Measurement and testing

Precise measuring and testing is essential for ESD safety. Our devices reliably monitor electrostatic values - from permanent monitoring systems and surface measuring devices to high-resistance meters.

Ionizing devices, detector systems and temperature/humidity measuring devices ensure optimum conditions. Our calibration services guarantee high measurement accuracy and reliability so that your measuring devices always meet the highest standards.

 

For technical advice and support with the necessary measurements, we offer you a selection of training courses and services.

The image shows two vertical metal pillars with rounded surfaces that form a stylized barrier. The top rod is horizontal and slightly curved.
Double swing gate IKARUS HOLM
Width : 2300 mm / passage width: 1900 mm / Version: tandem installation / Locking arm/element: 2-wings, bent rail
Double swing door "IKARUS HOLM 1000"
without radar, entry and exit section 1000 mm,
Passage width approx. 1,900 mm;
2 swivel arms 900 x 300 mm Wxh, with ESD label,
KIT with LOGITURN control for 2-direction operation, as well as power supply 1 x 100 VA / 0-12 to 24 VAC, for external installation
Motorized swivel door with vertical drive and planetary gear in the stand. Blocking element as pipe elbow with 30 mm DM material V2A surface brushed. Anti-panic system by overload clutch.Factory-set holding torque max. 400 nm
Opening angle for both directions can be individually adjusted.
Blocking element reverses the closing movement new registration of a valid card.
Power supply: 24V, 50W weight: 35 kg
MADE IN EUROPE

Product No.: 6IKH.1.AEC.2
Price on request
to the product family
The image shows a white elevator cabin with a large black base. On the left side, there is a railing attached to the cabin. The design is modern and functional.
Preview: The image shows a white elevator cabin with a large black base. On the left side, there is a railing attached to the cabin. The design is modern and functional.
Preview: The image depicts a rectangular, freestanding metal railing. It features a top arch and a horizontal bar in the middle, with a sturdy base for mounting.
Accessories for barrier system COMPACT
Platform COMPACT
Rail for platform COMPACT

2 Products
Product No.: 21553-N
from 763.10 CHF
excl. 8.1% tax
to the product family
The image shows a long, rectangular red block with a slanted edge. Next to it are several green screws. The block could be used for construction or sports.
Preview: The image displays a rectangular frame with a black, textured inner field and a yellow border. The frame features a central, open field.
Preview: The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image shows a long, rectangular red block with a slanted edge. Next to it are several green screws. The block could be used for construction or sports.
Accessories for PGT 120
Mat
Wall bracket for PGT 100 / PGT 120
Divider for footwear electrode

3 Products
Product No.: 7100.PGT120.TS
from 55.30 CHF
excl. 8.1% tax
to the product family
The image shows a rectangular device with a yellow frame and a screen. The display shows information such as temperature, humidity, and a date/time stamp. An RFID symbol is visible.
Data Terminal Controller DT3
Data terminal controller DT3 incl. display, RFID
Reader and relay contact


Interfaces:
x USB
1 x D-SUB9 für PGT120.COM
1 x RJ45 - LAN
1 x RJ12 - Relais
1 x Micro USB - RFID Reader
1 x Micro USB - POWER 5VDC

Product No.: 7100.PGT120.COM.DT3
Price on request
Show product
The image shows a touchscreen monitor displaying instructions for conducting a test. On the screen, outlines of feet and a hand are depicted.
Touch Screen Monitor TC18 incl. DATA Terminal
Touch screen monitor TC18 incl. DATA terminal for
PGT120.com, 10-inch capacitive, with integrated
MiniPC (DATA Terminal), LAN connection RJ45,.
4 x USB2. 0, 1 x COM RS232
Scope of delivery:
1 x touch-PC
1 x EU connection cable
1 x power supply unit
4 x fixing brackets
1 x quick start guide

Product No.: 7100.PGT120.COM.TC18
Price on request
Show product
The image shows a simple, flat, rectangular card in white. It has no visible patterns or text and resembles a credit card. The surface is smooth.
Preview: The image shows a white shoe with a transponder pocket, a cable, and a shoe electrode. This is used for separate measurement of left and right shoes.
Preview: The image shows a simple, flat, rectangular card in white. It has no visible patterns or text and resembles a credit card. The surface is smooth.
Accessories for PGT2000 Personal test station
ESD-protective
ID module (transponder)
ID card (transponder card)

2 Products
Product No.: 7100.PGT2000.IDCARD
from 7.70 CHF
excl. 8.1% tax
to the product family
The image displays an electronic device labeled
Preview: The image shows a device called
Preview: The image displays an electronic device labeled
Workstation monitor WS Aware
ESD-protective
WS Aware Workstation monitor Standard Remotes
ESD
WS Aware Workstation monitor Big Brother
ESD

2 Products
Product No.: 770068
from 1,190.80 CHF
excl. 8.1% tax
to the product family
The image displays a device with a black casing and a labeled screen. There are buttons and LEDs to indicate statuses like
Workstation monitor tester CTE701A
ESD
Workstation monitor tester 3M type CTE701A

Product No.: 3M-CTE701A
1,704.30 CHF
excl. 8.1% tax
Show product
The image shows a black device with multiple colorful LEDs in red and green, a switch for sound, and labels such as
Ground Master® grounding monitor
Ground Master® Monitor with power supply unit
24V input terminal and Ethernet connection


Serial no.:

Product No.: 770044
1,484.60 CHF
excl. 8.1% tax
Show product
The image shows three black control boxes with colored buttons and glowing LEDs. At the top is a larger box with two control indicators, below are two smaller boxes with various functions.
Dual station DS 740 permanent monitoring system
Double station type DS-740, permanent monitoring
control monitor incl. 2 connection boxes
Connection type: banana plug 4 mm
park position snap 3 mm and MagSnap

Product No.: 7110.740
507.80 CHF
excl. 8.1% tax
Show product
The picture shows a black monitor with multiple lights and a control panel. Next to the monitor is a small, rectangular device with two ports and a red symbol. Both devices are technically designed.
Workstation monitor type 724
ESD
3M workstation monitor type 724 with connection
box type 732 for 2 wrist straps
consisting of:
Monitor type 724, remote input jack 1.8 m type 732
!!! without power supply unit !!!

