The picture shows a small, hexagonal, black mini-sensor with two metal pins on the top and a round connector on the bottom. A golden plaque bears the inscription "SRM Mini Probe Model 410".
The image shows a portable measuring device with a black casing and yellow buttons. It has a digital display and a detachable sensor at the top. Ideal for technical measurements.
The image displays a black rectangular electric testing device with a plug. At the top, colorful LEDs and a pressed button are visible. It is used for checking electrical connections.
Preview: The picture shows a small, hexagonal, black mini-sensor with two metal pins on the top and a round connector on the bottom. A golden plaque bears the inscription "SRM Mini Probe Model 410".
Preview: The image shows a portable measuring device with a black casing and yellow buttons. It has a digital display and a detachable sensor at the top. Ideal for technical measurements.
Preview: The image displays a black rectangular electric testing device with a plug. At the top, colorful LEDs and a pressed button are visible. It is used for checking electrical connections.
SRM Mini Probe 410 for SRM 110 / SRM 200
(Product No.: 7220.410)
The picture shows a small, hexagonal, black mini-sensor with two metal pins on the top and a round connector on the bottom. A golden plaque bears the inscription "SRM Mini Probe Model 410".
The image shows a portable measuring device with a black casing and yellow buttons. It has a digital display and a detachable sensor at the top. Ideal for technical measurements.
The image displays a black rectangular electric testing device with a plug. At the top, colorful LEDs and a pressed button are visible. It is used for checking electrical connections.
Mobile Preview: The picture shows a small, hexagonal, black mini-sensor with two metal pins on the top and a round connector on the bottom. A golden plaque bears the inscription "SRM Mini Probe Model 410".
Mobile Preview: The image shows a portable measuring device with a black casing and yellow buttons. It has a digital display and a detachable sensor at the top. Ideal for technical measurements.
Mobile Preview: The image displays a black rectangular electric testing device with a plug. At the top, colorful LEDs and a pressed button are visible. It is used for checking electrical connections.
Notice / Inquire

SRM Mini Probe 410 for SRM 110 / SRM 200

dpvlink:
20636
Further product information
 
217.05 CHF

excl. 8.1% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

SRM Mini Probe 410 for SRM 110 / SRM 200

The SRM Mini Probe 410 is a highly specialized electrode, designed for precise point-to-point resistance measurements in small packaging. This model allows for the verification of specific requirements throughout the entire process chain and is specifically designed for use with the surface resistance meters SRM 110 or SRM 200. The electrode is attachable and enables measurements even in hard-to-reach recesses such as deep-draw trays.
The SRM Mini Probe 410 features spring-loaded electrode pins that ensure uniform pressure (spring force approximately 3.5 N), and a conductive contact rubber with a resistance of less than 20 Ohms and a hardness of 55 Shore A. The total resistance of the electrode on a metal plate is below 500 Ω, with an electrode distance of 6.4 mm. Connection is made via a 4 mm banana plug.
It is recommended to calibrate the electrode every 24 months or according to the test equipment list to always ensure accurate measurement results.
Recommended calibration interval
Recommended calibration interval
24 months bzw. according to test equipment list
Show accessories
Accessories

Accessories

The image displays a black surface resistance meter with a large white button in the center and two sockets at the bottom. Colored scales for resistance values are shown at the top.
SRM 110 Surface resistance tester
SRM 110 - surface resistance meter
incl. storage bag, grounding wire,
9V battery and factory calibration certificate

Serial no.:
dpvlink
4662

331.40 CHF
Show product
The image shows a handy device with a black casing and a yellow surface. It has a digital display and several buttons, including a large red central button.
SRM 200 Surface resistance meter
SRM 200 - surface resistance meter
handheld meter for the testing of
conductive and disspative surfaces
dpvlink
14273

698.05 CHF
Show product
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Catalogues

Page: 208
Complete Catalog 2023 - 2024

Product Family

SRM Mini Probe 410

The electrode SRM Mini Probe 410 is suitable for point-to-point resistance measurements on small packaging. Check your specific requirements during the process chain.

  • Verification measurements on small packages
  • For connection to surface resistivity meter SRM 110 or SRM 200
  • Measurements in cavities (e.g. vacuum-formed trays) possible
  • Uniform pressure due to spring-loaded electrode pins (spring force approx. 3.5 N)
  • Contact rubber conductive (R < 20 Ohm, 55 Shore A, Ø 4 mm)
  • Total resistance of the electrode on metal plate < 500 Ω
  • Electrode spacing 6.4 mm
  • Connector 4 mm banana plug


Article image
Article description
ESD
Recommended calibration interval
Price
Compare
7220.410 - SRM Mini Probe 410 for SRM 110 / SRM 200
7220.410
SRM Mini Probe 410 for SRM 110 / SRM 200
24 months bzw. according to test equipment list
217.05 CHF
Show Compare List (0)

This product is similar to:

The image shows a handy device with a black casing and a yellow surface. It has a digital display and several buttons, including a large red central button.
SRM 200 Surface resistance meter
SRM 200 - surface resistance meter
handheld meter for the testing of
conductive and disspative surfaces
dpvlink
14273

698.05 CHF
Show product
The image displays a black surface resistance meter with a large white button in the center and two sockets at the bottom. Colored scales for resistance values are shown at the top.
SRM 110 Surface resistance tester
SRM 110 - surface resistance meter
incl. storage bag, grounding wire,
9V battery and factory calibration certificate

Serial no.:
dpvlink
4662

331.40 CHF
Show product