Soldering and desoldering tips

These high-quality soldering and desoldering tips are characterized by precision, durability and efficient heat transfer. They are optimally matched to modern soldering tools and enable reliable work on a wide range of soldering tasks - from professional electronics work to delicate repair work.

Thanks to fast heat-up times and intelligent cutting-edge technologies, they offer consistent performance for both delicate and power-intensive applications. A wide range of shapes and sizes ensures that the right tip is available for every requirement. Weller and JBC soldering tips are system-specific and only compatible with the respective soldering stations.

Flux and solder alloy

Too much active flux can cause corrosion. IPC recommends: ROL, REL and ORL. The internal flux of small diameter solder rolls may not be sufficient. Provide compatible external flux if required.

Oxidation

Iron oxide does not wet well and does not transfer temperature (dewetting). The higher the temperature, the greater the risk of oxidation. Always keep the soldering tips tinned when not in use. Use flux for your solder joints. Use the sleep and hibernate functions.

Thickness of the iron coating

Plate wear shortens the service life of the tip (hollowing). Use the cleaning methods specified by the manufacturer. Do not apply too much pressure to the tip.

Correct techniques

Excessive pressure on the soldering surface can cause the tip or plate to break. Do not use as a pointed object or screwdriver. Select the largest possible tip for each application and work at the lowest possible temperature.

Working temperatures

The higher the temperature, the greater the oxidation and corrosion. Work at the lowest possible temperature. Use thermally efficient tools and ensure that the tips are free from oxidation.

 

Our Brands

JBC Weller
The image displays a cross-section of a cylinder. There are various areas with different textures represented by lines and hatching. The front part is wider and conical.
LT Adapter for SMD tips 13.5 mm
LT adapter for SMD tips 13.5 mm
(for WSP 80 / WP 80)

Product No.: 544.417.99
28.45 CHF
excl. 8.1% tax
Show product
The image displays a narrow, cylindrical metal pin with a flattened base. The surface is smooth and shiny, and it has a hole at one end.
LT measuring tip for thermocouple Ø 0.5 m
Soldering tip size (head): 0.5 mm / Soldering tip shape: measuring tip / suitable soldering iron: WP 80 / FE 75 / Length : 13 mm
LT measuring tip for thermocouple
Diameter 0.5 mm

Product No.: 544.416.00
27.30 CHF
excl. 8.1% tax
Show product
The image shows a silver, conical nozzle. It has a round, flat base and tapers to a long, pointed end. The surface is smooth and metallic.
Soldering tip round slim bent LT 1SLX
Soldering tip size (head): 0.4 mm / Soldering tip shape: slim , bent 30° / suitable soldering iron: WP 80 / FE 75 / Length : 22 mm / Packing: individually / Package size: 1 piece
LT-1SLX soldering tip 0.4 mm
+++ suitable for lead-free solder +++
(individually packaged)

Product No.: 544.426.99
11.70 CHF
excl. 8.1% tax
Show product
It is a metallic tool with a round handle and a narrow, serrated edge at one end. The surface is smooth and silvery, and the tool has a functional shape.
Preview: It is a metallic tool with a round handle and a narrow, serrated edge at one end. The surface is smooth and silvery, and the tool has a functional shape.
Preview: The image displays a silver tool shaped like a screwdriver tip. It features a broad, square head and a cylindrical body with an additional ring in the middle.
Chip soldering / desoldering tip
Soldering tip ET SMD
Soldering tip size (head): 2.5 x 1.5 mm / Soldering tip shape: desoldering tip / suitable soldering iron: LR-21 / FE 50 / Length : 45 mm
Soldering tip ET SMD
Soldering tip size (head): 3.8 x 1.5 mm / Soldering tip shape: desoldering tip / suitable soldering iron: LR-21 / FE 50 / Length : 45 mm

2 Products
Product No.: 541.039.99
16.65 CHF
excl. 8.1% tax
to the product family
The image shows a metallic tool attachment. It is elongated with a round, flat tip and a central ring. The surface is smooth and shiny, made of silver metal.
ET GW Gullwing tip
Soldering tip shape: gullwing / suitable soldering iron: LR-21 / FE 50 / Length : 35 mm
ET-GW soldering tip

Product No.: 541.045.99
18.00 CHF
excl. 8.1% tax
Show product
The image shows a cylindrical metal rod made from brass-colored material with a smooth surface. It has a wider, flat part at one end and a hole in the center.
ET measuring tip
Soldering tip size (head): 0.5 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: LR-21 / FE 50 / Length : 30 mm
ET measuring tip for thermocouple diameter 0.5 mm

