Screwdrivers

These screwdrivers offer the ideal solution for safe manual screwdriving in electronics production. The range includes ESD-suitable screwdrivers with conductive handles for safe use in ESD areas, VDE-insulated screwdrivers for live working and conventional models for general assembly work.

The range is complemented by pin wrenches and the individually adjustable reversible blades. All screwdriving tools impress with their ergonomic design, high durability and first-class quality - for energy-saving work and better health in everyday working life.

ESD-sensitive components must be consistently protected against uncontrolled electrostatic discharges. Even small potential differences can lead to serious damage to electronic components.

To prevent this, an ESD-safe working environment is of central importance. Dissipative tools make an important contribution. These enable a controlled charge exchange, with secure earthing, and reliably prevent ESD damage.

Screw profiles

A screw connection is the most commonly used connection technology. The right screw profile is required to prevent damage to the screw and to enable maximum force transmission. You will find the following profiles in the DPV range:

Slot

As one of the very first screw profiles, a simple slot serves as a receptacle for the tool tip. As the blade tends to slip out of the screw, it is not suitable for machine screwing.

Phillips (cross tip)

The cross recess profile is formed from two slotted profiles crossed at right angles. The profile has good screw properties - the force is applied at four edges and makes it easier to screw in.

Pozidriv

The Pozidriv profile is a further development of the Phillips profile. Two crosses offset by 45 degrees form this profile. However, one of the crosses is narrower and also less deep.

Torx

The Torx profile is a star-shaped profile with six rounded tips. A higher torque can be transmitted with this profile. Slipping of the tool is not possible.

Torx Plus

Torx Plus profile is similar to the star-shaped profile of Torx, but with flattened tips. In comparison, even higher torques can be achieved.

Torx Tamper Resistant

The Torx tamper-resistant profile is a safety profile and differs only by a hole in the tool, which prevents screwing by unauthorized persons

Hexagonal

The hexagonal profile consists of six lateral surfaces that are at an angle of 120 degrees to each other. Several versions of the hexagonal profile are available. Socket wrench - the tool tip is placed around the screw. Hexagon ball head - the ball head enables screwing at a 25 degree angle.

Different handles for screwing - See through now

Dissipative ESD handles - screwdrivers

Suitable for working on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage.

Dissipative ESD handles - precision screwdrivers

Ideal for precision work on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage. The slim handles with a twist cap enable fast and precise work.

Voltage-insulated VDE handles - screwdrivers[

Ideal for live working. The electrically insulated screwdriver handles are ideal for all work on live parts.

Voltage-insulated VDE handles - precision screwdrivers

Suitable for live working. The electrically insulated screwdriver handles are ideal for all work on live parts. Slim handles with a twist cap enable fast and precise work.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions. Slim handles with a twist cap enable fast and precise work.

Our Brands

CK Piergiacomi Wera Wiha
The image shows a silver wrench with a length of about 20 cm. At one end, there is a square head, which bears the brand
SYSTEM 6 adapter blade 1/4"
Screwdriver type: Hexagonal / inner square / Tip: 635
Adapter blade for wrench socket
with 1/4" inner square
Length 150 mm ++ Wiha SYSTEM 6++

Product No.: 7803
17.35 CHF
excl. 8.1% tax
Show product
The image shows a Phillips screwdriver. The handle is gray with a black end cap. The blade is long and narrow, suitable for driving screws.
Phillips screwdriver PH 000 x 60
ESD / Screwdriver type: Crosstip (Philips) / Tip: PH000 / Shank length: 60 mm
ESD Phillips screwdriver PH 000 x 60
(Crosstip blade PH 000)
ESD version dissipative, DIN EN 61340-5-1

Product No.: PG2-0.D
6.80 CHF
excl. 8.1% tax
Show product
The image shows a screwdriver with a long, pointed metal head and an ergonomic handle. The handle is black with yellow accents and features non-slip areas for better grip.
Micro-screwdriver 1555 PZ 0 x 60
ESD / Screwdriver type: Pozidriv / Tip: PZ0 / Shank-Ø: 3.0 mm / Shank length: 60 mm / Handle length: 97 mm
Micro screwdriver 1555-ESD PZ0x60
(Phillips blade Pozidriv PZ 0 x 60)
++ WERA micro - ESD version++

Product No.: WE-1555ESD.PZ0x60
8.50 CHF
excl. 8.1% tax
Show product
The image shows a yellow screwdriver with a slightly curved, narrow tip. The handle has a non-slip coating and bears the logo
Lifter ESD 3.5 x 50
ESD / Screwdriver type: Remover / Tip: 3.5/1 / Shank length: 50 mm
ESD lifter 3.5 x 50 mm, for removing
tight components from printed circuit boards
++Wiha screwdriver PicoFinish ESD++

Product No.: 278P.1001
13.95 CHF
excl. 8.1% tax
Show product
The image displays a black tool roll with red accents. Inside the roll, there are several screwdriver bits, which are slender and vary in length, as well as a yellow screwdriver with a black handle.
SYSTEM 4 Set in roll-up bag
ESD / Screwdriver type: bit holder
SYSTEM 4 ESD reversible blade set, 11-piece., ESD
incl. roll bag

