JBC Soldering / desoldering tips

JBC soldering and desoldering tips impress with maximum precision, fast heat-up times and optimum heat transfer. They have been specially developed for professional requirements and enable efficient work on both fine and power-intensive soldering tasks. The wide range offers suitable tips for a wide variety of applications. Thanks to intelligent technology and high-quality materials, JBC tips guarantee a long service life and consistent quality in continuous use.

The image displays a technical drawing of a pen or tip with a conical end. It includes measurements and a side view that depict the shape and dimensions.
Preview: The image displays a technical diagram of an object with a conical end. It includes side views and dimensions in millimeters. The lines are clear and schematic.
Preview: The image displays technical drawings of soldering tips from various perspectives. Dimensions are provided that describe the shape and size of the tips, intended for use with QFP packages.
Preview: The image displays technical drawings of soldering cartridges for PLCC packages. Various views and dimensions are shown, explaining the shape and size of the component.
Preview: The image displays technical drawings of chip components. There is a side view of a component that is inserted into a circuit board, as well as dimensions in millimeters.
Preview: The image displays technical drawings of chip components. Various shapes and sizes are depicted, including a cylindrical or rectangular element and a circuit board with components. Dimensions are provided.
Preview: The image displays a technical drawing of chip components on a circuit board. It includes dimensions and a depiction of a connection, along with detailed views of the components.
Preview: The image shows a technical drawing of components on a circuit board. There are several small components arranged on a green board piece, with dimensions in mm and inches.
Preview: The image shows a technical drawing of a thin, pointed tool with a conical attachment. Dimensions for length and diameter are provided.
Preview: The image shows a technical drawing of a sharp object, possibly a pen or tool. It includes dimensions and a detailed view of the tip.
Preview: The image displays a technical drawing of a sharp, cylindrical object with dimensions. It features a conical head and a narrow, elongated shape.
Preview: The image displays a technical drawing of a pen. The tip is shown at the top in various views. Dimensions and details are provided in millimeters.
Preview: The image displays a sharp, cylindrical object with a narrow end. It has a thicker base and is likely a tool or a tip. Dimensions are shown in millimeters.
Preview: The image shows a technical drawing of a sharp tip with an additional tinned area. It is slender and has a rounded base. Dimensions are also provided.
Preview: The image displays technical drawings of cartridges for plastic rivets. Dimensions and volume are provided, with a focus on the design and structure of the cartridges.
Preview: The image displays technical drawings of cartridges with a chrome-plated surface, designed for plastic rivets. It includes dimensions and a representation of the rivet volume.
Preview: The image displays technical drawings with dimensions for cartridges with a chromatic surface, used in plastic engineering. There is a groove design and a green block.
Preview: The image shows a technical drawing of a sharp object with a diameter of 3.5 mm, a length of 10.5 mm, and a 60-degree angle at the tip.
Preview: The image shows a technical drawing of a tool with an elongated body and a pointed, angled edge. Dimensions are provided, including lengths and diameters in millimeters.
Preview: The image shows a technical drawing of a specialized tool with a pointed tip. It features a thin, nickel-plated area and specifications for diameter and length.
Preview: The image displays technical drawings of a component, likely a connector. There are various views and dimensions, the shape is slim and cylindrical with different ends.
Preview: The image shows a technical drawing of a special iron-coated tip for robots. The tip has a wedge-shaped edge and is shown in two views: side and top.
Preview: The image displays technical drawings of a special pen with various tip shapes. The dimensions are provided in millimeters, highlighted by dimension lines.
Preview: The image displays a technical drawing draft of an object with a conical tip, a diameter of 3 mm, and varying lengths. Dimensions are specified precisely.
Preview: The image displays a technical drawing of a tool with a conical, chrome-plated head, suitable for processing plastics. Dimensions are provided.
Preview: The image displays technical drawings of a fastener sketch with two views (A and B). It includes dimensions and details for soldering pins in a connector.
Preview: The image displays technical drawings of a special soldering cartridge. It includes dimensions in millimeters and inches, as well as the shape of the cartridge with a round end and a wider middle.
Preview: The image displays a technical drawing of a cable soldering tool. It includes various views and dimensions of the tip used for soldering cables.
Preview: The image displays technical drawings of a Teflon-coated pen. It includes views from the side, top, and bottom, with measurements. The pen has a pointed shape.
Preview: The image shows technical drawings of a small tool, likely a needle or a probe. It includes dimensions and views from various perspectives.
Preview: The image shows a technical drawing of an object that looks like a sharp nozzle. It has a cylindrical body with a narrow end and is dimensioned. Various views are depicted.
Preview: The image displays a technical drawing of cassettes with a chrome-plated surface, designed for the use of plastic rivets. Dimensions are visible.
Preview: The image shows a technical drawing of a tool with rounded ends and precise measurements. It is intended for plastic riveting pliers and has a chrome-plated surface.
Preview: The image shows a technical drawing of a tool with a pointed end, a cylindrical handle, and measurements. Various views of the tool are depicted.
Preview: The image shows a technical drawing of a micro tactile switch from Panasonic. It includes different views of the switch and dimensions in millimeters.
Preview: The image displays a technical drawing of a cutting cartridge for rubber and plastic. It includes dimensions and a schematic representation that clarifies the shape and application of the cartridge.
Preview: The image displays a technical drawing of a connector. At the top is the plug with dimensions, followed by a circuit board with components below. Measurements are provided in both mm and inches.
Preview: The image shows a technical drawing of a pen. It has a pointed tip and a cylindrical casing. Dimensions in millimeters are indicated on the longitudinal side.
Preview: The image shows a technical drawing of a tool, consisting of a long, narrow handle and a pointed, conical tip. The dimensions are provided.
Preview: The image displays a technical drawing of a component with dimensions. It consists of a rectangular base with a long, narrow connector that is mounted on a circuit board.
Preview: The image displays technical drawings of an electronic component with a cylindrical connector, a small green package, and precise measurements in millimeters.
Preview: The image displays technical drawings of a DUAL IN LINE connector. Dimensions in mm are provided, showing the sizes of both the connector and the circuit board. The connector has a cylindrical shape and is attached to a circuit board.
Preview: The image shows a technical drawing of a dual in-line component with dimensions. It includes a connector seated on a circuit board and is shown in two views.
Preview: The image displays technical drawings of a cartridge for QFP and PLCC cases. Dimensions are provided in millimeters, as well as the shape of the cartridge and a green chip.
Preview: The image displays a technical drawing of a cartridge system for QFP and PLCC packages, with dimensions and a side view. A wire connects the cartridge to a control surface.
Preview: The image shows a technical drawing of a component with various dimensions. At the top, there is a casing visible, which sits on a green PCB, and below it, there is a tool connected by cables.
Preview: The image displays a technical drawing of a cartridge for QFP and PLCC packages. It shows dimensions and the shape of the device. A detail indicates the connection and the dimensions.
Preview: The image displays a technical drawing of a container for QFP and PLCC packages. It includes dimensions in millimeters and inches, as well as a schematic connection.
Preview: The image displays technical drawings of PLCC sockets. The top shows dimensions and a square component with 44 contact points. An additional cable is also illustrated.
Preview: The image displays technical drawings of PLCC cartridges. At the top are two views of a square connector with 32 contact positions. Below there is a description with dimensions in mm and inches.
Preview: The image displays technical drawings of a connector. At the top, dimensions and a 3D representation of the plug are visible. Below, there is a top view of the circuit board with connection.
Preview: The image displays a technical diagram of a pen with a conical tip. Dimensions are provided: diameter and length measurements in millimeters. The view is shown from both the front and the side.
Preview: The image shows a technical drawing of a precise tool with a long, narrow handle and a targeted, curved tip. Dimensions are indicated.
Preview: The image displays a technical drawing of a device with a curved end and a straight body. The dimensions are provided, including diameter and length.
Preview: The image displays technical drawings of a tool with a pointed end. There are front, side, and detailed views. Dimensions are provided. The shape is ergonomic.
Preview: The image displays technical drawings of a special soldering tip. It has a pointed, narrow shape and is used for quick soldering. Dimensions are provided in millimeters.
Preview: The image displays technical drawings of soldering tips. One tip has a conical shape with a large contact area. The dimensions are provided, including a detailed sectional view and a top view.
Preview: The image displays technical drawings of a component called
Preview: The image displays technical drawings of a component with various views and dimensions. It features a dual-in-line package with a connector and a chip on a circuit board.
Preview: The image displays a technical drawing of a dual in-line package with dimensions. It shows a marked component seated on a green circuit board, and a connecting wire.
Preview: The image shows technical drawings of a
Preview: The image displays technical drawings of cartridges with a chrome-plated surface, designed for plastic rivets. Dimensions and views from various perspectives are shown.
Preview: The image displays technical drawings of chrome coatings for special tools. Various views of an attachment designed for plastic rivets are depicted.
Preview: The image displays technical drawings of two cartridges with a chrome-colored surface. They are designed for use with plastic rivets. Dimensions are provided.
Preview: The image displays technical drawings of a cartridge for QFP and PLCC packages. It includes dimensions and details of a square base with a structure mounted on it and a thin cable.
Preview: The image shows a pen with a conical tip. There is a side view, a top view, and a detailed view of the tip. The dimensions are given in millimeters.
Preview: The image shows a technical drawing of a pen. It has a conical shape with a pointed, white tip. Dimensions such as diameter and length are provided.
Preview: The image shows a pencil. It has a conical tip, a round shaft, and measures 12 x 0.7 mm. Side view and top view are also shown.
Preview: The image displays a technical drawing of a pen. It has a pointed, conical shape and a labeled area with dimensions that specify lengths and diameters.
Preview: The image displays technical drawings of a curved instrument with a thin, pointed tip. There are measurements in millimeters that describe the size and shape of the object.
Preview: The image shows a technical component with a curved end, which has a cylindrical shape. There are dimensions and a side view of the object. The structure appears smooth and symmetrical.
Preview: The image displays technical drawings of a component. On the left, dimensions are provided, and on the right, a schematic representation shows the connection to a circuit board. An arrow indicates the movement or position.
Preview: The image displays technical drawings of a component. At the top, dimensions and sketches of a head are shown. Below, a wire leads to a circuit board with contact points.
Preview: The image displays technical drawings of a component with various views and dimensions. There are a top view, side views, and closer detailed views.
Preview: The image displays technical drawings of a component with various views and dimensions. Details such as diameter, lengths, and an assembly position on a circuit board are shown.
Preview: The image shows a technical drawing of a pen. It has a pointed tip, a round body, and is shown from various sides with dimensions.
Preview: The image displays a technical drawing of a chisel attachment. It has a conical shape with a flat tip. Dimensions are provided: length 13.5 mm and width 4.8 mm.
Preview: The image shows a technical drawing of a pointed object, possibly a tool. There is a side view, a top view, and a connection that includes dimensions.
Preview: The image displays a technical drawing of a pen with a pointed cap. Dimensions are provided in millimeters. The pen has a slim, elongated shape.
Preview: The image shows a technical drawing of a rework knife. It is a detailed representation with dimensions in mm and a marking on the handle. The blade head is flat and has a special shape.
Preview: The image displays a technical drawing of a pen. It features a pointed tip, a slim body, and a cap. Dimensions are provided in millimeters.
Preview: The image displays technical drawings of a thin, diagonally cut tool with a cylindrical handle. Dimensions are provided to clarify the size and shape.
Preview: The image displays a technical drawing of a pen. The view includes the tip, the shaft, and dimensions such as diameter and length. The pen has a conical shape and is rounded at the top.
Preview: The image shows a technical drawing of a sharp object with a cylindrical body and a narrow tip. It includes dimensions and a top view.
Preview: The image shows a technical drawing of a tool attachment with a pointed end, displayed in multiple perspectives. Dimensions are provided.
