Marking of safety and professional footwear
Safety shoes
Based on the current standard EN ISO 20345:2022 – DownloadPenetration protection | ||||||||||||
CLASS
|
Protective toe cap | Slip resistance prescribed (similar to SRA) |
Closed seat area (complete closed heel) |
A
Electrical resistance (0.1 - 1000 M Ohm) |
E
Energy absorption under the heel |
P |
PL
Non-metallic penetration protection Type PL |
PS
Non-metallic penetration protection Type PS |
WPA
Water penetration and absoption
|
Cleated sole |
WR
|
|
I, II | SB | |||||||||||
I | S1 | |||||||||||
I | S1P | |||||||||||
I | S1PL | |||||||||||
I | S1PS | |||||||||||
I | S2 | |||||||||||
I | S3 | |||||||||||
I | S3L | |||||||||||
I | S3S |
Professional shoes
Basic requirements
Shoes in assembled condition
Requirements (Excerpt from the standard) |
Symbols | OB | O1 | O2 | O3 |
Toe protection (200 joules) |
|||||
Slip resistance (SRA, SRB or SRC) |
Additional requirements
Shoes in assembled condition
Penetration protection |
P | ||||
Antistatic shoes |
A | ||||
Energy absorption in the heel area |
E | ||||
Thermal insulation of the sole complex |
HI | ||||
Cold insulation of the sole complex |
CI |
Shoe upper material
Water penetration and water absorption |
WRU |
Shoe upper material
Behavior towards contact heat |
HRO | ||||
Fuel resistance |
FO |
Fulfills prescribed requirements
Requirement may be fulfilled, but is not mandatory
Download