Soldering and desoldering tips

These high-quality soldering and desoldering tips are characterized by precision, durability and efficient heat transfer. They are optimally matched to modern soldering tools and enable reliable work on a wide range of soldering tasks - from professional electronics work to delicate repair work.

Thanks to fast heat-up times and intelligent cutting-edge technologies, they offer consistent performance for both delicate and power-intensive applications. A wide range of shapes and sizes ensures that the right tip is available for every requirement. Weller and JBC soldering tips are system-specific and only compatible with the respective soldering stations.

Flux and solder alloy

Too much active flux can cause corrosion. IPC recommends: ROL, REL and ORL. The internal flux of small diameter solder rolls may not be sufficient. Provide compatible external flux if required.

Oxidation

Iron oxide does not wet well and does not transfer temperature (dewetting). The higher the temperature, the greater the risk of oxidation. Always keep the soldering tips tinned when not in use. Use flux for your solder joints. Use the sleep and hibernate functions.

Thickness of the iron coating

Plate wear shortens the service life of the tip (hollowing). Use the cleaning methods specified by the manufacturer. Do not apply too much pressure to the tip.

Correct techniques

Excessive pressure on the soldering surface can cause the tip or plate to break. Do not use as a pointed object or screwdriver. Select the largest possible tip for each application and work at the lowest possible temperature.

Working temperatures

The higher the temperature, the greater the oxidation and corrosion. Work at the lowest possible temperature. Use thermally efficient tools and ensure that the tips are free from oxidation.

 

Our Brands

JBC Weller
The image shows a metallic pointed cone that is wider at the base and tapers towards the top. The surface is shiny and reflects light, giving it a smooth appearance.
LT Soldering tip round sloped
Soldering tip round sloped LT F
Head size: 1.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece
XNT Soldering tip round sloped LT F
Head size: 1.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: loose / Package size: 10 piece

2 Products
Product No.: 544.408.10
from 5.70 CHF
excl. 8.1% tax
  to the product family
The image displays a silver, cylindrical pen with a pointed tip and a flat end. It is lying at an angle on a white surface. Simple, modern design.
Preview: The image displays a silver, cylindrical pen with a pointed tip and a flat end. It is lying at an angle on a white surface. Simple, modern design.
Preview: It is a shiny, slender cylinder with a pointed front and a wider, flat end. The surface appears metallic and smooth.
Preview: It is a long, slender, metallic object with a pointed tip. The rear part is wider and has a ring-shaped indentation. The surface is smooth and shiny.
Preview: The image shows a cylindrical metal cylinder with sharp, rounded ends. The cylinder has a smooth, shiny surface and is wider at the base.
XT Soldering tip round
Soldering tip round XT O
Head size: 1.0 mm / Soldering tip shape: round / suitable soldering iron: WP 120 / WXP 120 / Length : 37 mm / Packing: individually / Package size: 1 piece
Soldering tip round XT BS
Head size: 2.4 mm / Soldering tip shape: round / suitable soldering iron: WP 120 / WXP 120 / Length : 37 mm / Packing: individually / Package size: 1 piece
Soldering tip round XT CS
Head size: 3.2 mm / Soldering tip shape: round / suitable soldering iron: WP 120 / WXP 120 / Length : 37 mm / Packing: individually / Package size: 1 piece
Soldering tip round XT DS
Head size: 5.0 mm / Soldering tip shape: round , straight / suitable soldering iron: WP 120 / WXP 120 / Length : 35 mm / Packing: individually / Package size: 1 piece