Preview: The image shows a technical drawing of a slender, conical tool with a long, thin handle and a pointed working surface. Dimensions are indicated.
Preview: The image displays technical drawings of connectors. In the top right, there is a plug that is inserted into a circuit board, with dimensions and various diameters.
Preview: The image displays a technical drawing of a tool blade. It includes various views, dimensions, and a description of the blade type, along with a detailed sketch.
Preview: The image shows a technical drawing of a connector. Dimensions are provided. On the right, the plug is depicted on a green circuit board, with various connections.
Preview: The image displays technical drawings of a tool or tip. The top left shows dimensions. Below, the tip is seen with a tapered round connection.
Preview: The image shows a technical drawing of an object, likely a pen or tool. It includes side views and dimensions in millimeters, with a curved handle and a pointed tip.
Preview: The image displays technical drawings of a component that has a conical shape and features a narrow slot on one side. Dimensions and labels are provided.
Preview: The image displays technical drawings of a component. It has a cylindrical shape with an elongated, slotted opening at one end. Dimensions are provided, including lengths and diameters.
Preview: The image displays technical drawings of a tool with various views. It features a conical tip and an elongated shape, with dimensions in millimeters.
Preview: The image displays technical diagrams of a component with multiple views. Various dimensions are provided, and a part is highlighted in blue. It is a precise technical drawing.
Preview: The image displays technical drawings of a device with a curved end that has a tip. Dimensions are provided in millimeters and inches to clarify the size and shape.
Preview: The image displays technical drawings of a cylindrical object with a rounded tip. It includes dimensions and a side view that clarifies the shape.
Preview: The image displays technical drawings of a component from various viewing perspectives. It includes dimensions in millimeters and a detailed view of the shape and structure.
Preview: The image displays technical drawings of a tip. It consists of two views: one from the top and one from the side. Additionally, a circuit board with several pins is depicted. Dimensions are provided.
Preview: The image displays a technical drawing of a tool attachment. Various views with dimensions are shown at the top. The attachment has a flat tip and a round handle.
Preview: The image displays technical drawings of a conical object with a tip. Dimensions are provided, including diameter and angle. There is a side view and a top view.
Preview: The image displays technical drawings of a pointed object, likely a pen or tool, with specifications for length and diameter. Three views are depicted.
Preview: The image displays technical drawings of a device with a sharp, conical tip in the foreground. On the left side, dimensions are given in millimeters, while the overall shape is cylindrical.
Preview: The image displays technical drawings of connection plugs and pins. Dimensions are provided that clarify the distances and diameters of the pins. A part is enlarged.
Preview: The image displays technical drawings of a pure nickel soldering tip attachment. The tip has a conical shape, with precise dimensions and a part number on the shaft.
Preview: The image shows a technical drawing of a pen. Various views are displayed: the tip, the casing, and the dimensions. The dimensions are given in millimeters and inches.
Preview: The image displays a technical drawing of a pen with a conical tip. It has a cylindrical shape and features various dimensions that are specified.
Preview: The image displays technical drawings of a tool attachment. It features a conical shape with dimensions and labeling. There is a top view and a side view.
Preview: The image displays a technical drawing of a tool head. It features a wide, flat blade with a round handle. Dimensions are provided in millimeters: length 37 mm, width 10 mm.
Preview: The image displays technical drawings of a component with various views. There are dimensions in millimeters and a sectional view. One side is marked as
Preview: The image displays technical drawings with dimensions of a component. There is a side view, a top view of a green base with two pins, and a detailed view of a tool.
Preview: The image displays a technical drawing of a pen with a pointed end. It has a cylindrical shape, with a description of the dimensions and details that clarify the size and shape.
Preview: The image shows a technical drawing of a tool attachment with a sharp, curved shape. Dimensions in millimeters are provided, describing the dimensions of the attachment.
Preview: The image displays a technical drawing of a marker pen. The top shows the tip view and the side view, with dimensions. Below, the length of the pen is visible.
Preview: The image displays technical drawings of a device. There are a side view, a top view, and an end view. The device has a tapered shape and is thinner in the middle. Dimensions are provided.
Preview: The image shows a technical drawing of a tool. It has a conical head with a wide tip and an elongated handle. Dimensions and designation are provided.
Preview: The image displays a technical drawing of a tool attachment. The top shows the front view and the top view, the middle features the entire attachment, and the bottom provides a detailed view of the tip. Dimensions are provided.
Preview: The image shows a technical drawing draft of an object with a sharp, conical shape. Dimensions are provided in millimeters. The body is cylindrical and has a smooth surface.
Preview: The image displays a technical drawing of a tool with three viewing perspectives: front, side, and top view. It features a slender shape and ends with a pointed tip. Dimensions are included.
Preview: The image shows a technical drawing of a pen with a conical tip. Dimensions are given in millimeters. The pen has a round, ergonomic body and a fine, pointed writing lead.
Preview: The image displays a technical drawing of a tool attachment with a curved end. Dimensions and details of the design are shown, including a sketch of the main part and the tip area.
Preview: The image displays technical drawings of a special tool. It features a curved handle and a pointed, narrow working surface. Dimensions are provided in millimeters.
Preview: The image shows technical drawings of a tool attachment with a curved end. It includes dimensions in mm and inches as well as a side and a top view.
Preview: The image displays a technical drawing of a cylindrical object with a rounded end. Dimensions are provided, and the object features a straight, narrow connector. The representation is three-dimensional.
Preview: The image displays technical drawings of a tool with a narrow, curved tip and a cylindrical handle. Dimensions are also provided, both in millimeters and inches.
Preview: The image displays a technical drawing of a tool with a sharp, conical tip. Dimensions and details are provided on the drawing that explain the shape and size of the tool.
Preview: The image displays a technical drawing of an instrument. It features a cylindrical handle and a pointed, flat blade. Dimensions are provided to clarify the size.
Preview: The image displays a narrow object with a conical end and a flat, rounded head. Dimensions are provided in millimeters, along with a part designation on the side.
Preview: The image displays a graphic design of a pen with a round tip. Three views are presented: front view, side view, and top view. Dimensions are provided.
Preview: The image displays a technical drawing of a tool sheet with dimensions. It shows a flat blade with a handle attached on one side.
Preview: The image shows a technical drawing of a measuring device with a flat blade attachment. It includes dimensions and views of the attachment as well as the handle. Sketches are presented in a precise, schematic representation.
Preview: The image displays a technical drawing of a precise, narrow tool with a conical tip. The body is long and cylindrical, with measurements in millimeters and inches.
Preview: The image shows a technical drawing of a sharp object, apparently a needle or a similar tool. There are three views: the side view, the top view, and a close-up of the tip area. Dimensions are provided.
Preview: The image displays a technical drawing of a mini-spoon attachment. The attachment features an oval opening and is mounted on a cylindrical handle. Dimensions are labeled.
Preview: The image displays technical drawings of an object, likely a pen or tool. There are views from the side, top, and a detailed view. Dimensions are provided.
Preview: The image displays various views of a precise, sharp tool or attachment with ????? dimensions. The attachment has a narrow, conical shape and is made of a solid material.
Preview: The image shows a technical drawing of a conical object with precise dimensions. It has a pointed shape, is thicker at the top, and tapers towards the bottom. Dimensions are provided in millimeters.
Preview: The image displays a technical drawing of a small spoon tip. It features an oval opening and measures approximately 10.5 mm in width and 3.8 mm in height.
Preview: The image displays various views of a sharp, angled tip. There are measurements for the length and diameter, as well as a detailed representation of the shape.
Preview: The image shows a technical pen from various perspectives. The pen has a conical tip and a round body. There is a model number on the body. Dimensions are provided.
Preview: The image shows a technical drawing of a pen. It features a sharp, conical tip and an elongated body. Dimensions and labels are included.
Preview: The image displays technical drawings of a tool from various perspectives. It features a round handle and a pointed, angled tip for precise applications. Dimensions are provided.
Preview: The image shows different views of an angled tip tool. It includes measurements for diameter and length, as well as a detailed view of the tip. The shapes are technical and precise.
Preview: The image displays technical drawings of a sharp, elongated object with a conically tapered tip. Dimensions in millimeters are provided, illustrating the size and shape of the object.
Preview: The image displays various views of the angled tips of a tool. It includes measurements for diameter and length, as well as a representation of the tip and the handle.
Preview: The image shows a technical drawing of an object with a tapered end and a cylindrical body. Dimensions in millimeters are provided, including diameter and length.
Preview: The image displays a technical drawing of a fine nozzle tool. It features a conical head with a narrow opening and a cylindrical handle. Dimensions are provided.
Preview: The image displays a technical drawing of a thin, curved instrument with a slender handle. Dimensions are provided that indicate the diameter and length of the tool.
Preview: The image shows a technical drawing of a
Preview: The image shows a technical drawing of an object with a rounded end, an elongated shape in the middle, and various views including dimensions in millimeters.
Preview: The image shows a technical drawing of a square sensor with a tube adjoining a square base. It includes measurements in millimeters.
Preview: The image displays a technical drawing of a tool attachment. It features a conical shape with a pointed, narrow opening and detailed dimensions in millimeters.
Preview: The image displays technical drawings of a thin pen. It has a sharp, conical shape and a body that widens at one end. The dimensions are provided.
Preview: The image displays technical drawings of a pen. It features a sharp tip, a thick grip, and dimensions on one side. The drawings are shown in various views.
Preview: The image displays a technical drawing of a pen or tip with a conical end. It includes measurements and a side view that depict the shape and dimensions.
Preview: The image displays a technical drawing of an object, likely a tool. It includes multiple views: a side view, a top view, and a perspective with dimensions.
JBC Soldering tips for T245
The image displays a technical diagram of an object with a conical end. It includes side views and dimensions in millimeters. The lines are clear and schematic.
Soldering tip C245-001
Head size: 0.6 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
The image displays technical drawings of soldering tips from various perspectives. Dimensions are provided that describe the shape and size of the tips, intended for use with QFP packages.
Gullwing tip C245-009
Head size: 4.5 x 1.8 mm / Soldering tip shape: gullwing , straight / suitable soldering iron: T245
The image displays technical drawings of soldering cartridges for PLCC packages. Various views and dimensions are shown, explaining the shape and size of the component.
Gullwing tip C245-010
Head size: 4.5 x 1.8 mm / Soldering tip shape: gullwing , bent / suitable soldering iron: T245
The image displays technical drawings of chip components. There is a side view of a component that is inserted into a circuit board, as well as dimensions in millimeters.
SMD desoldering tip C245-016
Head size: 0.6 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of chip components. Various shapes and sizes are depicted, including a cylindrical or rectangular element and a circuit board with components. Dimensions are provided.
SMD desoldering tip C245-017
Head size: 2.2 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays a technical drawing of chip components on a circuit board. It includes dimensions and a depiction of a connection, along with detailed views of the components.
SMD desoldering tip C245-018
Head size: 3.4 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a technical drawing of components on a circuit board. There are several small components arranged on a green board piece, with dimensions in mm and inches.
SMD desoldering tip C245-019
Head size: 4.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a technical drawing of a thin, pointed tool with a conical attachment. Dimensions for length and diameter are provided.
Soldering tip C245-029
Head size: 0.4 mm / Soldering tip shape: pointed , bent / suitable soldering iron: T245
The image shows a technical drawing of a sharp object, possibly a pen or tool. It includes dimensions and a detailed view of the tip.
Soldering tip C245-030
Head size: 0.3 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
The image displays a technical drawing of a sharp, cylindrical object with dimensions. It features a conical head and a narrow, elongated shape.
Soldering tip C245-032
Head size: 0.4 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
The image displays a technical drawing of a pen. The tip is shown at the top in various views. Dimensions and details are provided in millimeters.
