Power supply unit 230 V AC for the retrofitting
Handy tester for permanent monitoring of wrist strap systems. Disruptions of the grounding are reported by a warning signal. Suitable for standard spiral cables with snap 10 mm or BA 4 mm
Technical data:
| Operating voltage: | 9 V power unit according to IEC/DIN 6F22 |
| Battery life: | > 1 year (8 hours daily no fault message) |
| Connectors: | 10 mm snap for spiral cable |
| Measurand: | Measurement capacitive of the impedance |
| Measuring range: | 1 MOhm ... (100 pF + 2 MOhm) within limits |
| HI-Fail > 5 MOhm; LO-Fail < 400 kOhm | |
| Test voltage: | DC < 0.01 volt; AC < 4.00 volt |
| Test current 1.0 MOhm load: | DC < 0.01 µA |
| AC < 1.00 µA | |
| Housing material: | ABS black, dissipative (excepting label) |
| Environmental conditions: | Temperature range: 10°C - 40°C |
| Relative humidity: 20% - 80% | |
| Dimensions: | 125 x 60 x 26 mm |
| Weight: | approx. 140 g (incl. battery) |
Details
Power supply unit 230V AC for retrofittingSafety Pips article 7100.181 / 7100.181.B
for the retrofitting of Safety Pips 7100.181 + 7100.181.EB from battery to mains operation
- Voltage Voltage
- 230 V
Show accessories
Accessories
Downloads
- Please log in to download datasheets! :
- There are several datasheets for this product. Please log in!
Catalogues
Product Family
| Recommended calibration interval | Test voltage | Voltage | H [mm] | L [mm] | W [mm] | Humidity | Price | Compare | ||
|---|---|---|---|---|---|---|---|---|---|---|
|
7100.181 Tester Safety Pips with warning signal |
| 24 months bzw. according to test equipment list | 0.01 - 4.00 V | 9 V | 26 | 125 | 60 | 20 - 80 % | 135.35 CHF | |
|
7100.181.EB Tester Safety Pips with warning signal incl. grounding plug |
| 24 months bzw. according to test equipment list | 0.01 - 4.00 V | 230 V | 26 | 125 | 60 | 20 - 80 % | 154.45 CHF | |
|
7100.181.K Tester Safety Pips with signal contact |
| 24 months bzw. according to test equipment list | 0.01 - 4.00 V | 230 V | 26 | 125 | 60 | 20 - 80 % | 195.40 CHF | |
|
7100.181.C Calibration unit for Safety Pips |
| 199.15 CHF | ||||||||
|
7100.181.103 Power supply unit 230 V AC for the retrofitting |
| 230 V | 57.60 CHF | |||||||
|
7100.181.H Bracket for Safety Pips |
| 20.40 CHF | ||||||||
|
7100.181.K.M Additional module for Safety Pips |
| 81.75 CHF | ||||||||
| Show Compare List (0) | ||||||||||