Product No.: 524.750.99
11.05 CHF
excl. 8.1% tax
Show product
The image shows a black tool attachment, elongated and cylindrical with a hexagonal recess at one end. It has a ridged surface for improved grip.
Tool for soldering tip exchange
Tool for replacing soldering tips
Item no. replaces art. no. old 587 060 43

Product No.: 587.488.61
7.60 CHF
excl. 8.1% tax
Show product
The image shows a graphic representation of ammunition. On the left is the side view of a cartridge shape with a pointed end. On the right is a cross-section that displays the internal structure.
Preview: The image shows a gray pencil with a sharp tip. Next to the pencil is a crosshair symbol, typically used for targeting accuracy.
Preview: The image shows a graphic representation of ammunition. On the left is the side view of a cartridge shape with a pointed end. On the right is a cross-section that displays the internal structure.
Preview: The image displays a technical drawing of an object with an elongated, pointed shape and a short, vertical edge on the side. Next to it is a schematic representation in the form of a circle.
HT Soldering tip chisel-shaped
Soldering tip chisel-shaped HT 1
Head size: 3.2 x 1.0 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: FE 80 / Length : 49 mm
Soldering tip chisel-shaped HT 2
Soldering tip size (head): 5.2 x 1.2 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: FE 80 / Length : 46 mm
Soldering tip chisel-shaped HT 3
Soldering tip size (head): 7.0 x 1.2 mm / Soldering tip shape: chisel-shaped / suitable soldering iron: FE 80 / Length : 46 mm

3 Products
Product No.: 544.261.99
from 30.20 CHF
excl. 8.1% tax
to the product family
The image shows a soldering iron with a long, pointed metal end and a rubberized, non-slip grip for better hold. The handle has a textured surface.
Soldering tip round sloped 45° RTM 012 B
Head size: 1.2 mm / Soldering tip shape: round , sloped 45° / suitable soldering iron: WMRP / WXMP / Length : 24 mm
RT-6/RTM 012 B soldering tip / round
beveled 45 ° 1.2 mm

Product No.: 544.606.99
30.05 CHF
excl. 8.1% tax
Show product
The image shows a tool with a rubberized, ridged handle and a metallic end. It has a long, narrow brass tip and is designed for precise tasks.
Measuring tip RTM 028 X
Head size: 0.6 mm / Soldering tip shape: measuring tip / suitable soldering iron: WMRP / WXMP / Length : 26 mm
RT / RTM 028 X measuring tip

Product No.: 544.613.99
37.90 CHF
excl. 8.1% tax
Show product
The image shows a soldering iron that is sleek and metallically shiny. The handle is ergonomic, with a textured, black rubber coating for better grip.
Preview: The image shows a soldering iron that is sleek and metallically shiny. The handle is ergonomic, with a textured, black rubber coating for better grip.
Preview: The image shows a narrow, elongated object with a sharp metal tip. The handle is thick and non-slip, with a textured surface for better grip.
Preview: The image shows a self-sharpening pencil with a hard, round, metallic tip and a rubberized, ridged grip. The grip is black and provides good traction.
Preview: The image shows a tool with a long, pointed, metallic end and an ergonomic, rubberized handle. The handle has a textured surface for improved grip.
Soldering tips conical RTM MS
Soldering tip conical RTM 002 C MS
Head size: 0.2 mm / Soldering tip shape: tapered / suitable soldering iron: WXMP MS / WMRP MS / Length : 20 mm
Soldering tip conical RTM 001 C NW MS
Head size: 0.1 mm / Soldering tip shape: tapered / suitable soldering iron: WMRP MS / WXMP MS / Length : 20 mm
Soldering tip conical RTM 008 C MS
Head size: 0.8 mm / Soldering tip shape: tapered / suitable soldering iron: WXMP MS / WMRP MS / Length : 19 mm
Soldering tip conical bent 25° RTM 005 C X MS
Head size: 0.5 mm / Soldering tip shape: tapered , bent 25° / suitable soldering iron: WMRP MS / WXMP MS / Length : 25.5 mm