Product No.: 3M-724
352.50 CHF
excl. 8.1% tax
Show product
The image shows a security device with a black casing and a yellow label. It has a cable connection to a control box with three buttons that light up green.
Preview: The image shows two flat, round metal discs with a central hole. The surfaces are shiny and reflect light, and the edge is slightly raised.
Preview: The image displays a black, flexible cable with a round, flat connector on one side and a thin, straight plug on the other side.
Preview: The image shows a long, black cable that is coiled in a spiral. At one end, there is a ring-shaped connector that serves as the connection point.
Preview: The image shows a gray power supply with a label on the top. It has a long cable and a small plug for an outlet. The shape is rectangular and compact.
Preview: The image displays a rectangular, flat metal bracket. It has cut-out openings and features a silver, shiny surface. The edges are sharp and clearly defined.
Preview: The image shows a security device with a black casing and a yellow label. It has a cable connection to a control box with three buttons that light up green.
Preview: The image shows a handy measuring device with a silver casing. It has a round dial in the center and two cables with plugs in different colors sticking out.
Preview: The image displays a black device with yellow lettering. It features a round dial in the center and two connectors. Next to the device, there is a small, black pen with two metallic tips.
Preview: The image shows a small black switch with several green LEDs. Labels on the top read
NEW
NEW
Accessories for surveillance monitors
ESD-protective
Ring magnets for Mini Monitor
Connecting cable Iron Man Plus / Table mat DK 10mm
Connecting cable Iron Man Plus / Grounding
Power supply unit 230 V AC for Safety Pips
Bracket for Safety Pips
Additional module for Safety Pips
Control unit type 98221 for surveillance monitors
Calibration unit for Safety Pips
Remote Alarm (for single station ES-652 permanent monitoring)

9 Products
Product No.: 7100.181.K.M
from 5.05 CHF
excl. 8.1% tax
to the product family
The image shows an opened aluminum toolbox. It contains various measuring devices, cables, and accessories, securely embedded in foam. The case has a convenient handle.
Preview: The image shows an opened metal case lined with foam inside. It contains a yellow device, as well as several tools and cables, neatly arranged.
Preview: The image shows an opened aluminum toolbox. It contains various measuring devices, cables, and accessories, securely embedded in foam. The case has a convenient handle.
ESD Audit case Metriso 3000 with walking test set and electrode
ESD Audit case Metriso 3000 with walking test kit and electrode type 850
ESD Audic case Metriso 3000 with walking test kit and electrode 870

2 Products
Product No.: 7110.600.Set.WT.870
from 6,908.60 CHF
excl. 8.1% tax
to the product family
The picture shows a silver suitcase with a telescopic handle, standing on wheels. On the front, the inscription
Preview: The picture shows a silver suitcase with a telescopic handle, standing on wheels. On the front, the inscription
Preview: The image shows a black power adapter with two socket pins on one side and a cable leading to a round plug. The cable is coiled and moves sideways.
Preview: The image shows a rechargeable battery holder made of black plastic with three green cells. The cells are printed with information, and there are connectors on the top.
Preview: The image shows a multimeter cable with two colored test probes: one red and one black. The cable is flexible and has a plug at one end.
Preview: The image shows a cable reel with blue cord. The reel is round, has a central axis, and several holes in the rim. At one end of the cord, there is a connector plug.
Preview: The image shows a black hand scanner with blue accents. It has a long cable connection that leads to a rectangular plug. Ideal for scanning barcodes.
NEW
NEW
Accessories for METRISO®
Audit case ESD empty for Metriso
Wide-range charger for rechargeable battery pack Metriso 3000
Rechargeable battery pack for Metriso 3000
Replacement measuring lead set (com/shield + positive lead) for Metriso
Cable reel 50 m (for METRISO® 2000, 3000 and 530)
Barcode scanner for 2D and 1D codes for Metriso 3000

6 Products
Product No.: 7110.600
from 95.65 CHF
to the product family
The image shows a black suitcase that is open. Inside, there are two yellow devices and a cable, surrounded by foam padding for protection and support.
Starter kit SRM200 / EFM51
SRM 200 / EFM 51 Starter Kit, for measuring
conductive/dissipative surfaces and
electrostatic fields/charges
consisting of:
SRM 200 pocket meter, EFM 51 electric field meter and conductive case

Product No.: 7100.SRM200.SK51
1,469.80 CHF
excl. 8.1% tax
Show product
The image shows a black suitcase, open, with a special foam insert. Inside, there is a round, black object with yellow lettering, a metallic bracket, and two blue cables.
Two-sided electrode model 890 set
Two-side electrode model 890 SET incl. stainless
steel plate, insulating plate, blue guard line, -
calibration certificate + conductive carrying case
corresponds to DIN EN 61340-4-1 / DIN EN 61340-2-3

Product No.: 7220.890.SET
622.45 CHF
excl. 8.1% tax
Show product
81 to 96 (from a total of 119)