Soldering tip C245-034
Head size: 0.4 mm / Soldering tip shape: pointed , bent / suitable soldering iron: T245
The image displays a sharp, cylindrical object with a narrow end. It has a thicker base and is likely a tool or a tip. Dimensions are shown in millimeters.
Soldering tip C245-036
Head size: 0.5 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
The image shows a technical drawing of a sharp tip with an additional tinned area. It is slender and has a rounded base. Dimensions are also provided.
Special soldering tip C245-041
Head size: 1.0 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
The image displays technical drawings of cartridges for plastic rivets. Dimensions and volume are provided, with a focus on the design and structure of the cartridges.
Special soldering tip C245-052
Head size: 6.0 x 4.9 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of cartridges with a chrome-plated surface, designed for plastic rivets. It includes dimensions and a representation of the rivet volume.
Special soldering tip C245-053
Head size: 5.0 x 3.8 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings with dimensions for cartridges with a chromatic surface, used in plastic engineering. There is a groove design and a green block.
Special soldering tip C245-054
Head size: 7.0 x 6.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a technical drawing of a sharp object with a diameter of 3.5 mm, a length of 10.5 mm, and a 60-degree angle at the tip.
Soldering tip C245-056
Head size: 3.4 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image shows a technical drawing of a tool with an elongated body and a pointed, angled edge. Dimensions are provided, including lengths and diameters in millimeters.
Soldering tip C245-061
Head size: 3.0 x 1.0 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: T245
The image shows a technical drawing of a specialized tool with a pointed tip. It features a thin, nickel-plated area and specifications for diameter and length.
Soldering tip C245-064
Head size: 1.3 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays technical drawings of a component, likely a connector. There are various views and dimensions, the shape is slim and cylindrical with different ends.
Gullwing tip C245-067
Head size: 2.3 mm / Soldering tip shape: gullwing , bent / suitable soldering iron: T245
The image shows a technical drawing of a special iron-coated tip for robots. The tip has a wedge-shaped edge and is shown in two views: side and top.
Soldering tip C245-069
Head size: 5.0 x 1.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a special pen with various tip shapes. The dimensions are provided in millimeters, highlighted by dimension lines.
Soldering tip C245-102
Head size: 2.0 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays a technical drawing draft of an object with a conical tip, a diameter of 3 mm, and varying lengths. Dimensions are specified precisely.
Soldering tip C245-107
Head size: 3.0 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
The image displays a technical drawing of a tool with a conical, chrome-plated head, suitable for processing plastics. Dimensions are provided.
Special soldering tip C245-109
Head size: 4.3 x 0.1 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a fastener sketch with two views (A and B). It includes dimensions and details for soldering pins in a connector.
Special soldering tip C245-116
Head size: 3.0 mm / Soldering tip shape: gullwing , bent / suitable soldering iron: T245
The image displays technical drawings of a special soldering cartridge. It includes dimensions in millimeters and inches, as well as the shape of the cartridge with a round end and a wider middle.
Special soldering tip C245-117
Head size: 1.45 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays a technical drawing of a cable soldering tool. It includes various views and dimensions of the tip used for soldering cables.
SMD Special soldering tip C245-118
Head size: 2.5 x 0.8 mm / Soldering tip shape: special forme / suitable soldering iron: T245
The image displays technical drawings of a Teflon-coated pen. It includes views from the side, top, and bottom, with measurements. The pen has a pointed shape.
Soldering tip C245-119
Head size: 1.0 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
The image shows technical drawings of a small tool, likely a needle or a probe. It includes dimensions and views from various perspectives.
Special soldering tip C245-121
Head size: 13.0 x 0.65 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a technical drawing of an object that looks like a sharp nozzle. It has a cylindrical body with a narrow end and is dimensioned. Various views are depicted.
Special soldering tip C245-122
Head size: 1.5 x 0.5 mm / Soldering tip shape: special forme / suitable soldering iron: T245
The image displays a technical drawing of cassettes with a chrome-plated surface, designed for the use of plastic rivets. Dimensions are visible.
Special soldering tip C245-123
Head size: 4.0 x 4.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a technical drawing of a tool with rounded ends and precise measurements. It is intended for plastic riveting pliers and has a chrome-plated surface.
Special soldering tip C245-124
Head size: 4.25 x 2.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a technical drawing of a tool with a pointed end, a cylindrical handle, and measurements. Various views of the tool are depicted.
Soldering tip C245-126
Head size: 0.4 mm / Soldering tip shape: pointed , bent / suitable soldering iron: T245
The image shows a technical drawing of a micro tactile switch from Panasonic. It includes different views of the switch and dimensions in millimeters.
SMD desoldering tip C245-136
Head size: 7.1 x 6.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays a technical drawing of a cutting cartridge for rubber and plastic. It includes dimensions and a schematic representation that clarifies the shape and application of the cartridge.
SMD Special soldering tip C245-138
Head size: 12.0 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T245
The image displays a technical drawing of a connector. At the top is the plug with dimensions, followed by a circuit board with components below. Measurements are provided in both mm and inches.
SMD Special desoldering tip C245-150
Head size: 2.3 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a technical drawing of a pen. It has a pointed tip and a cylindrical casing. Dimensions in millimeters are indicated on the longitudinal side.
Soldering tip C245-201
Head size: 0.6 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
The image shows a technical drawing of a tool, consisting of a long, narrow handle and a pointed, conical tip. The dimensions are provided.
Soldering tip C245-234
Soldering tip shape: pointed , bent / suitable soldering iron: T245
The image displays a technical drawing of a component with dimensions. It consists of a rectangular base with a long, narrow connector that is mounted on a circuit board.
SMD desoldering tip C245-215
Head size: 18.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of an electronic component with a cylindrical connector, a small green package, and precise measurements in millimeters.
SMD desoldering tip C245-220
Head size: 6.0 x 5.4 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of a DUAL IN LINE connector. Dimensions in mm are provided, showing the sizes of both the connector and the circuit board. The connector has a cylindrical shape and is attached to a circuit board.
SMD desoldering tip C245-221
suitable soldering iron: T245
The image shows a technical drawing of a dual in-line component with dimensions. It includes a connector seated on a circuit board and is shown in two views.
SMD desoldering tip C245-222
suitable soldering iron: T245
The image displays technical drawings of a cartridge for QFP and PLCC cases. Dimensions are provided in millimeters, as well as the shape of the cartridge and a green chip.
SMD desoldering tip C245-223
suitable soldering iron: T245
The image displays a technical drawing of a cartridge system for QFP and PLCC packages, with dimensions and a side view. A wire connects the cartridge to a control surface.
SMD desoldering tip C245-224
suitable soldering iron: T245
The image shows a technical drawing of a component with various dimensions. At the top, there is a casing visible, which sits on a green PCB, and below it, there is a tool connected by cables.
SMD desoldering tip C245-226
suitable soldering iron: T245
The image displays a technical drawing of a cartridge for QFP and PLCC packages. It shows dimensions and the shape of the device. A detail indicates the connection and the dimensions.
SMD desoldering tip C245-227
suitable soldering iron: T245
The image displays a technical drawing of a container for QFP and PLCC packages. It includes dimensions in millimeters and inches, as well as a schematic connection.
SMD desoldering tip C245-228
suitable soldering iron: T245
The image displays technical drawings of PLCC sockets. The top shows dimensions and a square component with 44 contact points. An additional cable is also illustrated.
SMD desoldering tip C245-247
suitable soldering iron: T245
The image displays technical drawings of PLCC cartridges. At the top are two views of a square connector with 32 contact positions. Below there is a description with dimensions in mm and inches.
SMD desoldering tip C245-248
suitable soldering iron: T245
The image displays technical drawings of a connector. At the top, dimensions and a 3D representation of the plug are visible. Below, there is a top view of the circuit board with connection.
SMD desoldering tip C245-250
suitable soldering iron: T245
The image displays a technical diagram of a pen with a conical tip. Dimensions are provided: diameter and length measurements in millimeters. The view is shown from both the front and the side.
Soldering tip C245-256
Soldering tip shape: round , sloped / suitable soldering iron: T245
The image shows a technical drawing of a precise tool with a long, narrow handle and a targeted, curved tip. Dimensions are indicated.
Soldering tip C245-259
Soldering tip shape: round , bent / suitable soldering iron: T245
The image displays a technical drawing of a device with a curved end and a straight body. The dimensions are provided, including diameter and length.
Soldering tip C245-260
Soldering tip shape: round , bent / suitable soldering iron: T245
The image displays technical drawings of a tool with a pointed end. There are front, side, and detailed views. Dimensions are provided. The shape is ergonomic.
Soldering tip C245-261
Head size: 3.0 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a special soldering tip. It has a pointed, narrow shape and is used for quick soldering. Dimensions are provided in millimeters.
Special soldering tip C245-268
Head size: 5.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image displays technical drawings of soldering tips. One tip has a conical shape with a large contact area. The dimensions are provided, including a detailed sectional view and a top view.
Soldering tip C245-301
Head size: 8.8 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays technical drawings of a component called
SMD desoldering tip C245-303
Head size: 6.5 x 6.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of a component with various views and dimensions. It features a dual-in-line package with a connector and a chip on a circuit board.
SMD desoldering tip C245-304
Head size: 15.0 x 9.6 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays a technical drawing of a dual in-line package with dimensions. It shows a marked component seated on a green circuit board, and a connecting wire.
SMD desoldering tip C245-305
Head size: 12.0 x 9.6 mm / Soldering tip shape: special forme / suitable soldering iron: T245
The image shows technical drawings of a
SMD desoldering tip C245-306
Head size: 10.0 x 9.6 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of cartridges with a chrome-plated surface, designed for plastic rivets. Dimensions and views from various perspectives are shown.
Special soldering tip C245-311
Head size: 20-0 x 6.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of chrome coatings for special tools. Various views of an attachment designed for plastic rivets are depicted.
Special soldering tip C245-312
Head size: 3.2 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of two cartridges with a chrome-colored surface. They are designed for use with plastic rivets. Dimensions are provided.
Special soldering tip C245-313
Head size: 4.1 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of a cartridge for QFP and PLCC packages. It includes dimensions and details of a square base with a structure mounted on it and a thin cable.
SMD desoldering tip C245-315
Head size: 15.0 x 15.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a pen with a conical tip. There is a side view, a top view, and a detailed view of the tip. The dimensions are given in millimeters.
Soldering tip C245-403
Head size: 1.0 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
The image shows a technical drawing of a pen. It has a conical shape with a pointed, white tip. Dimensions such as diameter and length are provided.
Soldering tip C245-405
Head size: 1.5 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image shows a pencil. It has a conical tip, a round shaft, and measures 12 x 0.7 mm. Side view and top view are also shown.
Soldering tip C245-406
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a technical drawing of a pen. It has a pointed, conical shape and a labeled area with dimensions that specify lengths and diameters.
Soldering tip C245-407
Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a curved instrument with a thin, pointed tip. There are measurements in millimeters that describe the size and shape of the object.
Soldering tip C245-627
Head size: 3.0 mm / Soldering tip shape: tapered , bent / suitable soldering iron: T245
The image shows a technical component with a curved end, which has a cylindrical shape. There are dimensions and a side view of the object. The structure appears smooth and symmetrical.
Soldering tip C245-628
Head size: 4.0 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
The image displays technical drawings of a component. On the left, dimensions are provided, and on the right, a schematic representation shows the connection to a circuit board. An arrow indicates the movement or position.
Special soldering tip C245-651
Head size: 4.0 x 3.25 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of a component. At the top, dimensions and sketches of a head are shown. Below, a wire leads to a circuit board with contact points.
Special soldering tip C245-654
Head size: 3.5 x 2.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of a component with various views and dimensions. There are a top view, side views, and closer detailed views.