4 Products
Product No.: 544.714.99
from 10.40 CHF
excl. 8.1% tax
to the product family
The image shows a technical drawing of a tool attachment. The top features the head of the attachment with a slanted edge. Below, a curved handle is depicted in a side view. Dimensions are provided.
Preview: The image displays technical drawings of a narrow, conical tool with two views. Dimensions are provided in millimeters, including a curved line.
Preview: The image displays technical drawings of a sharp tool with various views. Dimensions are provided: a length of 13 mm and a diameter of 0.8 mm.
Preview: The image displays technical drawings of a narrow, curved tool with a pointed end. It includes measurements in mm and inches and describes the shape and dimensions of the tool.
Preview: The image displays technical drawings of a nozzle-shaped attachment with various views. The attachment has a narrow opening and is marked with dimensions in millimeters.
Preview: The image displays technical drawings of a tool with a slim, curved attachment. Dimensions are provided, including length, width, and diameter.
Preview: The image displays technical drawings of a narrow, curved tool with a pointed end. Dimensions are provided that describe the shape and size of the tool.
Preview: The image displays technical drawings of a tool attachment. Various views are shown, including the tip and the cylindrical body with dimensions in millimeters.
Preview: The image displays technical drawings of a tool with a pointed end and a curved handle. Dimensions are noted. It has a cylindrical head and a precise cutting surface.
Preview: The image displays technical drawings of a straight, narrow tube with a rounded end and a longer hose. The dimensions are provided. It is a precise tool.
Preview: The image displays technical drawings of a special tool with a curved end. There are dimensions in millimeters and a detailed view of the tool's structure.
Preview: The image shows a technical drawing of a tool attachment. The top features the head of the attachment with a slanted edge. Below, a curved handle is depicted in a side view. Dimensions are provided.
Preview: The image displays a technical part, likely a tool. It features a curved tip and various views. Measurements are provided in millimeters.
Preview: The image displays technical drawings of a tool. It has a long, thin body with a pointed, flat tip. Dimensions are provided in millimeters.
Preview: The image shows a technical drawing of a sharp tool with an ergonomically shaped handle. It features dimensions and a curved shape that ensures precision.
Preview: The image shows a technical drawing of a pen-like object with a pointed tip. Dimensions are provided in millimeters, and the drawing includes front and side views.
Preview: The image displays technical drawings of a narrow, angled instrument with a cylindrical handle. Dimensions are given in millimeters. Multiple views are shown.
Preview: The image shows a technical drawing of a tool with a conical end and a long, narrow shape. Dimensions and a special identification number are provided.
JBC soldering tips C250 for AL250
Soldering tip C250-401
Head size: 0.6 mm / Soldering tip shape: tapered , bent / suitable soldering iron: AL250
Soldering tip C250-402
Head size: 0.8 mm / Soldering tip shape: tapered , bent / suitable soldering iron: AL250
Soldering tip C250-403
Head size: 1.0 mm / Soldering tip shape: tapered , bent / suitable soldering iron: AL250
Soldering tip C250-404
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
Soldering tip C250-405
Head size: 1.8 x 0.8 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
Soldering tip C250-406
Head size: 2.0 x 1.0 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
Soldering tip C250-407
Head size: 1.2 x 0.7 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: AL250
Soldering tip C250-408
Head size: 2.2 x 1.0 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: AL250
Soldering tip C250-409
Head size: 1.7 mm / Soldering tip shape: round , bent / suitable soldering iron: AL250
Soldering tip C250-410
Head size: 2.2 mm / Soldering tip shape: round , bent / suitable soldering iron: AL250
Soldering tip C250-411
Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , straight / suitable soldering iron: AL250
Soldering tip C250-412
Head size: 4.8 x 1.5 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
Soldering tip C250-413
Head size: 2.2 x 1.0 mm / suitable soldering iron: AL250
Soldering tip C250-414
Head size: 2.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: AL250
Soldering tip C250-415
Head size: 3.8 mm / Soldering tip shape: round , sloped / suitable soldering iron: AL250
Soldering tip C250-418
Head size: 3.2 x 1.5 mm / Soldering tip shape: chisel-shaped , bent / suitable soldering iron: AL250
Soldering tip C250-420
Head size: 0.4 mm / Soldering tip shape: pointed , bent / suitable soldering iron: AL250