Product No.: 2691ESD.Set
123.55 CHF
excl. 8.1% tax
Show product
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE PH 1 x 80
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 80 mm
VDE screwdriver " Wiha Softfinish electric "
Phillips PH1 x 80 mm

Product No.: 321N.PH1x80
11.55 CHF
excl. 8.1% tax
Show product
The image shows a screwdriver with a narrow, long steel head and an ergonomic handle. The handle is red and black, easy to hold. Ideal for precise screwing.
TORX screwdriver 267P TX 01 x 40
Screwdriver type: Torx / Tip: TX01 / Shank length: 40 mm
Screwdriver ++ Wiha PicoFinish ++
TORX blade TX1 x 40

Product No.: 267P.TX01x40
15.05 CHF
excl. 8.1% tax
Show product
The image shows a long, cylindrical roll with a smooth, silver surface. It has solid ends and is equipped with fine grooves.
SYSTEM 4 hexagon ballpoint - hexagon 3.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW3,0/SW3,0 / Shank-Ø: 4.0 mm
Combined hexagon ballpoint-hexagon reversible
blade SK 30, SK 3.0 mm, length 120 mm
++ Wiha SYSTEM 4++

Product No.: 269.SK30
11.80 CHF
excl. 8.1% tax
Show product
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade T1.T2
Screwdriver type: Torx / Tip: T1/T2 / Shank-Ø: 4.0 mm
Torx reversible blade T01 + T02
Length 120 mm ++ Wiha SYSTEM 4++
++ Wiha SYSTEM 4++

Product No.: 269.T01/02
11.80 CHF
excl. 8.1% tax
Show product
The image shows a long, straight ruler. It has a scale with numbers and small marks on one side that indicate measurements. The ruler is light-colored and made of plastic.
SYSTEM 6 slotted reversible blade 3.5 4.5
Screwdriver type: Slotted / Tip: SL3,5/SL4,5 / Shank-Ø: 6.0 mm
Slotted reversible blade 3.5 + 4.5 mm
3.5 x 0.6 mm / 4.5 x 0.8 mm, length 150 mm
++ Wiha SYSTEM 6 ++

Product No.: 284.35/45
10.10 CHF
excl. 8.1% tax
Show product
The image shows a stainless steel ruler with a measurement scale. It has two sharp ends and a continuous, straight edge. The measurements are marked in millimeters and centimeters.
SYSTEM 6 Phillips reversible blade PH1.PH2
Screwdriver type: Crosstip (Philips) / Crosstip (Philips) / Tip: PH1/PH2 / Shank-Ø: 6.0 mm
Phillips reversible blade PH1 + PH2
Length 150 mm ++ Wiha SYSTEM 6++

Product No.: 284.PH1/2
10.10 CHF
excl. 8.1% tax
Show product
The image shows a large, silver, shiny rolling pin with a grooved handle. It is smooth and has rounded parts at both ends.
SYSTEM 6 hexagon ballpoint - hexagon 5.0
Screwdriver type: Hexagonal / Ballpoint / Tip: SW5,0/SW5,0 / Shank-Ø: 6.0 mm
Combined hexagon ballpoint - hexagon reversible
blade SK 50
SK 5.0 mm, length 150 mm ++ Wiha SYSTEM 6++

Product No.: 284.SK50
10.10 CHF
excl. 8.1% tax
Show product
The image shows a caliper that is long and narrow. It has two ends and a scale with markings used for measurement techniques.
SYSTEM 6 Torx® reversible blade T6.T8
Screwdriver type: Torx / Tip: T6/T8 / Shank-Ø: 6.0 mm
TORX reversible blade T06 + T08
Length 150 mm ++ Wiha SYSTEM 6++

Product No.: 284.T06/08
10.10 CHF
excl. 8.1% tax
Show product
The image displays six screwdrivers in various sizes. They feature yellow handles with red elements and are suitable for different types of screws.
Slotted/Phillips screwdriver set 7-piece 320N
Screwdriver type: Slotted / Crosstip (Philips)
Screwdriver set " Wiha Softfinish electric" VDE
7-piece slotted/Phillips, voltage tester 255-3
320N.75x2.5 ,100x4.0, 125x5.5, 150x6.5 (slotted)
321N.PH 1x80, 2x100 (Phillips)

Product No.: 320N.K7
56.60 CHF
excl. 8.1% tax
Show product
The image shows a red screwdriver with a yellow handle. The handle has the inscription
TORX screwdriver 325 VDE TX 10 x 100 SlimFix
Screwdriver type: Torx / Tip: TX10 / Shank length: 100 mm
VDE screwdriver slimFix TORX
T10 x 100 mm
+++ Wiha SoftFinish electric slimFix +++

Product No.: 3251.T10
16.25 CHF
excl. 8.1% tax
Show product
The image displays six screwdrivers of various sizes. The handles are red with yellow accents and the inscription
TORX® VDE screwdriver set, 6-piece SlimFix
Screwdriver type: Torx
Torx screwdriver set, 6-piece VDE
"Wiha SoftFinish electric slimFix"
325.TX 8 x 60, 325.TX9x60
3251.T10, 3251.T15, 3251.T20, 3251.T25

Product No.: 3251N.K6.01
70.35 CHF
excl. 8.1% tax
Show product
49 to 64 (from a total of 89)