4 Products
Product No.: 544.614.99
from 37.90 CHF
excl. 8.1% tax
to the product family
The image shows a screwdriver with a non-slip, black handle and a metal tip. The handle has an ergonomic shape to provide a good grip.
Preview: The image shows a screwdriver with a non-slip, black rubber handle and a chrome-plated metal tip. It has an interchangeable head for different types of screws.
Preview: The image shows a screwdriver with a non-slip, black handle and a metal tip. The handle has an ergonomic shape to provide a good grip.
Preview: In the picture is a slim screwdriver with a non-slip, rubberized handle in black. The blade is metallic and sharp, suitable for precise work.
RTP - Blade tip
ESD-protective
Soldering tip blade tip RTP 010 K
ESD / Head size: 1.0 x 0.2 mm / Soldering tip shape: blade tip / suitable soldering iron: WXPP / Length : 16.6 mm
Soldering tip blade tip RTP 010 K NW
ESD / Head size: 1.0 x 0.2 mm / Soldering tip shape: blade tip / suitable soldering iron: WXPP / Length : 16.6 mm
Soldering tip blade tip RTP 025 K
ESD / Head size: 2.5 x 0.3 mm / Soldering tip shape: blade tip / suitable soldering iron: WXPP / Length : 18 mm

3 Products
Product No.: 501.046.99
35.80 CHF
excl. 8.1% tax
to the product family
The image shows a soldering-desoldering iron with an ergonomic, non-slip handle made of black rubber and a metallic insert. The solder has a narrow, straight tip.
Gullwing tip RTP 020 G
ESD / Head size: 2.0 mm / Soldering tip shape: gullwing / suitable soldering iron: WXPP / Length : 16.6 mm
RTP 020 G gullwing tip 2.0 mm
Weller soldering tip
(suitable for soldering iron WXPP)

Product No.: 501.048.99
35.80 CHF
excl. 8.1% tax
Show product
The image shows a soldering iron with an ergonomic handle made of non-slip rubber. The handle is black and has a textured surface for better grip. The tip is shiny and metallic.
Preview: The image shows a soldering iron with an ergonomic handle made of non-slip rubber. The handle is black and has a textured surface for better grip. The tip is shiny and metallic.
Preview: The image shows a soldering iron with an ergonomically shaped handle made of black rubber. The front tip is metallic and fine, ideal for soldering.
Preview: The image shows a screwdriver with a non-slip, black handle and a silver metal tip. The tip is pointed and has a narrow shape, suitable for precise work.
Preview: The image shows a screwdriver with a non-slip, rubberized handle and a metallic tip. The handle has a textured surface for better grip.
RTP - Soldering tip conical
ESD-protective
Soldering tip conical RTP 001 C
ESD / Head size: 0.1 mm / Soldering tip shape: tapered / suitable soldering iron: WXPP / Length : 18.5 mm
Soldering tip conical RTP 001 C NW
ESD / Head size: 0.1 mm / Soldering tip shape: tapered / suitable soldering iron: WXPP / Length : 18.5 mm
Soldering tip conical RTP 002 C
ESD / Head size: 0.2 mm / Soldering tip shape: tapered / suitable soldering iron: WXPP / Length : 17 mm
Soldering tip conical RTP 004 C
ESD / Head size: 0.4 mm / Soldering tip shape: tapered / suitable soldering iron: WXPP / Length : 17 mm

4 Products
Product No.: 501.031.99
35.80 CHF
excl. 8.1% tax
to the product family
The image shows a handy tool with a non-slip, black handle and a metallic tip that is slightly curved. It is presumably used for soldering or repairing.
Preview: The image shows a tool with an ergonomic, non-slip handle. At the end, there is a narrow, pointed metal tip. The tool could be used for soldering or precision work.
Preview: The image shows a handy tool with a non-slip, black handle and a metallic tip that is slightly curved. It is presumably used for soldering or repairing.
RTP Soldering tip conical bent
ESD-protective
Soldering tip needle tip bent RTP 001 C X
ESD / Head size: 0.1 mm / Soldering tip shape: tapered , bent / suitable soldering iron: WXPP / Length : 21.3 mm
Soldering tip conical bent RTP 002 C X
ESD / Head size: 0.2 mm / Soldering tip shape: tapered , bent / suitable soldering iron: WXPP / Length : 21.3 mm

2 Products
Product No.: 501.036.99
35.80 CHF
excl. 8.1% tax
to the product family
The image shows a soldering iron with a metallic, smooth end and a rubberized, non-slip grip. The grip has a wavy structure for better hold.
RTP soldering tip round sloped
ESD-protective
Soldering tip round sloped RTP 004 B
ESD / Head size: 0.4 mm / Soldering tip shape: round , sloped / suitable soldering iron: WXPP / Length : 17 mm
Soldering tip round sloped RTP 012 B
ESD / Head size: 1.2 mm / Soldering tip shape: round , sloped / suitable soldering iron: WXPP / Length : 17 mm

2 Products
Product No.: 501.037.99
35.80 CHF
excl. 8.1% tax
to the product family
81 to 96 (from a total of 119)