Special soldering tip C245-667
Head size: 4.0 x 3.25 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of a component with various views and dimensions. Details such as diameter, lengths, and an assembly position on a circuit board are shown.
Special soldering tip C245-669
Head size: 3.5 x 3.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image shows a technical drawing of a pen. It has a pointed tip, a round body, and is shown from various sides with dimensions.
Soldering tip C245-673
Head size: 0.8 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a technical drawing of a chisel attachment. It has a conical shape with a flat tip. Dimensions are provided: length 13.5 mm and width 4.8 mm.
Soldering tip C245-708
Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image shows a technical drawing of a pointed object, possibly a tool. There is a side view, a top view, and a connection that includes dimensions.
Soldering tip C245-710
Head size: 1.2 mm / Soldering tip shape: tapered , sloped / suitable soldering iron: T245
The image displays a technical drawing of a pen with a pointed cap. Dimensions are provided in millimeters. The pen has a slim, elongated shape.
Soldering tip C245-729
Head size: 2.7 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image shows a technical drawing of a rework knife. It is a detailed representation with dimensions in mm and a marking on the handle. The blade head is flat and has a special shape.
SMD special soldering tip C245-730
Head size: 10.0 x 1.2 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays a technical drawing of a pen. It features a pointed tip, a slim body, and a cap. Dimensions are provided in millimeters.
Soldering tip C245-731
Head size: 0.6 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a thin, diagonally cut tool with a cylindrical handle. Dimensions are provided to clarify the size and shape.
Soldering tip C245-732
Head size: 3.2 x 1.5 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image displays a technical drawing of a pen. The view includes the tip, the shaft, and dimensions such as diameter and length. The pen has a conical shape and is rounded at the top.
Soldering tip C245-742
Head size: 0.8 x 0.6 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image shows a technical drawing of a sharp object with a cylindrical body and a narrow tip. It includes dimensions and a top view.
Soldering tip C245-747
Head size: 0.6 mm / Soldering tip shape: tapered , sloped / suitable soldering iron: T245
The image shows a technical drawing of a tool attachment with a pointed end, displayed in multiple perspectives. Dimensions are provided.
Special soldering tip C245-748
Head size: 0.6 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image shows a technical drawing of a slender, conical tool with a long, thin handle and a pointed working surface. Dimensions are indicated.
Special soldering tip C245-749
Head size: 0.6 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays technical drawings of connectors. In the top right, there is a plug that is inserted into a circuit board, with dimensions and various diameters.
Special soldering tip C245-751
Head size: 4.0 x 3.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image displays a technical drawing of a tool blade. It includes various views, dimensions, and a description of the blade type, along with a detailed sketch.
Soldering tip C245-752
Head size: 15.0 x 2.4 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T245
The image shows a technical drawing of a connector. Dimensions are provided. On the right, the plug is depicted on a green circuit board, with various connections.
Special soldering tip C245-754
Head size: 3.5 x 2.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image displays technical drawings of a tool or tip. The top left shows dimensions. Below, the tip is seen with a tapered round connection.
Soldering tip C245-755
Head size: 4.0 x 0.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image shows a technical drawing of an object, likely a pen or tool. It includes side views and dimensions in millimeters, with a curved handle and a pointed tip.
Soldering tip C245-756
Head size: 4.8 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a component that has a conical shape and features a narrow slot on one side. Dimensions and labels are provided.
Special soldering tip C245-757
Head size: 3.2 x 1.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of a component. It has a cylindrical shape with an elongated, slotted opening at one end. Dimensions are provided, including lengths and diameters.
Special soldering tip C245-758
Head size: 4.3 x 2.5 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays technical drawings of a tool with various views. It features a conical tip and an elongated shape, with dimensions in millimeters.
Soldering tip C245-759
Head size: 2.4 x 0.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical diagrams of a component with multiple views. Various dimensions are provided, and a part is highlighted in blue. It is a precise technical drawing.
Special soldering tip C245-760
Head size: 5.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image displays technical drawings of a device with a curved end that has a tip. Dimensions are provided in millimeters and inches to clarify the size and shape.
Soldering tip C245-761
Head size: 3.0 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image displays technical drawings of a cylindrical object with a rounded tip. It includes dimensions and a side view that clarifies the shape.
Special soldering tip C245-762
Head size: 6.7 x 1.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a component from various viewing perspectives. It includes dimensions in millimeters and a detailed view of the shape and structure.
Soldering tip C245-763
Head size: 4.0 x 2.5 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image displays technical drawings of a tip. It consists of two views: one from the top and one from the side. Additionally, a circuit board with several pins is depicted. Dimensions are provided.
Special soldering tip C245-764
Head size: 0.5 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
The image displays a technical drawing of a tool attachment. Various views with dimensions are shown at the top. The attachment has a flat tip and a round handle.
Soldering tip C245-765
Head size: 6.0 x 0.4 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: T245
The image displays technical drawings of a conical object with a tip. Dimensions are provided, including diameter and angle. There is a side view and a top view.
Soldering tip C245-766
Head size: 5.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image displays technical drawings of a pointed object, likely a pen or tool, with specifications for length and diameter. Three views are depicted.
Soldering tip C245-768
Head size: 1.5 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a device with a sharp, conical tip in the foreground. On the left side, dimensions are given in millimeters, while the overall shape is cylindrical.
Soldering tip C245-770
Head size: 2.4 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of connection plugs and pins. Dimensions are provided that clarify the distances and diameters of the pins. A part is enlarged.
Special soldering tip C245-771
Head size: 0.1 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image displays technical drawings of a pure nickel soldering tip attachment. The tip has a conical shape, with precise dimensions and a part number on the shaft.
Special soldering tip C245-772
Head size: 1.4 x 0.7 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image shows a technical drawing of a pen. Various views are displayed: the tip, the casing, and the dimensions. The dimensions are given in millimeters and inches.
Soldering tip C245-773
Head size: 0.8 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a technical drawing of a pen with a conical tip. It has a cylindrical shape and features various dimensions that are specified.
Soldering tip C245-774
Head size: 1.2 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a tool attachment. It features a conical shape with dimensions and labeling. There is a top view and a side view.
Soldering tip C245-775
Head size: 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a technical drawing of a tool head. It features a wide, flat blade with a round handle. Dimensions are provided in millimeters: length 37 mm, width 10 mm.
Special soldering tip C245-776
Head size: 37.0 x 2.4 mm / Soldering tip shape: blade tip / suitable soldering iron: T245
The image displays technical drawings of a component with various views. There are dimensions in millimeters and a sectional view. One side is marked as
Soldering tip C245-784
Head size: 2.8 mm / Soldering tip shape: sloped , tapered / suitable soldering iron: T245
The image displays technical drawings with dimensions of a component. There is a side view, a top view of a green base with two pins, and a detailed view of a tool.
Soldering tip C245-785
Head size: 3.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: T245
The image displays a technical drawing of a pen with a pointed end. It has a cylindrical shape, with a description of the dimensions and details that clarify the size and shape.
Soldering tip C245-803
Head size: 1.0 mm / Soldering tip shape: tapered , straight / suitable soldering iron: T245
The image shows a technical drawing of a tool attachment with a sharp, curved shape. Dimensions in millimeters are provided, describing the dimensions of the attachment.
Soldering tip C245-804
Head size: 1.0 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
The image displays a technical drawing of a marker pen. The top shows the tip view and the side view, with dimensions. Below, the length of the pen is visible.
Soldering tip C245-806
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a device. There are a side view, a top view, and an end view. The device has a tapered shape and is thinner in the middle. Dimensions are provided.
Soldering tip C245-807
Head size: 2.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image shows a technical drawing of a tool. It has a conical head with a wide tip and an elongated handle. Dimensions and designation are provided.
Soldering tip C245-808
Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a technical drawing of a tool attachment. The top shows the front view and the top view, the middle features the entire attachment, and the bottom provides a detailed view of the tip. Dimensions are provided.
Soldering tip C245-811
Head size: 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image shows a technical drawing draft of an object with a sharp, conical shape. Dimensions are provided in millimeters. The body is cylindrical and has a smooth surface.
Soldering tip C245-812
Head size: 3.0 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays a technical drawing of a tool with three viewing perspectives: front, side, and top view. It features a slender shape and ends with a pointed tip. Dimensions are included.
Soldering tip C245-844
Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image shows a technical drawing of a pen with a conical tip. Dimensions are given in millimeters. The pen has a round, ergonomic body and a fine, pointed writing lead.
Soldering tip C245-845
Head size: 2.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays a technical drawing of a tool attachment with a curved end. Dimensions and details of the design are shown, including a sketch of the main part and the tip area.
Soldering tip C245-846
Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image displays technical drawings of a special tool. It features a curved handle and a pointed, narrow working surface. Dimensions are provided in millimeters.
Soldering tip C245-862
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image shows technical drawings of a tool attachment with a curved end. It includes dimensions in mm and inches as well as a side and a top view.
Soldering tip C245-863
Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image displays a technical drawing of a cylindrical object with a rounded end. Dimensions are provided, and the object features a straight, narrow connector. The representation is three-dimensional.
Soldering tip C245-866
Head size: 6.6 x 1.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a tool with a narrow, curved tip and a cylindrical handle. Dimensions are also provided, both in millimeters and inches.
Soldering tip C245-904
Head size: 1.0 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
The image displays a technical drawing of a tool with a sharp, conical tip. Dimensions and details are provided on the drawing that explain the shape and size of the tool.
Soldering tip C245-905
Head size: 1.5 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays a technical drawing of an instrument. It features a cylindrical handle and a pointed, flat blade. Dimensions are provided to clarify the size.
Soldering tip C245-908
Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a narrow object with a conical end and a flat, rounded head. Dimensions are provided in millimeters, along with a part designation on the side.
Soldering tip C245-911
Head size: 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a graphic design of a pen with a round tip. Three views are presented: front view, side view, and top view. Dimensions are provided.
Soldering tip C245-912
Head size: 3.0 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays a technical drawing of a tool sheet with dimensions. It shows a flat blade with a handle attached on one side.
SMD Soldering tip C245-913
Head size: 21.0 x 2.4 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T245
The image shows a technical drawing of a measuring device with a flat blade attachment. It includes dimensions and views of the attachment as well as the handle. Sketches are presented in a precise, schematic representation.
SMD Soldering tip C245-914
Head size: 10.0 x 2.4 mm / Soldering tip shape: blade tip / suitable soldering iron: T245
The image displays a technical drawing of a precise, narrow tool with a conical tip. The body is long and cylindrical, with measurements in millimeters and inches.
Soldering tip C245-929
Head size: 0.6 mm / Soldering tip shape: pointed , bent / suitable soldering iron: T245
The image shows a technical drawing of a sharp object, apparently a needle or a similar tool. There are three views: the side view, the top view, and a close-up of the tip area. Dimensions are provided.
Soldering tip C245-930
Head size: 0.5 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T245
The image displays a technical drawing of a mini-spoon attachment. The attachment features an oval opening and is mounted on a cylindrical handle. Dimensions are labeled.
Gullwing tip C245-931
Head size: 2.7 mm / Soldering tip shape: gullwing , sloped / suitable soldering iron: T245
The image displays technical drawings of an object, likely a pen or tool. There are views from the side, top, and a detailed view. Dimensions are provided.
Soldering tip C245-933
Head size: 2.2 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
The image displays various views of a precise, sharp tool or attachment with ????? dimensions. The attachment has a narrow, conical shape and is made of a solid material.
Soldering tip C245-935
Head size: 0.8 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
The image shows a technical drawing of a conical object with precise dimensions. It has a pointed shape, is thicker at the top, and tapers towards the bottom. Dimensions are provided in millimeters.
