Screwdrivers

These screwdrivers offer the ideal solution for safe manual screwdriving in electronics production. The range includes ESD-suitable screwdrivers with conductive handles for safe use in ESD areas, VDE-insulated screwdrivers for live working and conventional models for general assembly work.

The range is complemented by pin wrenches and the individually adjustable reversible blades. All screwdriving tools impress with their ergonomic design, high durability and first-class quality - for energy-saving work and better health in everyday working life.

ESD-sensitive components must be consistently protected against uncontrolled electrostatic discharges. Even small potential differences can lead to serious damage to electronic components.

To prevent this, an ESD-safe working environment is of central importance. Dissipative tools make an important contribution. These enable a controlled charge exchange, with secure earthing, and reliably prevent ESD damage.

Screw profiles

A screw connection is the most commonly used connection technology. The right screw profile is required to prevent damage to the screw and to enable maximum force transmission. You will find the following profiles in the DPV range:

Slot

As one of the very first screw profiles, a simple slot serves as a receptacle for the tool tip. As the blade tends to slip out of the screw, it is not suitable for machine screwing.

Phillips (cross tip)

The cross recess profile is formed from two slotted profiles crossed at right angles. The profile has good screw properties - the force is applied at four edges and makes it easier to screw in.

Pozidriv

The Pozidriv profile is a further development of the Phillips profile. Two crosses offset by 45 degrees form this profile. However, one of the crosses is narrower and also less deep.

Torx

The Torx profile is a star-shaped profile with six rounded tips. A higher torque can be transmitted with this profile. Slipping of the tool is not possible.

Torx Plus

Torx Plus profile is similar to the star-shaped profile of Torx, but with flattened tips. In comparison, even higher torques can be achieved.

Torx Tamper Resistant

The Torx tamper-resistant profile is a safety profile and differs only by a hole in the tool, which prevents screwing by unauthorized persons

Hexagonal

The hexagonal profile consists of six lateral surfaces that are at an angle of 120 degrees to each other. Several versions of the hexagonal profile are available. Socket wrench - the tool tip is placed around the screw. Hexagon ball head - the ball head enables screwing at a 25 degree angle.

Different handles for screwing - See through now

Dissipative ESD handles - screwdrivers

Suitable for working on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage.

Dissipative ESD handles - precision screwdrivers

Ideal for precision work on electrostatically sensitive components. The conductive handles dissipate electrostatic charges in a controlled manner and - when correctly earthed - protect components from ESD damage. The slim handles with a twist cap enable fast and precise work.

Voltage-insulated VDE handles - screwdrivers[

Ideal for live working. The electrically insulated screwdriver handles are ideal for all work on live parts.

Voltage-insulated VDE handles - precision screwdrivers

Suitable for live working. The electrically insulated screwdriver handles are ideal for all work on live parts. Slim handles with a twist cap enable fast and precise work.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions.

Standard handles - screwdrivers

Suitable for all screwdriving work under non-specific conditions. Slim handles with a twist cap enable fast and precise work.

Our Brands

CK Piergiacomi Wera Wiha
The image shows a red, rectangular tool for magnetization and demagnetization. It has two areas with symbols, instructions in German, and the
Magnetizer
Magnetizer
Size: 50 x 50 x 29 mm / WxHxD


for magnetizing and demagnetizing of blades and similar tools made of steel

Product No.: 400.10
14.20 CHF
excl. 8.1% tax
Show product
The image shows a slim, black screwdriver with a ceramic head and a round handle. The head is narrow and has a transparent protective cap.
XONIC 4845-ESD Ceramic trimmer slotted
ESD-protective
Ceramic trimmer slotted XONIC 4845-ESD 0.9x15
ESD / Screwdriver type: Slotted / Tip: SL0,9 / Shank length: 15 mm
Ceramic trimmer slotted 4845-ESD 1.3x15
ESD / Screwdriver type: Slotted / Tip: SL1,3 / Shank length: 15 mm
Ceramic trimmer slotted XONIC 4845-ESD 1.8x15
ESD / Screwdriver type: Slotted / Tip: SL1,8 / Shank length: 15 mm
Ceramic trimmer slotted XONIC 4845-ESD 2.6x15
ESD / Screwdriver type: Slotted / Tip: SL2,6 / Shank length: 15 mm

4 Products
Product No.: 4845-ESD1.8x15
from 23.20 CHF
excl. 8.1% tax
to the product family
The image shows a silver wrench with a length of about 20 cm. At one end, there is a square head, which bears the brand
SYSTEM 6 adapter blade 1/4"
Screwdriver type: Hexagonal / inner square / Tip: 635
Adapter blade for wrench socket
with 1/4" inner square
Length 150 mm ++ Wiha SYSTEM 6++

