 12 m²
Material thickness 3.0 mm (DIN EN 61340-5-1)
* New version:
- NBR - new rubber compound
- improved dissipation values

Product No.: 1451.7500.R.120
51.80 CHF
excl. 8.1% tax
  to the product family
Image
Preview: Image
Preview: The image shows a gray background with the inscription
Preview: The image shows a gray rectangular area with the text
Preview: The image shows a gray area with the white inscription
Preview: The image shows a gray rectangular background with the large white inscription
Preview: The image displays a gray-background rectangle with the white text
Preview: The image shows a gray area with the inscription
Preview: The image displays a gray rectangular area with white text in the center that reads
Preview: The image shows a gray, rectangular background with a continuous, jagged line at the edge. In the center is the text
Preview: The image shows a rectangular gray object with rounded corners. In the center it says
ergolastec® ESD Floor mats with/without interlocking system
Workstation mat ESD-dry ergolastec type A without interlocking system
Length : 1350 mm / Width : 1000 mm / Thickness : 16 mm / Color: black / Material: SBR /
Workstation mat ESD-dry ergolastec end piece type B
Length : 1350 mm / Width : 948 mm / Thickness : 16 mm / Color: black / Material: S /
Workstation mat ESD-dry ergolastec center piece type C
Length : 1350 mm / Width : 887 mm / Thickness : 16 mm / Color: black / Material: SBR /
Workstation mat ESD-dry ergolastec end piece type D
Length : 1303 mm / Width : 1000 mm / Thickness : 16 mm / Color: black / Material: SBR /
Workstation mat ergolastec ESD-dry center piece type E
Length : 1242 mm / Width : 1000 mm / Thickness : 16 mm / Color: black / Material: SBR /
Workstation mat ergolastec ESD-dry end piece type F
Length : 1303 mm / Width : 948 mm / Thickness : 16 mm / Color: black / Material: SBR /
Workstation mat ergolastec ESD-dry end piece type G
Length : 1303 mm / Width : 948 mm / Thickness : 16 mm / Color: black / Material: SBR /
Workstation mat ergolastec ESD-dry end piece type H
Length : 1303 mm / Width : 887 mm / Thickness : 16 mm / Color: black / Material: SBR /
Workstation mat ergolastec ESD-dry end piece type I
Length : 1242 mm / Width : 948 mm / Thickness : 16 mm / Color: black / Material: SBR /
Workstation mat ergolastec ESD-dry center piece type J
Length : 1242 mm / Width : 887 mm / Thickness : 16 mm / Color: black / Material: SBR /

10 Products
Product No.: 1350.100.A
from 265.85 CHF
excl. 8.1% tax
to the product family
The image displays a rectangular frame with a black, textured inner field and a yellow border. The frame features a central, open field.
Preview: The image displays a rectangular frame with a black, textured inner field and a yellow border. The frame features a central, open field.
Preview: The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image shows a long, rectangular red block with a slanted edge. Next to it are several green screws. The block could be used for construction or sports.
Accessories for PGT 120
Mat
Wall bracket for PGT 100 / PGT 120
Divider for footwear electrode

3 Products
Product No.: 7100.PGT120.SM
from 55.30 CHF
excl. 8.1% tax
to the product family
The image shows a blue mat with a gray pillow, a yellow warning sign, and a connecting cable. A microphone is integrated into the cable and connected.
Accessory kit for table coverings
Accessory set 1 for table coverings
Accessory set 1 for table coverings (Switzerland)

2 Products
Product No.: 1401.600.ZB-Set 1
from 30.15 CHF
to the product family
The image shows a black calculator with a large display. The keyboard features numbers and functions in various colors. There is also a power on/off button.
ESD calculator
ESD calculator, black ABS
(DIN EN 61340-5-1)

Product No.: 5825.1041
35.10 CHF
excl. 8.1% tax
Show product
A black wire basket is placed on a surface. Inside are three scissors: two with black handles and one with a yellow handle. The scissors are only partially visible.
ESD Pen holder with perforations
ESD pen holder, dissipative metal
height 105 mm x diameter 85 mm
(DIN EN 61340-5-1)

Product No.: 5825.1053
12.70 CHF
excl. 8.1% tax
Show product
81 to 96 (from a total of 336)