Soldering tip C245-937
Head size: 0.6 mm / Soldering tip shape: round , bent / suitable soldering iron: T245
The image displays a technical drawing of a small spoon tip. It features an oval opening and measures approximately 10.5 mm in width and 3.8 mm in height.
Gullwing tip C245-938
Head size: 3.8 mm / Soldering tip shape: gullwing , sloped / suitable soldering iron: T245
The image displays various views of a sharp, angled tip. There are measurements for the length and diameter, as well as a detailed representation of the shape.
Soldering tip C245-939
Head size: 6.0 x 0.4 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: T245
The image shows a technical pen from various perspectives. The pen has a conical tip and a round body. There is a model number on the body. Dimensions are provided.
Soldering tip C245-943
Head size: 1.7 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
The image shows a technical drawing of a pen. It features a sharp, conical tip and an elongated body. Dimensions and labels are included.
Soldering tip C245-945
Head size: 2.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays technical drawings of a tool from various perspectives. It features a round handle and a pointed, angled tip for precise applications. Dimensions are provided.
Soldering tip C245-946
Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image shows different views of an angled tip tool. It includes measurements for diameter and length, as well as a detailed view of the tip. The shapes are technical and precise.
SMD Soldering tip C245-949
Head size: 32.0 x 0.4 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T245
The image displays technical drawings of a sharp, elongated object with a conically tapered tip. Dimensions in millimeters are provided, illustrating the size and shape of the object.
Soldering tip C245-951
Head size: 3.8 mm / Soldering tip shape: round , sloped / suitable soldering iron: T245
The image displays various views of the angled tips of a tool. It includes measurements for diameter and length, as well as a representation of the tip and the handle.
Soldering tip C245-955
Head size: 13.0 x 0.5 mm / Soldering tip shape: blade tip / suitable soldering iron: T245
The image shows a technical drawing of an object with a tapered end and a cylindrical body. Dimensions in millimeters are provided, including diameter and length.
Soldering tip C245-957
Head size: 0.8 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
The image displays a technical drawing of a fine nozzle tool. It features a conical head with a narrow opening and a cylindrical handle. Dimensions are provided.
Soldering tip C245-962
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image displays a technical drawing of a thin, curved instrument with a slender handle. Dimensions are provided that indicate the diameter and length of the tool.
Soldering tip C245-963
Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: T245
The image shows a technical drawing of a
Gullwing tip C245-965
Head size: 1.9 mm / Soldering tip shape: gullwing / suitable soldering iron: T245
The image shows a technical drawing of an object with a rounded end, an elongated shape in the middle, and various views including dimensions in millimeters.
Soldering tip C245-966
Head size: 6.6 x 1.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image shows a technical drawing of a square sensor with a tube adjoining a square base. It includes measurements in millimeters.
Solder pot tip C245-SP01
Head size: 18.0 x 10.0 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T245
The image displays a technical drawing of a tool attachment. It features a conical shape with a pointed, narrow opening and detailed dimensions in millimeters.
Soldering tip C245-741
Head size: 2.4 x 0.6 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays technical drawings of a thin pen. It has a sharp, conical shape and a body that widens at one end. The dimensions are provided.
Soldering tip C245-903
Head size: 1.0 mm / Soldering tip shape: round , straight / suitable soldering iron: T245
The image displays technical drawings of a pen. It features a sharp tip, a thick grip, and dimensions on one side. The drawings are shown in various views.
Soldering tip C245-906
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a technical drawing of a pen or tip with a conical end. It includes measurements and a side view that depict the shape and dimensions.
Soldering tip C245-907
Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245
The image displays a technical drawing of an object, likely a tool. It includes multiple views: a side view, a top view, and a perspective with dimensions.
Soldering tip C245-944
Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T245

155 Products
Product No.: JBC-C245-907
from 35.30 CHF
excl. 8.1% tax
to the product family
The image displays technical drawings of a tool, including a side and top view. It features a pointed shape with dimensions provided in mm.
Preview: The image displays a technical drawing of a precise pen with a pointed tip. The pen has a cylindrical shape and various views, including dimensions.
Preview: The image shows a technical drawing of a precision tool with a thin, conical tip. The dimensions are provided, including a diameter of 0.2 mm.
Preview: The image shows a technical drawing of a pen with a conical tip. There are views from the side and top. Dimensions are visible, including diameter and length.
Preview: The image displays technical drawings of a tapered tool with a curved end. It includes dimensions and a specific model number. The shapes are clearly defined, with a detailed view.
Preview: The image displays technical drawings of a sharp object, likely a pen. There are views from the side, from above, and a detailed view of the pointed end. Dimensions are provided.
Preview: The image shows an elongated, conical tip attached to a narrow body. The tip is bright and round, while the body is slightly thick and grayish. Dimensions are provided.
Preview: The image displays a technical drawing diagram of a tool. Two views are depicted: a side view and a top view. Dimensions are provided.
Preview: The image displays a technical design of a precision tool with a sharp tip. Dimensions are provided, including diameter and length. It has an ergonomic shape for the handle.
Preview: The image displays technical drawings of a tool attachment from multiple perspectives with dimensions. It consists of a cylindrical part and a curved, narrow working surface.
Preview: The image displays a technical drawing of a fine tool with two different views. It features a conical tip and is labeled in both millimeters and inches for scale.
Preview: The image displays technical drawings of a soldering tip with dimensions in millimeters. Views A and B show different perspectives of the soldering tip.
Preview: The image shows a pencil with a sharp point. Various views (side and top) are displayed at the top. Dimensions in millimeters and inches are provided.
Preview: The image displays technical drawings of a cylindrical part with diameters and lengths. It includes views from various sides and a detailed measurement unit in millimeters.
Preview: The image displays technical drawings of a tool attachment. It has a pointed shape with straight and angled edges. Dimensions are provided in millimeters and inches.
Preview: The image shows a technical drawing with a soldering tip, dimensions, and a green circuit board layout with small components. The measurements are provided in both millimeters and inches.
Preview: The image displays technical drawings. At the top, there is a pointed tool, below are narrow circuit paths on a board. On the right, a chip with solder connections. Below, a tool with markings.
Preview: The image displays a technical drawing of a tool with a sharp, conical edge. It includes dimensions and a written code. The shape is cylindrical with a protruding tip.
Preview: The image displays a technical drawing of a pen. There are several views: a side view, a top view, and a detailed view of the tip. Dimensions are provided.
Preview: The image displays technical drawings of a pen with a conical end. It includes dimensions and details about the shape, including a side view and markings on the body.
Preview: The image displays technical drawings of a component with various views and dimensions, including a hose connection and a detailed view of the design.
Preview: The image displays technical drawings of a tool, including a side and top view. It features a pointed shape with dimensions provided in mm.
Preview: The image displays technical drawings of a pointed object, likely a pen. It shows views from the top, side, and bottom, with measurements.
Preview: The image displays a technical drawing of a fine pen or needle. It features a sharp, conical shape with a diameter of 0.5 mm and a length of 6 mm. Various views are presented.
Preview: The image displays various views of a pen. At the top are the front and back views, followed by the side view with dimensions below. The pen features a fine tip and a round body.
JBC Soldering tips for C210
The image displays a technical drawing of a precise pen with a pointed tip. The pen has a cylindrical shape and various views, including dimensions.
Soldering tip C210-001
Head size: 0.3 mm / Soldering tip shape: straight , pointed / suitable soldering iron: T210
The image shows a technical drawing of a precision tool with a thin, conical tip. The dimensions are provided, including a diameter of 0.2 mm.
Soldering tip C210-002
Head size: 0.2 mm / Soldering tip shape: bent , pointed / suitable soldering iron: T210
The image shows a technical drawing of a pen with a conical tip. There are views from the side and top. Dimensions are visible, including diameter and length.
Soldering tip C210-003
Head size: 0.6 mm / Soldering tip shape: straight , pointed / suitable soldering iron: T210
The image displays technical drawings of a tapered tool with a curved end. It includes dimensions and a specific model number. The shapes are clearly defined, with a detailed view.
Soldering tip C210-004
Head size: 0.7 mm / Soldering tip shape: bent , pointed / suitable soldering iron: T210
The image displays technical drawings of a sharp object, likely a pen. There are views from the side, from above, and a detailed view of the pointed end. Dimensions are provided.
Soldering tip C210-005
Head size: 1.0 mm / Soldering tip shape: straight , round / suitable soldering iron: T210
The image shows an elongated, conical tip attached to a narrow body. The tip is bright and round, while the body is slightly thick and grayish. Dimensions are provided.
Soldering tip C210-006
Head size: 1.5 mm / Soldering tip shape: sloped , round / suitable soldering iron: T210
The image displays a technical drawing diagram of a tool. Two views are depicted: a side view and a top view. Dimensions are provided.
Soldering tip C210-007
Head size: 2.3 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T210
The image displays a technical design of a precision tool with a sharp tip. Dimensions are provided, including diameter and length. It has an ergonomic shape for the handle.
Soldering tip C210-010
Head size: 0.3 mm / Soldering tip shape: bent , pointed / suitable soldering iron: T210
The image displays technical drawings of a tool attachment from multiple perspectives with dimensions. It consists of a cylindrical part and a curved, narrow working surface.
Soldering tip C210-012
Head size: 2.0 x 0.7 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T210
The image displays a technical drawing of a fine tool with two different views. It features a conical tip and is labeled in both millimeters and inches for scale.
Soldering tip C210-014
Head size: 0.5 mm / Soldering tip shape: bent , pointed / suitable soldering iron: T210
The image displays technical drawings of a soldering tip with dimensions in millimeters. Views A and B show different perspectives of the soldering tip.
Soldering tip C210-015
Head size: 2.3 x 0.8 mm / Soldering tip shape: special forme , bent / suitable soldering iron: T210
The image shows a pencil with a sharp point. Various views (side and top) are displayed at the top. Dimensions in millimeters and inches are provided.
Soldering tip C210-016
Head size: 0.3 mm / Soldering tip shape: straight , pointed / suitable soldering iron: T210
The image displays technical drawings of a cylindrical part with diameters and lengths. It includes views from various sides and a detailed measurement unit in millimeters.
Soldering tip C210-017
Head size: 0.7 mm / Soldering tip shape: special forme , straight / suitable soldering iron: T210
The image displays technical drawings of a tool attachment. It has a pointed shape with straight and angled edges. Dimensions are provided in millimeters and inches.
Soldering tip C210-018
Head size: 3.4 x 0.3 mm / Soldering tip shape: blade tip , sloped / suitable soldering iron: T210
The image shows a technical drawing with a soldering tip, dimensions, and a green circuit board layout with small components. The measurements are provided in both millimeters and inches.
Soldering tip C210-019
Head size: 0.2 x 0.1 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T210
The image displays technical drawings. At the top, there is a pointed tool, below are narrow circuit paths on a board. On the right, a chip with solder connections. Below, a tool with markings.
Soldering tip C210-020
Head size: 0.1 mm / Soldering tip shape: pointed , straight / suitable soldering iron: T210
The image displays a technical drawing of a tool with a sharp, conical edge. It includes dimensions and a written code. The shape is cylindrical with a protruding tip.
Soldering tip C210-022
Head size: 1.3 x 0.4 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T210
The image displays a technical drawing of a pen. There are several views: a side view, a top view, and a detailed view of the tip. Dimensions are provided.
Soldering tip C210-023
Head size: 0.4 x 0.2 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T210
The image displays technical drawings of a pen with a conical end. It includes dimensions and details about the shape, including a side view and markings on the body.
Soldering tip C210-024
Head size: 0.8 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T210
The image displays technical drawings of a component with various views and dimensions, including a hose connection and a detailed view of the design.
Soldering tip C210-025
Head size: 1.1 x 5.0 mm / Soldering tip shape: chisel-shaped , sloped / suitable soldering iron: T210
The image displays technical drawings of a tool, including a side and top view. It features a pointed shape with dimensions provided in mm.