Product No.: 7803
17.35 CHF
excl. 8.1% tax
Show product
The image shows a screwdriver with a yellow handle and black rubber at the top. The blade is thin and made of metal, ideal for precise screwing tasks.
TORX® screwdriver 277P ESD PicoFinish®
ESD-protective
TORX ESD screwdriver TX 01 x 40
ESD / Screwdriver type: Torx / Tip: TX01 / Shank length: 40 mm
TORX ESD screwdriver TX 05 x 40
ESD / Screwdriver type: Torx / Tip: TX05 / Shank length: 40 mm
TORX ESD screwdriver TX 06 x 40
ESD / Screwdriver type: Torx / Tip: TX06 / Shank length: 40 mm
TORX ESD screwdriver TX 08 x 40
ESD / Screwdriver type: Torx / Tip: TX08 / Shank length: 40 mm
TORX ESD screwdriver TX 10 x 40
ESD / Screwdriver type: Torx / Tip: TX10 / Shank length: 50 mm
TORX ESD screwdriver TX 15 x 60
ESD / Screwdriver type: Torx / Tip: TX15 / Shank length: 60 mm

6 Products
Product No.: 277P.TX08x40
from 10.55 CHF
excl. 8.1% tax
to the product family
The image shows a yellow screwdriver with a slightly curved, narrow tip. The handle has a non-slip coating and bears the logo
Lifter ESD 3.5 x 50
ESD / Screwdriver type: Remover / Tip: 3.5/1 / Shank length: 50 mm
ESD lifter 3.5 x 50 mm, for removing
tight components from printed circuit boards
++Wiha screwdriver PicoFinish ESD++

Product No.: 278P.1001
13.95 CHF
excl. 8.1% tax
Show product
The image shows a Phillips screwdriver with a red-yellow handle. The handle is ergonomically shaped and features an embedded brand name. The tip is black and narrow.
Phillips screwdriver 321N VDE SoftFinish® electric
Phillips screwdriver 321N VDE PH 0 x 60
Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank length: 60 mm
Phillips screwdriver 321N VDE PH 1 x 80
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 80 mm
Phillips screwdriver 321N VDE PH 2 x 100
Screwdriver type: Crosstip (Philips) / Tip: PH2 / Shank length: 100 mm
Phillips screwdriver 321N VDE PH 3 x 150
Screwdriver type: Crosstip (Philips) / Tip: PH3 / Shank length: 150 mm
Phillips screwdriver 321N VDE PH 4 x 200
Screwdriver type: Crosstip (Philips) / Tip: PH4 / Shank length: 200 mm

5 Products
Product No.: 321N.PH1x80
from 9.90 CHF
excl. 8.1% tax
to the product family
The image shows a silver, cylindrical object with groove-shaped indentations along its length. It appears smooth and shiny, like a part of a device.
SYSTEM 4 TORX® reversible blade
SYSTEM 4 TORX® reversible blade T1.T2
Screwdriver type: Torx / Tip: T1/T2 / Shank-Ø: 4.0 mm
SYSTEM 4 TORX® reversible blade T3.T4
Screwdriver type: Torx / Tip: T3/T4 / Shank-Ø: 4.0 mm
SYSTEM 4 TORX® reversible blade T5.T6
Screwdriver type: Torx / Tip: T5/T6 / Shank-Ø: 4.0 mm
SYSTEM 4 TORX® reversible blade T6.T8
Screwdriver type: Torx / Tip: T6/T8 / Shank-Ø: 4.0 mm
SYSTEM 4 TORX® reversible blade T7.T9
Screwdriver type: Torx / Tip: T7/T9 / Shank-Ø: 4.0 mm
SYSTEM 4 TORX® reversible blade T10.T15
Screwdriver type: Torx / Tip: T10/T15 / Shank-Ø: 4.0 mm
SYSTEM 4 TORX® reversible blade T15.T20
Screwdriver type: Torx / Tip: T15/T20 / Shank-Ø: 4.0 mm

7 Products
Product No.: 269.T10/15
11.80 CHF
excl. 8.1% tax
to the product family
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Phillips screwdriver 311 SoftFinish®
Phillips screwdriver 311 PH 0 x 60
Screwdriver type: Crosstip (Philips) / Tip: PH0 / Shank length: 60 mm
Phillips screwdriver 311 PH 1 x 100
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 100 mm
Phillips screwdriver 311 PH 1 x 80
Screwdriver type: Crosstip (Philips) / Tip: PH1 / Shank length: 80 mm
Phillips screwdriver 311 PH 2 x 100
Screwdriver type: Crosstip (Philips) / Tip: PH2 / Shank length: 100 mm
Phillips screwdriver 311 PH 2 x 150
Screwdriver type: Crosstip (Philips) / Tip: PH2 / Shank length: 150 mm
Phillips screwdriver 311 PH 3 x 150
Screwdriver type: Crosstip (Philips) / Tip: PH3 / Shank length: 150 mm