17 Products
Product No.: JBC-C250-411
46.60 CHF
excl. 8.1% tax
to the product family
The image shows a narrow, metallic pen with a pointed tip. The grip is rubberized and has a ribbed surface for better hold. A connector is visible at the end.
Soldering tip round sloped 45° RTM 012 B MS
Head size: 1.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: WXMP MS / WMRP MS / Length : 18 mm / Packing: individually / Package size: 1 piece
RT-6 soldering tip / round beveled 45 °
1.2 mm

Product No.: 544.620.99
46.30 CHF
excl. 8.1% tax
Show product
The image shows a silver pen with a round, rounded tip. The pen has a plain, metallic surface and is cylindrically shaped.
Soldering tip round sloped XNT 4
Soldering tip size (head): 1.2 mm / Soldering tip shape: round , sloped 45° / suitable soldering iron: WXP 65 / WTP 90 / Packing: individually / Package size: 1 piece
XNT 4 soldering tip 45° diameter 1.2 mm
+++ individually packaged ++
!!for WP65 and WXP 65 + WTP 90 !!

Product No.: 544.855.99
8.65 CHF
excl. 8.1% tax
Show product
The image shows a tool with a rubberized, black handle and a pointed, metallic tip. The handle is non-slip and features a textured surface for better grip.
Preview: The image shows a tool with a rubberized, black handle and a pointed, metallic tip. The handle is non-slip and features a textured surface for better grip.
Preview: The image shows a pen-like object with a black rubberized grip and a metallic tip. The grip has a grooved structure for better hold.
RTMS Soldering tip round sloped MS
Soldering tip round sloped RTMS 012 B MS
Head size: 1.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: WXMPS MS / Length : 18 mm
Soldering tip round sloped RTMS 004 B MS
Head size: 0.4 mm / Soldering tip shape: round , sloped / suitable soldering iron: WXMPS MS / Length : 18.5 mm

2 Products
Product No.: 501.095.99
from 44.20 CHF
excl. 8.1% tax
to the product family
The image shows a silver pen or needle with a tapered end. The body is cylindrical and has a larger diameter at the base.
Preview: The image shows a silver metal pen with a sharp, conical shape. The wide base tapers upwards, ideal for precise work or drawing.
Preview: The image shows a silver pen or needle with a tapered end. The body is cylindrical and has a larger diameter at the base.
Preview: The image shows a narrow, metallic tool attachment with a flat tip. It has a conical shape and a round handle that is indented in the middle. The surface is shiny and silver.
ET Soldering tips chisel-shaped long
Soldering tip chisel-shaped long ET-KL
Head size: 1.2 x 0.8 mm / Soldering tip shape: chisel-shaped , long / suitable soldering iron: LR-21 / FE 50 / Length : 44 mm
Soldering tip chisel-shaped long ET L
Head size: 2.0 x 1.0 mm / Soldering tip shape: chisel-shaped , long / suitable soldering iron: LR-21 / FE 50 / Length : 43.5 mm
Soldering tip chisel-shaped long ET M
Head size: 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped , long / suitable soldering iron: LR-21 / FE 50 / Length : 43.5 mm