Soldering tip C210-008
Head size: 1.3 x 0.6 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: T210
The image displays technical drawings of a pointed object, likely a pen. It shows views from the top, side, and bottom, with measurements.
Soldering tip C210-009
Head size: 0.2 mm / Soldering tip shape: pointed , slim / suitable soldering iron: T210
The image displays a technical drawing of a fine pen or needle. It features a sharp, conical shape with a diameter of 0.5 mm and a length of 6 mm. Various views are presented.
Soldering tip C210-013
Head size: 0.5 mm / Soldering tip shape: pointed , slim / suitable soldering iron: T210
The image displays various views of a pen. At the top are the front and back views, followed by the side view with dimensions below. The pen features a fine tip and a round body.
Soldering tip C210-021
Head size: 0.6 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: T210

24 Products
Product No.: JBC-C210-008
from 46.60 CHF
excl. 8.1% tax
to the product family
The image displays a technical drawing of a soldering iron with a special tip. Additionally, details of a circuit board with electronic components are shown. Dimensions and labels are also visible.
Preview: The image shows a technical drawing. A tool with a fine tip is depicted. Additionally, two pliers targeting a circuit board with small rectangular components are shown. Dimensions are provided.
Preview: The image displays a technical illustration of soldering tips targeting a circuit board. Details of the tips and the PCB are highlighted. Dimensions are provided.
Preview: The image displays a technical drawing of an electrical component. On the right side, there is a circuit board with four connections. On the left are side views of the component, including dimensions.
Preview: The image shows a technical drawing of a hand tool with a curved end for manipulating electronic components on a green circuit board. Dimensions are provided.
Preview: The image displays technical drawings of a component on a circuit board. It includes various views of the component, along with dimensions in millimeters.
Preview: The image displays technical drawings of two tool tips, C120007 and C120008, as well as a green circuit board with four black components. Dimensions are provided.
Preview: The image displays technical drawings of two components on a circuit board. Next to the board, dimensions and reference numbers of the components are depicted.
Preview: The image shows a technical drawing of soldering tips. Two pointed tools are depicted above a circuit board with various small components. Side views and dimensions are provided.
Preview: The image displays a technical drawing of a conical end piece with dimensions. There is a side view and a top view, both showing the end piece with a nozzle area and a thin cable.
Preview: The image displays a technical drawing of a soldering iron with a special tip. Additionally, details of a circuit board with electronic components are shown. Dimensions and labels are also visible.
Preview: The image shows a technical illustration of a circuit board with several components. Individual parts are enlarged, and a tool is displayed in various views. Dimensions are provided.
JBC Soldering tips C120 for PA120
The image shows a technical drawing. A tool with a fine tip is depicted. Additionally, two pliers targeting a circuit board with small rectangular components are shown. Dimensions are provided.
Soldering tip
Head size: 0.2 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
The image displays a technical illustration of soldering tips targeting a circuit board. Details of the tips and the PCB are highlighted. Dimensions are provided.
Soldering tip C120-001
Head size: 0.2 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
The image displays a technical drawing of an electrical component. On the right side, there is a circuit board with four connections. On the left are side views of the component, including dimensions.
Soldering tip C120-003
Head size: 3.0 x 0.7 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: PA120
The image shows a technical drawing of a hand tool with a curved end for manipulating electronic components on a green circuit board. Dimensions are provided.
Soldering tip C120-004
Head size: 0.7 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
The image displays technical drawings of a component on a circuit board. It includes various views of the component, along with dimensions in millimeters.
Soldering tip C120-005
Head size: 5.0 x 0.7 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: PA120
The image displays technical drawings of two tool tips, C120007 and C120008, as well as a green circuit board with four black components. Dimensions are provided.
Soldering tip C120-007 right
Head size: 3.5 x 0.7 mm / Soldering tip shape: straight , blade tip / suitable soldering iron: PA120
The image displays technical drawings of two tool tips, C120007 and C120008, as well as a green circuit board with four black components. Dimensions are provided.
Soldering tip C120-008 left
Head size: 3.5 x 0.7 mm / Soldering tip shape: straight , blade tip / suitable soldering iron: PA120
The image displays technical drawings of two components on a circuit board. Next to the board, dimensions and reference numbers of the components are depicted.
Soldering tip C120-009 right
Head size: 6.0 x 0.7 mm / Soldering tip shape: straight , blade tip / suitable soldering iron: PA120
The image displays technical drawings of two components on a circuit board. Next to the board, dimensions and reference numbers of the components are depicted.
Soldering tip C120-010 left
Head size: 6.0 x 0.7 mm / Soldering tip shape: straight , blade tip / suitable soldering iron: PA120
The image shows a technical drawing of soldering tips. Two pointed tools are depicted above a circuit board with various small components. Side views and dimensions are provided.
Soldering tip C120-011
Head size: 0.6 x 0.3 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: PA120
The image displays a technical drawing of a conical end piece with dimensions. There is a side view and a top view, both showing the end piece with a nozzle area and a thin cable.
Soldering tip C120-012
Head size: 0.7 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
The image displays a technical drawing of a soldering iron with a special tip. Additionally, details of a circuit board with electronic components are shown. Dimensions and labels are also visible.
Soldering tip
Head size: 0.5 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120
The image shows a technical illustration of a circuit board with several components. Individual parts are enlarged, and a tool is displayed in various views. Dimensions are provided.
Soldering tip
Head size: 0.3 mm / Soldering tip shape: tapered , bent / suitable soldering iron: PA120

13 Products
Product No.: JBC-C120-006
from 49.15 CHF
excl. 8.1% tax
to the product family
The image displays technical drawings of chip components. There is a green board with several components and various wire ends in different shapes and sizes. Dimensions are provided.
Preview: The image displays technical drawings of chip components. There is a green board with several components and various wire ends in different shapes and sizes. Dimensions are provided.
Preview: The image displays technical drawings of chip components with dimensions. It features two different soldering tips and a circuit board with multiple components.
Preview: The image displays technical drawings of a sensor. The top part shows two views of the connector components, while the bottom part details the sensor with dimensions given in millimeters.
Preview: The image displays technical drawings of a component. It includes front views and dimensions of a flat connector, as well as a PCB with two vertical contacts. Dimensions are provided.
Preview: The image displays a technical drawing of an electronic component. There is a green PCB with two vertical connectors and a length specification with various dimensions.
Preview: The image displays a technical drawing of a connector plug. It features two cylindrical parts on a green circuit board, alongside dimensions in millimeters and inches.
Preview: The image displays technical drawings of a module with two vertical connectors on a green circuit board. Dimensions are provided to allow precise orientation.
Preview: The image displays a technical drawing of a test adapter. It consists of a housing with two connectors aligned with a green circuit board. Dimensions are provided.
Preview: The image displays a technical drawing of a cartridge for QFP and PLCC packages. It includes various views and dimensions, such as a top view and a side view.
Preview: The image displays a technical drawing of a cartridge for QFP and PLCC packages. It includes dimensions and detailed views of a special holder and connection cable.
Preview: The image displays a technical drawing of a component. At the top, there is a flat, rectangular chip with two terminals and an assembly consisting of many small pins. At one end, a detailed view of a pin is shown.
Preview: The image shows a technical illustration of a component with two tubes and dimensions. It includes a front view and a cross-section, connected by a cable to a circuit board.
Preview: The image displays technical drawings of a device or tool. It shows various views and dimensions. The details include lengths and widths in millimeters.
Preview: The image displays a technical drawing of a component on a green circuit board. It features dimensions as well as two round metal protrusions with a central, square component.
JBC soldering tips for HT420
The image displays technical drawings of chip components. There is a green board with several components and various wire ends in different shapes and sizes. Dimensions are provided.
Desoldering tip pair C420-271
Head size: 1.5 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: HT420
The image displays technical drawings of chip components with dimensions. It features two different soldering tips and a circuit board with multiple components.
Desoldering tip pair C420-272
Head size: 2.6 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: HT420
The image displays technical drawings of a sensor. The top part shows two views of the connector components, while the bottom part details the sensor with dimensions given in millimeters.
Desoldering tip pair C420-273
Head size: 4.0 x 1.2 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: HT420
The image displays technical drawings of a component. It includes front views and dimensions of a flat connector, as well as a PCB with two vertical contacts. Dimensions are provided.
Desoldering tip pair C420-274
Head size: 6.0 x 1.2 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: HT420
The image displays a technical drawing of an electronic component. There is a green PCB with two vertical connectors and a length specification with various dimensions.
Desoldering tip pair C420-275
Head size: 8.8 x 1.2 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: HT420
The image displays a technical drawing of a connector plug. It features two cylindrical parts on a green circuit board, alongside dimensions in millimeters and inches.
Desoldering tip pair C420-276
Head size: 10.0 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: HT420
The image displays technical drawings of a module with two vertical connectors on a green circuit board. Dimensions are provided to allow precise orientation.
Desoldering tip pair C420-277
Head size: 15.0 x 1.2 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: HT420
The image displays a technical drawing of a test adapter. It consists of a housing with two connectors aligned with a green circuit board. Dimensions are provided.
Desoldering tip pair C420-278
Head size: 20-0 x 1.2 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: HT420
The image displays a technical drawing of a cartridge for QFP and PLCC packages. It includes various views and dimensions, such as a top view and a side view.
Desoldering tip pair C420-279
Head size: 8.0 mm / Soldering tip shape: special forme , angled / suitable soldering iron: HT420
The image displays a technical drawing of a cartridge for QFP and PLCC packages. It includes dimensions and detailed views of a special holder and connection cable.
Desoldering tip pair C420-280
Head size: 11.0 mm / Soldering tip shape: special forme , angled / suitable soldering iron: HT420
The image displays a technical drawing of a component. At the top, there is a flat, rectangular chip with two terminals and an assembly consisting of many small pins. At one end, a detailed view of a pin is shown.
Desoldering tip pair C420-283
Head size: 50.0 x 2.2 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: HT420
The image shows a technical illustration of a component with two tubes and dimensions. It includes a front view and a cross-section, connected by a cable to a circuit board.
Desoldering tip pair C420-285
Head size: 22.0 x 1.2 mm / Soldering tip shape: blade tip , straight / suitable soldering iron: HT420
The image displays technical drawings of a device or tool. It shows various views and dimensions. The details include lengths and widths in millimeters.
Special desoldering tip pair C420-286
Head size: 15.6 x 14.3 mm / Soldering tip shape: special forme , straight / suitable soldering iron: HT420
The image displays a technical drawing of a component on a green circuit board. It features dimensions as well as two round metal protrusions with a central, square component.
Special desoldering tip pair C420-287
Head size: 2.0 mm / Soldering tip shape: special forme , sloped / suitable soldering iron: HT420

14 Products
Product No.: JBC-C420-271
from 54.20 CHF
excl. 8.1% tax
to the product family
The image displays technical drawings of a conical object from various perspectives. It includes dimensions in mm and a label (C115-103) on the side.
Preview: The image shows a technical drawing of a sharp object, likely a nozzle or tip, with dimensions. Multiple views (side and top) are depicted, clarifying the details.
Preview: The image displays technical drawings of a conical object from various perspectives. It includes dimensions in mm and a label (C115-103) on the side.
Preview: The image shows a technical drawing of a pointed object with dimensions. There are three views: a side view, a top view, and a plan view with detailed measurements.
Preview: The image displays technical drawings of a tool attachment. It includes side and top views, with dimensions in millimeters and inches. The attachment has a pointed shape.
JBC soldering tips C115 for NT115/NP115
The image shows a technical drawing of a sharp object, likely a nozzle or tip, with dimensions. Multiple views (side and top) are depicted, clarifying the details.
