PGT Personnel test station

PGT personnel test stations are used for standard-compliant testing of personnel grounding in electrostatically protected areas (EPA). They support compliance with the requirements of IEC 61340-5-1 and can be integrated into existing access control systems. The system is supplemented by compatible accessories such as touchscreen monitors, data terminal controllers and test station mats, allowing for application-specific configuration.

 

PGT 120

PGT 120.COM

Power supply

battrey or power supply unit

only power supply unit

Data interface

none

RS232 (ASCII data transfer to PC/terminal)

Door opener time

not adjustable

adjustable: 1 s or 3 s

Additional function

no data transfer

further processing of measurement data (ASCII) possible

 

The image shows a white tester with a yellow top. There are various symbols and buttons on the surface. Two metal plates are designed to be pressed to conduct a test.
Personnel grounding tester PGT 120
ESD / Width : 150 mm / Height : 65 mm / Length : 200 mm / Voltage: 230 V
PGT 120 personal grounding tester for
access control, including power supply unit and
footwear electrode

Product No.: 7100.PGT120
748.05 CHF
excl. 8.1% tax
Show product
Image
Preview: The image shows a tall, slender post in bright yellow with a round black base. At the top, it has an opening, which might be intended for a barrier tape.
Preview: Image
Preview: The image shows a black shelf with a back panel. It has a rectangular base and an opening in the board. The construction is sturdy and practical for wall mounting.
Preview: Image
Pedestal stand for PGT 120 with support
Pedestal stand
Floor mat with yellow bevelled edge
Holder for PGT 120, attachable
Accessory kit for PGT 120

4 Products
Product No.: 7100.PGT120.TERM.SET
from 89.75 CHF
excl. 8.1% tax
to the product family
The image shows a yellow testing device with two large metal plates in the center. It has buttons and symbols, including
PGT®120.COM with RS232 interface
PGT 120 personnel grounding tester for
access control, ++special version++
incl. power supply unit and footwear electrode
Footwear electrode
++ Special version with an RS232 interface to connect e.g. to time recording terminals, test results are provided via RS232 interface ++

Product No.: 7100.PGT120.COM
1,056.65 CHF
excl. 8.1% tax
Show product
The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image displays a rectangular frame with a black, textured inner field and a yellow border. The frame features a central, open field.
Preview: The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image shows a long, rectangular red block with a slanted edge. Next to it are several green screws. The block could be used for construction or sports.
Accessories for PGT 120
Mat
Wall bracket for PGT 100 / PGT 120
Divider for footwear electrode

3 Products
Product No.: 7100.PGT120.WK
from 55.75 CHF
excl. 8.1% tax
to the product family
The image displays a black, rectangular device with a yellow front. It features a rotary knob in the center and several status indicators in the form of symbols and text, displaying calibration values.
Preview: The image displays a calibrated device with a black casing. On the front, there is a yellow label featuring various scale markings and a rotary knob in the center.
Preview: The image displays a black, rectangular device with a yellow front. It features a rotary knob in the center and several status indicators in the form of symbols and text, displaying calibration values.
Calibration unit for PGT 120
Calibration unit for PGT 120 with 8 Dip switches
Calibration unit for PGT 120 with 12 dip switches

2 Products
Product No.: 7100.PGT120.CU.12
from 126.30 CHF
excl. 8.1% tax
to the product family
The image shows a standing counter with an orange sign
Preview: The image shows a standing counter with an orange sign
Preview: The image displays a rectangular frame with a yellow border and a dark interior. In the center, there are two small cutouts that resemble the shape of a cup or a container.
PGTest Station for PGT® 120.COM
PGTest Station for PGT® 120 / PGT® 120.COM
Test station mat for PG test station