3 Products
Product No.: 4ETL-1
6.55 CHF
excl. 8.1% tax
to the product family
The image shows a silver, pointed pen that has a conical shape. The tip is gray-colored and narrow, while the body is round and smooth.
Preview: The image shows a silver pencil with a sharp point. The body of the pencil is cylindrical and ends in a narrow tip. It is resting on a neutral surface.
Preview: The image shows a silver pencil that tapers to a thin, sharp point. It has a smooth body and a circular, slightly raised area in the middle. The entire pencil has a metallic shine.
Preview: The image shows a silver, pointed pen that has a conical shape. The tip is gray-colored and narrow, while the body is round and smooth.
Preview: The image shows a silver pen with a pointed, gray lead. The pen has a cylindrical body and a wide, smooth surface. The lead is narrow and slightly rounded.
Preview: The image shows a narrow, silver screwdriver with a flat end. The handle is smooth and cylindrical, while the tip is slightly beveled to turn screws.
Preview: The image shows a silver flathead screwdriver. It is elongated, slightly beveled at one end, and has a shiny, metallic shaft.
Preview: The image shows a slender, metallic object with a flat, wide end. The body is silver and has a slightly narrowed area in the middle. The head has a machined, rounded shape.
ET Soldering tips chisel-shaped
Soldering tip chisel-shaped ET H
Head size: 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: LR-21 / FE 50 / Length : 34,5 mm
Soldering tip chisel-shaped ET-HL
Head size: 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: LR-21 / FE 50 / Length : 34,5 mm
Soldering tip chisel-shaped ET A
Head size: 1.6 x 0.7 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: LR-21 / FE 50 / Length : 34,5 mm
Soldering tip chisel-shaped ET B
Head size: 2.4 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: LR-21 / FE 50 / Length : 34,5 mm
Soldering tip chisel-shaped ET C
Head size: 3.0 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: LR-21 / FE 50 / Length : 34,5 mm
Soldering tip chisel-shaped ET D
Head size: 4.6 x 0.8 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: LR-21 / FE 50 / Length : 34,5 mm
Soldering tip chisel-shaped ET E
Head size: 5.6 x 1.2 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: LR-21 / FE 50 / Length : 34,5 mm

7 Products
Product No.: 4ETA-1
from 5.50 CHF
excl. 8.1% tax
to the product family
The image shows a soldering iron with a long, pointed metal end and a rubberized, non-slip grip for better hold. The handle has a textured surface.
Soldering tip round sloped 45° RTM 012 B
Head size: 1.2 mm / Soldering tip shape: round , sloped 45° / suitable soldering iron: WMRP / WXMP / Length : 24 mm
RT-6/RTM 012 B soldering tip / round
beveled 45 ° 1.2 mm

Product No.: 544.606.99
30.05 CHF
excl. 8.1% tax
Show product
The image shows a conical, metallic spout with a pointed, downward tapering shape. The upper part is wider and has a solid rim.
Soldering tip round conical long bent LT 1LX
Soldering tip size (head): 0.2 mm / Soldering tip shape: tapered , bent / suitable soldering iron: WP 80 / FE 75 / Length : 26 mm / Packing: individually / Package size: 1 piece
LT-1LX tip 0.2 mm (individually wrapped)
+++ suitable for lead-free solder +++

Product No.: 544.424.99
11.70 CHF
excl. 8.1% tax
Show product
The image displays a metallic piping nozzle with a slightly curved end. The surface is smooth and shiny, and the nozzle features a wide, stable base.
Preview: The image shows a shiny, rounded metal attachment with a long, pointed opening. The attachment has a rounded base and a curved shape that slightly tilts upward at the front.
Preview: The image displays a metallic piping nozzle with a slightly curved end. The surface is smooth and shiny, and the nozzle features a wide, stable base.
Preview: The image shows a metallic, curved part with a smooth surface. It ends in a flat, rough tip that is grayer than the rest and has a round protrusion on one side.
LT Soldering tip chisel-shaped bent
Soldering tip chisel-shaped bent LT HX
Head size: 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped , bent 30° / suitable soldering iron: WP 80 / FE 75 / Length : 18 mm / Packing: individually / Package size: 1 piece
Soldering tip chisel-shaped bent LT HX
Head size: 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped , bent 30° / suitable soldering iron: WP 80 / FE 75 / Length : 18 mm / Packing: loose / Package size: 10 piece
Soldering tip chisel-shaped bent LT ALX
Head size: 1.6 x 0.7 mm / Soldering tip shape: chisel-shaped , bent 30° / suitable soldering iron: WP 80 / FE 75 / Length : 18 mm / Packing: individually / Package size: 1 piece
Soldering tip chisel-shaped bent LT BX
Head size: 2.4 x 0.8 mm / Soldering tip shape: chisel-shaped , bent 30° / suitable soldering iron: WP 80 / FE 75 / Length : 18 mm / Packing: individually / Package size: 1 piece