Soldering tip C115-101
Head size: 0.1 mm / Soldering tip shape: tapered , bent / suitable soldering iron: NT115 / NP115
The image displays technical drawings of a conical object from various perspectives. It includes dimensions in mm and a label (C115-103) on the side.
Soldering tip C115-103
Head size: 0.3 mm / Soldering tip shape: tapered , straight / suitable soldering iron: NT115 / NP115
The image shows a technical drawing of a pointed object with dimensions. There are three views: a side view, a top view, and a plan view with detailed measurements.
Soldering tip C115-116
Head size: 0.2 x 0.1 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: NT115 / NP115
The image displays technical drawings of a tool attachment. It includes side and top views, with dimensions in millimeters and inches. The attachment has a pointed shape.
Soldering tip C115-213
Head size: 1.0 x 0.3 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: NP115 / NT115

4 Products
Product No.: JBC-C115-103
50.40 CHF
excl. 8.1% tax
to the product family
The image displays technical drawings of a narrow, curved tool with a pointed end. It includes measurements in mm and inches and describes the shape and dimensions of the tool.
Preview: The image displays technical drawings of a narrow, conical tool with two views. Dimensions are provided in millimeters, including a curved line.
Preview: The image displays technical drawings of a sharp tool with various views. Dimensions are provided: a length of 13 mm and a diameter of 0.8 mm.
Preview: The image displays technical drawings of a narrow, curved tool with a pointed end. It includes measurements in mm and inches and describes the shape and dimensions of the tool.
Preview: The image displays technical drawings of a nozzle-shaped attachment with various views. The attachment has a narrow opening and is marked with dimensions in millimeters.
Preview: The image displays technical drawings of a tool with a slim, curved attachment. Dimensions are provided, including length, width, and diameter.
Preview: The image displays technical drawings of a narrow, curved tool with a pointed end. Dimensions are provided that describe the shape and size of the tool.
Preview: The image displays technical drawings of a tool attachment. Various views are shown, including the tip and the cylindrical body with dimensions in millimeters.
Preview: The image displays technical drawings of a tool with a pointed end and a curved handle. Dimensions are noted. It has a cylindrical head and a precise cutting surface.
Preview: The image displays technical drawings of a straight, narrow tube with a rounded end and a longer hose. The dimensions are provided. It is a precise tool.
Preview: The image displays technical drawings of a special tool with a curved end. There are dimensions in millimeters and a detailed view of the tool's structure.
Preview: The image shows a technical drawing of a tool attachment. The top features the head of the attachment with a slanted edge. Below, a curved handle is depicted in a side view. Dimensions are provided.
Preview: The image displays a technical part, likely a tool. It features a curved tip and various views. Measurements are provided in millimeters.
Preview: The image displays technical drawings of a tool. It has a long, thin body with a pointed, flat tip. Dimensions are provided in millimeters.
Preview: The image shows a technical drawing of a sharp tool with an ergonomically shaped handle. It features dimensions and a curved shape that ensures precision.
Preview: The image shows a technical drawing of a pen-like object with a pointed tip. Dimensions are provided in millimeters, and the drawing includes front and side views.
Preview: The image displays technical drawings of a narrow, angled instrument with a cylindrical handle. Dimensions are given in millimeters. Multiple views are shown.
Preview: The image shows a technical drawing of a tool with a conical end and a long, narrow shape. Dimensions and a special identification number are provided.
JBC soldering tips C250 for AL250
The image displays technical drawings of a narrow, conical tool with two views. Dimensions are provided in millimeters, including a curved line.
Soldering tip C250-401
Head size: 0.6 mm / Soldering tip shape: tapered , bent / suitable soldering iron: AL250
The image displays technical drawings of a sharp tool with various views. Dimensions are provided: a length of 13 mm and a diameter of 0.8 mm.
Soldering tip C250-402
Head size: 0.8 mm / Soldering tip shape: tapered , bent / suitable soldering iron: AL250
The image displays technical drawings of a narrow, curved tool with a pointed end. It includes measurements in mm and inches and describes the shape and dimensions of the tool.
Soldering tip C250-403
Head size: 1.0 mm / Soldering tip shape: tapered , bent / suitable soldering iron: AL250
The image displays technical drawings of a nozzle-shaped attachment with various views. The attachment has a narrow opening and is marked with dimensions in millimeters.
Soldering tip C250-404
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
The image displays technical drawings of a tool with a slim, curved attachment. Dimensions are provided, including length, width, and diameter.
Soldering tip C250-405
Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
The image displays technical drawings of a narrow, curved tool with a pointed end. Dimensions are provided that describe the shape and size of the tool.
Soldering tip C250-406
Head size: 2.0 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
The image displays technical drawings of a tool attachment. Various views are shown, including the tip and the cylindrical body with dimensions in millimeters.
Soldering tip C250-407
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: AL250
The image displays technical drawings of a tool with a pointed end and a curved handle. Dimensions are noted. It has a cylindrical head and a precise cutting surface.
Soldering tip C250-408
Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: AL250
The image displays technical drawings of a straight, narrow tube with a rounded end and a longer hose. The dimensions are provided. It is a precise tool.
Soldering tip C250-409
Head size: 1.7 mm / Soldering tip shape: round , bent / suitable soldering iron: AL250
The image displays technical drawings of a special tool with a curved end. There are dimensions in millimeters and a detailed view of the tool's structure.
Soldering tip C250-410
Head size: 2.2 mm / Soldering tip shape: round , bent / suitable soldering iron: AL250
The image shows a technical drawing of a tool attachment. The top features the head of the attachment with a slanted edge. Below, a curved handle is depicted in a side view. Dimensions are provided.
Soldering tip C250-411
Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: AL250
The image displays a technical part, likely a tool. It features a curved tip and various views. Measurements are provided in millimeters.
Soldering tip C250-412
Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
The image displays technical drawings of a tool. It has a long, thin body with a pointed, flat tip. Dimensions are provided in millimeters.
Soldering tip C250-413
Head size: 2.2 x 1.0 mm / suitable soldering iron: AL250
The image shows a technical drawing of a sharp tool with an ergonomically shaped handle. It features dimensions and a curved shape that ensures precision.
Soldering tip C250-414
Head size: 2.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: AL250
The image shows a technical drawing of a pen-like object with a pointed tip. Dimensions are provided in millimeters, and the drawing includes front and side views.
Soldering tip C250-415
Head size: 3.8 mm / Soldering tip shape: round , sloped / suitable soldering iron: AL250
The image displays technical drawings of a narrow, angled instrument with a cylindrical handle. Dimensions are given in millimeters. Multiple views are shown.
Soldering tip C250-418
Head size: 3.2 x 1.5 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
The image shows a technical drawing of a tool with a conical end and a long, narrow shape. Dimensions and a special identification number are provided.
Soldering tip C250-420
Head size: 0.4 mm / Soldering tip shape: pointed , bent / suitable soldering iron: AL250

17 Products
Product No.: JBC-C250-403
46.60 CHF
excl. 8.1% tax
to the product family
The image displays a technical drawing of a lens. It consists of a cylindrical body with a flat, rectangular end. The dimensions are provided.
Preview: The image displays technical drawings of a slender, pointed object resembling a pen. It features round and conical shapes, with dimensions in mm and inches.
Preview: The image shows a technical drawing of a tip attachment. It has a conical shape with a rounded tip. The dimensions are given in millimeters, and it is equipped with a handle.
Preview: The image shows technical drawings of a tool or a pen with various views: top view, side view, and detail. Dimensions are provided.
Preview: The image displays a technical drawing of a pen. It has a rounded tip and a cylindrical shape. Dimensions are provided: length 10.3 mm, diameter 7.5 mm.
Preview: The image displays a technical drawing of a small cylindrical object with a round head and a long, thin pin. Dimensions are provided. The object has a diameter of 4.5 mm.
Preview: The image shows technical drawings of a cylindrical object with a chamfered end. Dimensions are provided, and a top view is also depicted.
Preview: The image displays a technical drawing of a specialized device. There are multiple views: a front view, a side view, and a top view. Dimensions are provided.
Preview: The image shows a technical drawing of a device accessory with various views. It has an oval, curved shape, a thin, long neck, and specific dimensions in millimeters.
Preview: The image displays a technical drawing of an object, likely a pen or tool, with a pointed end. Dimensions in millimeters are provided, describing the length and width.
Preview: The image displays technical drawings of a cylindrical object with a rounded end. There are various views and measurements, including diameter and length.
Preview: The image shows a technical drawing of a bent pipe with a diameter of 4.2 mm. There are various views, including a detailed view. Dimensions are provided.
Preview: The image displays technical drawings of a small, U-shaped tool with various views. Dimensions are provided, including length, width, and radius for precise measurements.
Preview: The image displays a technical drawing of a pen. Various views are shown: the tip, the side, and a detailed view. Dimensions are provided in mm and inches.
Preview: The image displays a technical drawing of a pen. The top shows the front and side of the pen, while the bottom shows the pen in a side view. Dimensions are provided.
Preview: The image displays a technical drawing of an object. It features a conical tip and a cylindrical handle. Dimensions are visible, with the length being approximately 13 mm.
Preview: The image displays a technical drawing of an instrument. It features a tapered shape with a flat end. The dimensions are provided, and the body is cylindrical with a gray surface.
Preview: The image shows a technical drawing of a cylindrical object with a rounded tip. There are measurements for diameter and length. The surface appears smooth and plastic.
Preview: The image displays technical drawings of an object with an angled end. It includes detailed dimensions and various views, including a side and a top view.
Preview: The image displays a technical drawing of a pen. It features a conical tip and a cylindrical body. Dimensions and product code are provided to clarify the size and shape.
Preview: The image displays technical drawings of a geometric object from multiple perspectives. It includes dimensions in mm and shows a conical, closed endpoint with a flat edge.
Preview: The image displays technical drawings of an accessory part with a conical end and a slender neck. Dimensions are provided in millimeters and inches. The part has a flat, wide tip.
Preview: The image shows a technical drawing of a tool. It has a narrow, flat head with a sharp edge and a long, cylindrical handle. Dimensions are given in mm.
Preview: The image shows a technical drawing of a conical tool with a chromed finish. Dimensions and a label are provided, describing its use with plastic rivets.
Preview: The image displays a technical drawing of a tool attachment with a curved end. The attachment has a chrome finish and dimensions are provided. It is designed for plastic rivets.
Preview: The image displays a technical drawing of a component. It features a flat, rectangular structure with dimensions. A long pin extends from the base, on which a small cylindrical part is seated.
Preview: The image shows technical drawings of a precise device. It includes various views and dimensions that clarify the details of the shape and functions.
Preview: The image displays a technical drawing of an object from various perspectives. Dimensions in millimeters are provided, including length, width, and radius. The object has a conical shape with rounded edges.
Preview: The image displays technical drawings of a device. It consists of a cylindrical body with a conical end. Dimensions are provided in millimeters, and a base plate is depicted.
Preview: The image displays technical drawings of a pen with a broad tip and the corresponding dimensions. There are various views that illustrate the details of the tip and the casing.
Preview: The image displays a technical drawing of a cylindrical tool with a chrome-plated surface. There are dimensions and a product number provided that describe the dimensions.
Preview: The image displays a technical drawing of a medical instrument featuring a short, round handle and a fine, pointed opening. Dimensions are provided in mm.
Preview: The image depicts a technical illustration of a curved pipe. It has a diameter of 18 mm and an opening of 3.5 x 1.5 mm at one end.
Preview: The image displays technical drawings of a pen. Various views are presented: front view, side view, and a detailed view of the tip. Dimensions are provided.
Preview: The image displays a technical drawing of a tool. It consists of a cylindrical body with a conical tip and is shown in profile as well as from above. Dimensions are provided.
Preview: The image displays a technical illustration of a device with a cylindrical body, a tapered tip, and a blue cap. Dimensions and details are graphically represented.
