DAkkS/DKD calibration for electrode model 850

ArticleNo: 7220.850.KA.DAkkS/DKD

dpvlink:

32746

Calibration for:

Measuring electrode ETS type 850

Further product information

Compare

Notice / Inquire

Product Info

DAkkS/DKD calibration for electrode model 850

The DAkkS/DKD calibration for the electrode Mod. 850 is an essential service offering that ensures the accuracy and reliability of your measuring device. This calibration is specifically designed to check and certify the functioning of the electrode according to strict specifications and standards.
The calibration must be performed at regular intervals, based on factors such as frequency of use and specific operating conditions. Recommendations for calibration intervals typically vary between one and three years and should be adjusted according to the internal test equipment list.
To perform the calibration, it is necessary to send in the device. Upon completion of the calibration, you will receive a certificate that confirms compliance with the calibration standards, thus enabling the reliable continued use of the electrode in your measurement and testing processes.

Details

Calibration for Calibration for: Measuring electrode ETS type 850

Show accessories

Accessories

Measuring electrode ETS type 850

Height : 120 mm / Ø: 63.5 mm / Recommended calibration interval: 4 years

Measuring electrode model 850 ets
Diameter 63.5 mm / 2.27 kg
(DIN IEC 61340-5-1 and 61340-2-3)

dpvlink

4699

192.15 CHF

Show product

Documents

Downloads

For this article you will find, for example, (operating) instructions, product and material information, care instructions, safety and technical data sheets. Please log in or register now to access the documents.

Product Family

Calibration for electrodes

Regular calibration of electrodes is important to ensure they function correctly. The frequency at which calibration should be carried out depends on various factors, such as frequency of use, operating conditions, requirements set out in standards, or the equipment manufacturer’s specifications.

Depending on the electrode, the recommended calibration intervals can vary between 1 and 3 years. The exact details are usually set out in an in-house list of test equipment.