4 Products
Product No.: 544.443.99
from 7.70 CHF
excl. 8.1% tax
to the product family
The image displays a medical tool with a long, angled metal head and a grippy, black rubber handle. It appears precise and functional.
Preview: The image displays a medical tool with a long, angled metal head and a grippy, black rubber handle. It appears precise and functional.
Preview: The image displays a tool with a long, curved stainless steel head and a handle made from non-slip material. The handle has a textured surface for improved grip.
RTM Chisel-shaped tip bent 30°
Soldering tip chisel-shaped bent 30° RTM 013 S X
Head size: 1.3 x 0.5 mm / Soldering tip shape: chisel-shaped , bent 30° / suitable soldering iron: WMRP / WXMP / Length : 20 mm
Soldering tip chisel-shaped bent 30° RTM 008 S X
Head size: 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped , bent 30° / suitable soldering iron: WMRP / WXMP / Length : 24 mm

2 Products
Product No.: 544.603.73
from 30.05 CHF
excl. 8.1% tax
to the product family
The image shows a schematic representation of a projectile. On the left, a side view with a pointed shape, and on the right, a top view with diameter specifications.
Preview: The image shows a schematic representation of a projectile. On the left, a side view with a pointed shape, and on the right, a top view with diameter specifications.
Preview: The image displays a technical drawing of a cartridge. On the left is the side view with the length
Preview: The image shows a technical drawing of an object with a sharp, elongated shape. On the left side is the side view, on the right the top view with dimensions.
Preview: The image shows a schematic representation of a cartridge. On the left, it is viewed from the side and on the right from above. The cartridge is elongated with a rounded tip and has a diameter.
XHT Soldering tip chisel-shaped
Soldering tip chisel-shaped XHT C
Head size: 3.2 x 1.2 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXP 200 / WP200 / Length : 48 mm
Soldering tip chisel-shaped XHT D
Head size: 5.0 x 1.2 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXP 200 / WP200 / Length : 48 mm
Soldering tip chisel-shaped XHT E
Head size: 7.6 x 1.5 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXP 200 / WP200 / Length : 48 mm
Soldering tip chisel-shaped XHT F
Head size: 9.3 x 2.0 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXP 200 / WP200 / Length : 48 mm

4 Products
Product No.: 544.804.99
from 15.90 CHF
excl. 8.1% tax
to the product family
The image shows a metallic cone with a narrow, pointed tip and a wider bottom end that serves as a handle. The surface is smooth and shiny.
Preview: The image displays a silver, conical tool with a pointed, narrow end face and a wider, cylindrical part in the middle. It lies flat on a white surface.
Preview: The image shows a metallic cone with a narrow, pointed tip and a wider bottom end that serves as a handle. The surface is smooth and shiny.
ET Soldering tips pointed long
Soldering tip ET OL needle tip long, 0.8 mm
Head size: 0.8 mm / Soldering tip shape: pointed , long / suitable soldering iron: LR-21 / FE 50 / Length : 43.5 mm
Soldering tip pointed long ET-SL 0,4 mm
Head size: 0.4 mm / Soldering tip shape: pointed , long / suitable soldering iron: LR-21 / FE 50 / Length : 43.5 mm