6 Products
Product No.: 311.PH2x100
from 7.40 CHF
excl. 8.1% tax
to the product family
The image shows a screwdriver with a metallic shaft and an ergonomic handle. The handle is black with red accents and the logo
Pozidriv screwdriver 313 SoftFinish®
Pozidriv screwdriver 313 PZ 0 x 60
Screwdriver type: Pozidriv / Tip: PZ0 / Shank length: 60 mm
Pozidriv screwdriver 313 PZ 1 x 80
Screwdriver type: Pozidriv / Tip: PZ1 / Shank length: 80 mm
Pozidriv screwdriver 313 PZ 2 x 100
Screwdriver type: Pozidriv / Tip: PZ2 / Shank length: 100 mm
Pozidriv screwdriver 313 PZ 3 x 150
Screwdriver type: Pozidriv / Tip: PZ3 / Shank length: 150 mm

4 Products
Product No.: 313.PZ1x80
from 8.70 CHF
excl. 8.1% tax
to the product family
The image shows a red screwdriver with a yellow handle. The handle has the inscription
TORX® screwdriver VDE SoftFinish® electric SlimFix
TORX screwdriver 325 VDE TX 10 x 100 SlimFix
Screwdriver type: Torx / Tip: TX10 / Shank length: 100 mm
TORX screwdriver 325 VDE TX 15 x 100 SlimFix
Screwdriver type: Torx / Tip: TX15 / Shank length: 100 mm
TORX screwdriver 325 VDE TX 20 x 100 SlimFix
Screwdriver type: Torx / Tip: TX20 / Shank length: 100 mm
TORX screwdriver 325 VDE TX 25x 125 SlimFix
Screwdriver type: Torx / Tip: TX25 / Shank length: 100 mm
TORX screwdriver 325 VDE TX 27 x125 SlimFix
Screwdriver type: Torx / Tip: TX27 / Shank length: 125 mm
TORX screwdriver 325 VDE TX 30 x125 SlimFix
Screwdriver type: Torx / Tip: TX30 / Shank length: 125 mm
TORX screwdriver 325 VDE TX 40 x 125 SlimFix
Screwdriver type: Torx / Tip: TX40 / Shank length: 125 mm

7 Products
Product No.: 3251.T10
from 16.25 CHF
excl. 8.1% tax
to the product family
The image displays six screwdrivers of various sizes. The handles are red with yellow accents and the inscription
TORX® VDE screwdriver set, 6-piece SlimFix
Screwdriver type: Torx
Torx screwdriver set, 6-piece VDE
"Wiha SoftFinish electric slimFix"
325.TX 8 x 60, 325.TX9x60
3251.T10, 3251.T15, 3251.T20, 3251.T25

Product No.: 3251N.K6.01
70.35 CHF
excl. 8.1% tax
Show product
The image shows a screwdriver with a long, slender, silver steel shaft. The handle is red and black, with the
Hexagon ballpoint screwdriver 367R "MagicRing" SoftFinish®
Hexagon ballpoint screwdriver 367R "MagicRing" 3.0 x 100
Screwdriver type: Hexagonal / Ballpoint / Tip: SW3,0 / Shank length: 100 mm
Hexagon ballpoint screwdriver 367R "MagicRing" 4.0 x 100
Screwdriver type: Hexagonal / Ballpoint / Tip: SW4,0 / Shank length: 100 mm

2 Products
Product No.: 367R.100x4.0
from 8.85 CHF
excl. 8.1% tax
to the product family
The image shows a black screwdriver with a long, thin metal head and a non-slip handle. The handle has an ergonomic shape and is labeled.
XONIC 4877X-ESD TORX®
ESD-protective
Torx screwdriver XONIC 4877X-ESD TX 04 x 50
ESD / Screwdriver type: Torx / Tip: TX04 / Shank length: 50 mm
Torx screwdriver XONIC 4877X-ESD TX 05 x 50
ESD / Screwdriver type: Torx / Tip: TX05 / Shank length: 50 mm
Torx screwdriver XONIC 4877X-ESD TX 06 x 50
ESD / Screwdriver type: Torx / Tip: TX06 / Shank length: 50 mm
Torx screwdriver XONIC 4877X-ESD TX 07 x 50
ESD / Screwdriver type: Torx / Tip: TX07 / Shank length: 50 mm
Torx screwdriver XONIC 4877X-ESD TX 08 x 60
ESD / Screwdriver type: Torx / Tip: TX08 / Shank length: 60 mm