Preview: The image displays a technical drawing of a component with various views: from the side, top, and bottom. It includes dimensions in millimeters and features a special shape with rounded edges.
Preview: The image shows a technical component in three views. It has a cylindrical shape with a chamfered tip, and dimensions are provided in millimeters.
Preview: The image displays technical drawings of an object, likely a tip or an attachment. The dimensions are provided in millimeters, and the perspectives reveal the shape and details of the object.
Preview: The image displays technical drawings of a mechanical part with two cylindrical rods, a curved surface, and dimensions in millimeters and inches.
Preview: The image shows a technical drawing of a part with multiple cylinders and a base plate. Dimensions are given in millimeters. There are sectional views and details about shape and size.
Preview: The image displays technical drawings of a cylindrical object from various perspectives. It includes dimensions in millimeters and a marked section that clarifies the shape.
Preview: The image displays technical drawings of a cylindrical object with a rectangular head and a narrow connection, showing measurements and details.
Preview: The image displays a technical drawing of a cylindrical object with various diameters. It includes dimensions in millimeters, a cross-sectional view, and the product number. The surface is smooth and metallic.
Preview: The image displays a technical drawing of a tool with various views. It has a round, cylindrical body with a flat, rectangular end. Dimensions are provided.
Preview: The image displays technical drawings of a specific device, including the front view, side view, and dimensions. The tip has a special shape and is dimensioned in millimeters.
Preview: The image displays technical drawings of various components of a device, including specific measurements in millimeters and inches. Multiple views of the same parts are shown.
Preview: The image displays technical drawings of a pen, including various views and dimensions of the tip, the casing, and the cap. Dimensions are provided in mm and inches.
Preview: The image displays technical drawings of an electrical component with various views. Dimensions and details of the connections and the casing shape are shown.
Preview: The image displays technical drawings of a tool, likely a ratchet head. Multiple perspectives and measurements are visible, depicting the shape and structure of the tool.
Preview: The image displays technical drawings of a cylindrical object with dimensions and various views. Both side views and a top view are visible, depicting a precise design.
Preview: The image displays technical drawings of an object with various views and dimensions. There is a detailed view with various lengths and shapes, as well as a side top view.
Preview: The image shows a technical drawing of a cylindrical object with a rounded tip. Dimensions in millimeters and a detailed view of the object are displayed.
Preview: The image displays technical drawings of components: a rectangle with dimensions, a green magnet, and a PCB (printed circuit board) with components. Below it, a cable with a connector.
Preview: The image displays a technical drawing of an object that has a narrow, pointed end on one side. Dimensions for length and diameter are provided.
Preview: The image displays a technical drawing of a lens. It consists of a cylindrical body with a flat, rectangular end. The dimensions are provided.
Preview: The image shows a technical drawing of a square tool with a cylindrical handle. Dimensions in millimeters are provided, clarifying the dimensions of the tool.
JBC Soldering tips for T470
The image displays technical drawings of a slender, pointed object resembling a pen. It features round and conical shapes, with dimensions in mm and inches.
Soldering tip C470-001
The image shows a technical drawing of a tip attachment. It has a conical shape with a rounded tip. The dimensions are given in millimeters, and it is equipped with a handle.
Soldering tip C470-002
The image shows technical drawings of a tool or a pen with various views: top view, side view, and detail. Dimensions are provided.
Soldering tip C470-003
The image displays a technical drawing of a pen. It has a rounded tip and a cylindrical shape. Dimensions are provided: length 10.3 mm, diameter 7.5 mm.
Soldering tip C470-004
The image displays a technical drawing of a small cylindrical object with a round head and a long, thin pin. Dimensions are provided. The object has a diameter of 4.5 mm.
Soldering tip C470-005
The image shows technical drawings of a cylindrical object with a chamfered end. Dimensions are provided, and a top view is also depicted.
Soldering tip C470-006
The image displays a technical drawing of a specialized device. There are multiple views: a front view, a side view, and a top view. Dimensions are provided.
Soldering tip C470-007
The image shows a technical drawing of a device accessory with various views. It has an oval, curved shape, a thin, long neck, and specific dimensions in millimeters.
Soldering tip C470-008
The image displays a technical drawing of an object, likely a pen or tool, with a pointed end. Dimensions in millimeters are provided, describing the length and width.
Soldering tip C470-009
The image displays technical drawings of a cylindrical object with a rounded end. There are various views and measurements, including diameter and length.
Soldering tip C470-010
The image shows a technical drawing of a bent pipe with a diameter of 4.2 mm. There are various views, including a detailed view. Dimensions are provided.
Soldering tip C470-011
The image displays technical drawings of a small, U-shaped tool with various views. Dimensions are provided, including length, width, and radius for precise measurements.
Soldering tip C470-012
The image displays a technical drawing of a pen. Various views are shown: the tip, the side, and a detailed view. Dimensions are provided in mm and inches.
Soldering tip C470-013
The image displays a technical drawing of a pen. The top shows the front and side of the pen, while the bottom shows the pen in a side view. Dimensions are provided.
Soldering tip C470-014
The image displays a technical drawing of an object. It features a conical tip and a cylindrical handle. Dimensions are visible, with the length being approximately 13 mm.
Soldering tip C470-015
The image displays a technical drawing of an instrument. It features a tapered shape with a flat end. The dimensions are provided, and the body is cylindrical with a gray surface.
Soldering tip C470-016
The image shows a technical drawing of a cylindrical object with a rounded tip. There are measurements for diameter and length. The surface appears smooth and plastic.
Soldering tip C470-017
The image displays technical drawings of an object with an angled end. It includes detailed dimensions and various views, including a side and a top view.
Soldering tip C470-018
The image displays a technical drawing of a pen. It features a conical tip and a cylindrical body. Dimensions and product code are provided to clarify the size and shape.
Soldering tip C470-019
The image displays a technical drawing of a pen. It features a conical tip and a cylindrical body. Dimensions and product code are provided to clarify the size and shape.
Soldering tip C470-020
The image displays technical drawings of a geometric object from multiple perspectives. It includes dimensions in mm and shows a conical, closed endpoint with a flat edge.
Soldering tip C470-021
The image displays technical drawings of an accessory part with a conical end and a slender neck. Dimensions are provided in millimeters and inches. The part has a flat, wide tip.
Soldering tip C470-022
The image shows a technical drawing of a tool. It has a narrow, flat head with a sharp edge and a long, cylindrical handle. Dimensions are given in mm.
Soldering tip C470-023
The image shows a technical drawing of a conical tool with a chromed finish. Dimensions and a label are provided, describing its use with plastic rivets.
Soldering tip C470-025
The image displays a technical drawing of a tool attachment with a curved end. The attachment has a chrome finish and dimensions are provided. It is designed for plastic rivets.
Soldering tip C470-026
The image displays a technical drawing of a component. It features a flat, rectangular structure with dimensions. A long pin extends from the base, on which a small cylindrical part is seated.
Soldering tip C470-027
The image shows technical drawings of a precise device. It includes various views and dimensions that clarify the details of the shape and functions.
Soldering tip C470-028
The image displays a technical drawing of an object from various perspectives. Dimensions in millimeters are provided, including length, width, and radius. The object has a conical shape with rounded edges.
Soldering tip C470-029
The image displays technical drawings of a device. It consists of a cylindrical body with a conical end. Dimensions are provided in millimeters, and a base plate is depicted.
Soldering tip C470-030
The image displays technical drawings of a pen with a broad tip and the corresponding dimensions. There are various views that illustrate the details of the tip and the casing.
Soldering tip C470-031
The image displays a technical drawing of a cylindrical tool with a chrome-plated surface. There are dimensions and a product number provided that describe the dimensions.
Soldering tip C470-032
The image displays a technical drawing of a medical instrument featuring a short, round handle and a fine, pointed opening. Dimensions are provided in mm.
Soldering tip C470-033
The image depicts a technical illustration of a curved pipe. It has a diameter of 18 mm and an opening of 3.5 x 1.5 mm at one end.
Soldering tip C470-034
The image displays technical drawings of a pen. Various views are presented: front view, side view, and a detailed view of the tip. Dimensions are provided.
Soldering tip C470-035
The image displays a technical drawing of a tool. It consists of a cylindrical body with a conical tip and is shown in profile as well as from above. Dimensions are provided.
Soldering tip C470-036
The image displays a technical illustration of a device with a cylindrical body, a tapered tip, and a blue cap. Dimensions and details are graphically represented.
Soldering tip C470-037
The image displays a technical drawing of a component with various views: from the side, top, and bottom. It includes dimensions in millimeters and features a special shape with rounded edges.
Soldering tip C470-038
The image shows a technical component in three views. It has a cylindrical shape with a chamfered tip, and dimensions are provided in millimeters.
Soldering tip C470-039
The image displays technical drawings of an object, likely a tip or an attachment. The dimensions are provided in millimeters, and the perspectives reveal the shape and details of the object.
Soldering tip C470-040
The image displays technical drawings of a mechanical part with two cylindrical rods, a curved surface, and dimensions in millimeters and inches.
Soldering tip C470-041
The image shows a technical drawing of a part with multiple cylinders and a base plate. Dimensions are given in millimeters. There are sectional views and details about shape and size.
Soldering tip C470-042
The image displays technical drawings of a cylindrical object from various perspectives. It includes dimensions in millimeters and a marked section that clarifies the shape.
Soldering tip C470-043
The image displays technical drawings of a cylindrical object with a rectangular head and a narrow connection, showing measurements and details.
Soldering tip C470-044
The image displays a technical drawing of a cylindrical object with various diameters. It includes dimensions in millimeters, a cross-sectional view, and the product number. The surface is smooth and metallic.
Special soldering tip C470-051
The image displays a technical drawing of a tool with various views. It has a round, cylindrical body with a flat, rectangular end. Dimensions are provided.
Soldering tip C470-046
The image displays technical drawings of a specific device, including the front view, side view, and dimensions. The tip has a special shape and is dimensioned in millimeters.
Soldering tip C470-047
The image displays technical drawings of various components of a device, including specific measurements in millimeters and inches. Multiple views of the same parts are shown.
Soldering tip C470-048
The image displays technical drawings of a pen, including various views and dimensions of the tip, the casing, and the cap. Dimensions are provided in mm and inches.
Soldering tip C470-049
The image displays technical drawings of an electrical component with various views. Dimensions and details of the connections and the casing shape are shown.
Soldering tip C470-050
The image displays technical drawings of a tool, likely a ratchet head. Multiple perspectives and measurements are visible, depicting the shape and structure of the tool.
Special soldering tip C470-051
The image displays technical drawings of a cylindrical object with dimensions and various views. Both side views and a top view are visible, depicting a precise design.
Soldering tip C470-052
The image displays technical drawings of an object with various views and dimensions. There is a detailed view with various lengths and shapes, as well as a side top view.
Soldering tip C470-055
The image shows a technical drawing of a cylindrical object with a rounded tip. Dimensions in millimeters and a detailed view of the object are displayed.
Soldering tip C470-056
The image displays technical drawings of components: a rectangle with dimensions, a green magnet, and a PCB (printed circuit board) with components. Below it, a cable with a connector.
Soldering tip C470-057
The image displays a technical drawing of an object that has a narrow, pointed end on one side. Dimensions for length and diameter are provided.
Soldering tip C470-058
The image displays a technical drawing of a lens. It consists of a cylindrical body with a flat, rectangular end. The dimensions are provided.
Soldering tip C470-059
The image shows a technical drawing of a square tool with a cylindrical handle. Dimensions in millimeters are provided, clarifying the dimensions of the tool.
Solder bath tip C470-SP01

57 Products
Product No.: JBC-C470-059
from 54.20 CHF
excl. 8.1% tax
to the product family
1 to 7 (from a total of 7)