2 Products
Product No.: 4ETSL-1
6.55 CHF
excl. 8.1% tax
to the product family
The image shows a screwdriver with a rubberized, non-slip handle. It has a long, spiraled blade and a flat attachment at the tip, which is well-suited for precision work.
Preview: The image shows a screwdriver with an ergonomic, rubberized handle. The tip is metallic and long, the handle has grooves for better grip. It appears functional and precise.
Preview: The image shows a black soldering iron with a non-slip grip. At the end, there is a silver soldering tip. The iron has an ergonomic shape for better grip.
Preview: The image shows a tool with a black, non-slip grip. At one end, there is a metallic tip that is narrow and slightly curved at the top, suitable for precise tasks.
Preview: The image shows a screwdriver with a rubberized, non-slip handle. It has a long, spiraled blade and a flat attachment at the tip, which is well-suited for precision work.
Preview: It is a tool with a shaped, non-slip handle. The tip is thin and metallic, with a spiral component at the lower end. It is compact and ergonomic.
Preview: The image shows a soldering iron with a gray handle and a non-slip surface. The tip is silver-colored and narrow. The handle has an ergonomic shape for better grip.
Preview: The image shows a black tool with a non-slip surface and a pointed end. A thin, flexible metal head protrudes from the side, suitable for precise tasks.
Preview: The image shows a screwdriver with an ergonomically shaped, black-gray ridged handle. The tip is straight and metallic, and the handle has a narrow, flexible connection to the tip.
Preview: The image shows a soldering tip with an ergonomically shaped, non-slip handle made of black rubber. The tip is metallic and has a spiral mount.
RTMS Soldering tip chisel-shaped MS
Soldering tip chisel-shaped RTMS 006 S MS
Head size: 0.6 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS / Length : 23 mm
Soldering tip chisel-shaped RTMS 010 S MS
Head size: 1.0 x 0.3 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS / Length : 18 mm
Soldering tip chisel-shaped RTMS 018 S MS
Head size: 1.8 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS / Length : 18 mm
Soldering tip chisel-shaped RTMS 022 S MS
Head size: 2.2 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS / Length : 18 mm
Soldering tip chisel-shaped RTMS 008 S MS
Head size: 0.8 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS
Soldering tip chisel-shaped RTMS 004 S MS
Head size: 0.4 x 0.2 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS / Length : 19 mm
Soldering tip chisel-shaped RTMS 013 S MS
Head size: 1.3 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS / Length : 19 mm
Soldering tip chisel-chaped RTMS 015 S MS
Head size: 1.5 x 0.4 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS / Length : 28 mm
Soldering tip chisel-shaped RTMS 003 S NW MS
Head size: 0.3 x 0.1 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: WXMPS MS / Length : 19.6 mm

9 Products
Product No.: 501.096.99
from 44.20 CHF
excl. 8.1% tax
to the product family
The image shows a silver, metallic nozzle that is slightly tilted forward. It has a round base and ends in a narrow, conical opening.
Preview: The image shows a silver metal tip with a thin, forward-bending shape. It has a wide, flat base on one side and is attached to a tool.
Preview: The image shows a silver, metallic nozzle that is slightly tilted forward. It has a round base and ends in a narrow, conical opening.
Preview: The image shows a metallic tip, slender and slightly curved. It has a smooth, silver surface and a fine, pointed bevel. The base is wider, tapering upwards.
LT Soldering tip round bent
Soldering tip round bent LT 4X
Head size: 1.2 mm / Soldering tip shape: round , bent 30° / suitable soldering iron: WP 80 / FE 75 / Length : 16.5 mm / Packing: individually / Package size: 1 piece
Soldering tip round bent LT AX
Head size: 1.6 mm / Soldering tip shape: round , bent 30° / suitable soldering iron: WP 80 / FE 75 / Length : 14.1 mm / Packing: individually / Package size: 1 piece
Soldering tip round bent LT 1X
Head size: 2.0 mm / Soldering tip shape: round , bent 30° / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm / Packing: individually / Package size: 1 piece

3 Products
Product No.: 544.427.99
11.70 CHF
excl. 8.1% tax
to the product family
17 to 32 (from a total of 119)