5 Products
Product No.: 4877X-ESDTX07x50
from 7.35 CHF
excl. 8.1% tax
to the product family
The image shows a silver screwdriver with a long, thin handle. The handle is gray with black rubber trim, providing good grip. The tip is designed for Torx screws.
Preview: The image shows a screwdriver with a gray handle and a long, slender metal tip. The handle has a smooth surface and a special shape for better grip.
Preview: The image shows a screwdriver with a long, narrow metal shaft and a gray handle. The handle is slightly ridged to provide better grip, and the screw head has a special shape.
Preview: The image shows a screwdriver with an ergonomic, gray handle and a narrow, elongated blade. The blade features a Phillips head, ideal for screwing.
Preview: The image shows a screwdriver with a long, narrow metal attachment and a gray, non-slip handle. The handle has black rubber areas for better grip.
Preview: The image shows a screwdriver with a long, thin metal shaft and an ergonomic gray handle that has black rubber inserts for better grip.
Preview: The image shows a silver screwdriver with a long, thin handle. The handle is gray with black rubber trim, providing good grip. The tip is designed for Torx screws.
Preview: The image shows a screwdriver with a long, narrow metal shaft and a gray, rubberized handle. The handle has a round shape and two elongated grooves for better grip.
TORX TR® screwdriver PG5
ESD-protective
Torx screwdriver TR 05 x 50
ESD / Screwdriver type: Torx tamper-resistant (with hole) / Tip: TR05 / Shank length: 50 mm
Torx screwdriver TR 06 x 50
ESD / Screwdriver type: Torx tamper-resistant (with hole) / Tip: TR06 / Shank length: 50 mm
Torx screwdriver TR 07 x 50
ESD / Screwdriver type: Torx tamper-resistant (with hole) / Tip: TR07 / Shank length: 50 mm
Torx screwdriver TR 08 x 60
ESD / Screwdriver type: Torx tamper-resistant (with hole) / Tip: TR08 / Shank length: 60 mm
Torx screwdriver TR 09 x 60
ESD / Screwdriver type: Torx tamper-resistant (with hole) / Tip: TR09 / Shank length: 60 mm
Torx screwdriver TR 10 x 60
ESD / Screwdriver type: Torx tamper-resistant (with hole) / Tip: TR10 / Shank length: 60 mm
Torx screwdriver TR 15 x 60
ESD / Screwdriver type: Torx tamper-resistant (with hole) / Tip: TR15 / Shank length: 60 mm

7 Products
Product No.: PG5-4.D
from 4.85 CHF
excl. 8.1% tax
to the product family
The image shows a screwdriver with a black, non-slip handle that has yellow accents. The blade is straight and narrow, suitable for precise screws.
Preview: The image shows a screwdriver with a black handle and yellow details. The blade is straight, metallic, and has a star-shaped tip. There are size markings on the handle.
Preview: The image shows a screwdriver with an ergonomic, black-and-yellow handle. The tip is star-shaped and has a narrow metal blade. The brand logo and model name are visible.
Preview: The image shows a screwdriver with a black, non-slip handle that has yellow accents. The blade is straight and narrow, suitable for precise screws.
Micro-screwdriver 1567 ESD TORX
ESD-protective
Micro-screwdriver 1567 TX 4 x 40
ESD / Screwdriver type: Torx / Tip: TX4 / Shank-Ø: 2.5 mm / Shank length: 40 mm / Handle length: 97 mm
Micro-screwdriver 1567 TX 5 x 40
ESD / Screwdriver type: Torx / Tip: TX5 / Shank-Ø: 3.0 mm / Shank length: 40 mm / Handle length: 97 mm
Micro-screwdriver 1567 TX 6 x 40
ESD / Screwdriver type: Torx / Tip: TX6 / Shank-Ø: 3.0 mm / Shank length: 40 mm / Handle length: 97 mm

3 Products
Product No.: WE-1567ESD.TX6x40
from 9.30 CHF
excl. 8.1% tax
to the product family
The image shows a series of black screwdrivers in various sizes, arranged from left to right. Each has a long, thin metal shaft and an ergonomic handle.
Preview: The image shows a series of black screwdrivers in various sizes, arranged from left to right. Each has a long, thin metal shaft and an ergonomic handle.
Preview: The image shows four screwdrivers with black handles and yellow prints. The blades vary in length and are pointed, suitable for delicate work on electronics.
XONIC ESD screwdriver sets 4-piece SL/PH
ESD-protective
ESD screwdriver set 7-piece XONIC
ESD / Screwdriver type: Slotted / Crosstip (Philips)
ESD screwdriver set 4-piece XONIC
ESD / Screwdriver type: Crosstip (Philips) / Slotted

2 Products
Product No.: 4883X-ESD
from 23.80 CHF
excl. 8.1% tax
to the product family
49 to 64 (from a total of 90)