2 Products
Product No.: 7100.PGT120.TEST.V01
from 308.60 CHF
excl. 8.1% tax
to the product family
The image shows a black USB hub with an attached USB cable. It has two USB ports on the front and a simple, rectangular design.
Preview: The image shows an electrical testing device with two rectangular buttons, a display on the right side, and symbols for various functions. The color is primarily yellow and black.
Preview: The image shows a USB relay. It has a rectangular, white shape with two buttons and two small LEDs. A transparent USB cable connects it to a computer.
Preview: The image shows a round knob with a glass surface and grooved design. The bottom is black, and a USB cable leads from it. The knob is likely used for volume control.
Preview: The image shows a black USB hub with an attached USB cable. It has two USB ports on the front and a simple, rectangular design.
Preview: The image shows a metallic wedge that is flat on one side and rises to a sharp angle at the top. It has a smooth surface and an opening at the base.
Accessories for PGT 120-COM Data Terminal DT2/DT3/TC18
Holder extension for Data Terminal 3
Door opener switching relay for data terminals DT2, DT2.1, TC18
Signal light with acoustic signal
4-Port USB Hub
Wall bracket for Data Terminal Controller DT3

5 Products
Product No.: 7100.PGT120.TEST.16
from 10.80 CHF
excl. 8.1% tax
to the product family
The image shows a black label printer mounted on a stand. It has a roll of labeled adhesive labels, which are partially visible and protruding horizontally.
Label printer for PGT 120-COM Data Terminal
Printer for Data Terminal
Labels 36 x 67 mm

2 Products
Product No.: 7100.PGT120.COM.D.3
Price on request
to the product family
The image shows a rectangular device with a yellow frame and a screen. The display shows information such as temperature, humidity, and a date/time stamp. An RFID symbol is visible.
Data Terminal Controller DT3
Data terminal controller DT3 incl. display, RFID
Reader and relay contact


Interfaces:
x USB
1 x D-SUB9 für PGT120.COM
1 x RJ45 - LAN
1 x RJ12 - Relais
1 x Micro USB - RFID Reader
1 x Micro USB - POWER 5VDC

Product No.: 7100.PGT120.COM.DT3
Price on request
Show product
The image shows a touchscreen monitor displaying instructions for conducting a test. On the screen, outlines of feet and a hand are depicted.
Touch Screen Monitor TC18 incl. DATA Terminal
Touch screen monitor TC18 incl. DATA terminal for
PGT120.com, 10-inch capacitive, with integrated
MiniPC (DATA Terminal), LAN connection RJ45,.
4 x USB2. 0, 1 x COM RS232
Scope of delivery:
1 x touch-PC
1 x EU connection cable
1 x power supply unit
4 x fixing brackets
1 x quick start guide

Product No.: 7100.PGT120.COM.TC18
Price on request
Show product
The image shows five white, rectangular plastic cards stacked on top of each other. Each card has numbers and letters embossed on one side. The background is gray.
Preview: The image shows an RFID reader with a black casing and a yellow marking. A cable with a USB connection leads away from it. The reader is used for wireless data transmission.
Preview: The image shows five white, rectangular plastic cards stacked on top of each other. Each card has numbers and letters embossed on one side. The background is gray.
Card reader and ID card
External card reader (USB)
Transponder ID card

2 Products
Product No.: 7100.PGT.XK.ID.V3
Price on request
to the product family
The diagram displays a system layout with multiple gates (1, 2, 32) connected via Ethernet. There is a data collector, user, and measurement data management.
Software for "Data Collection", CD-ROM
Software for "Data collection" on CD-ROM

Product No.: 7100.PGT120.COM.SOFT
Price on request
Show product
The image shows a white shoe with a transponder pocket, a cable, and a shoe electrode. This is used for separate measurement of left and right shoes.
Preview: The image shows a white shoe with a transponder pocket, a cable, and a shoe electrode. This is used for separate measurement of left and right shoes.
Preview: The image shows a simple, flat, rectangular card in white. It has no visible patterns or text and resembles a credit card. The surface is smooth.
Accessories for PGT2000 Personal test station
ESD-protective
ID module (transponder)
ID card (transponder card)

2 Products
Product No.: 7100.PGT2000.ID.V2
from 7.75 CHF
excl. 8.1% tax
to the product family
1 to 13 (from a total of 13)