Measurement and testing

Precise measuring and testing is essential for ESD safety. Our devices reliably monitor electrostatic values - from permanent monitoring systems and surface measuring devices to high-resistance meters.

Ionizing devices, detector systems and temperature/humidity measuring devices ensure optimum conditions. Our calibration services guarantee high measurement accuracy and reliability so that your measuring devices always meet the highest standards.

 

For technical advice and support with the necessary measurements, we offer you a selection of training courses and services.

The image shows a portable measuring device, primarily yellow with black elements. It features a display and five buttons used for On/Off, Mode, Start, and Stop.
CPM 35 Ionizer Tester
CPM 35 Ionizer tester for fully automatic
testing of ionizing devices
incl. grounding cable and storage bag

Product No.: 7100.CPM35
1,234.80 CHF
excl. 8.1% tax
to the product family
The image displays a square device with rounded corners, a black casing, and a gold-colored top section. It features a digital display with various buttons below it.
Preview: The image displays a square device with rounded corners, a black casing, and a gold-colored top section. It features a digital display with various buttons below it.
Preview: It is a black, rectangular device with an outlet on top and a serial interface on the bottom. On the side, there is a switch labeled
WIM 47 Ionizer Monitor
ESD-protective
WIM 47 Ionizer Monitor
ESD
WIM 47 Switch Box

2 Products
Product No.: 7100.WIM47
from 218.00 CHF
excl. 8.1% tax
to the product family
The image shows a square, black ionizer tester with a yellow top. In the center, there is a screen, and below are buttons for
Ionizer Tester CPM54
CPM 54 Ionizer Tester for standard-compliant
measurement of
the discharge time and offset voltage of
ionizers, personal charging (Body Voltage
test), color display
Scope of delivery:
Ionizer Tester CPM54
3 x Lithium Ion Batteries
Charger with EU plug
Instruction manual (DE/EN)
Calibration certificate (DE/EN)

Product No.: 7100.CPM54
3,931.20 CHF
excl. 8.1% tax
Show product
The image displays a compact electric device with a digital display and three buttons. It features a black border and a light, textured background.
CPM 35 Rubber case with foot
Rubberized housing for CPM 35 with
foldable stand

Product No.: 7100.CPM35.H
46.60 CHF
excl. 8.1% tax
to the product family
The image displays a certificate titled
Preview: The image displays a calibration certificate. It includes information on accreditation, test data, and the calibration date. The phrase
Preview: The image shows a calibration certificate. On a white background, there are details about devices, calibration data, and a green logo. At the top is the title
Preview: The image displays a certificate titled
Preview: The image displays a calibration certificate with the DPV Elektronik logo. In the background, there are two documents, and in the foreground, a yellow device with two plates is visible.
Preview: The image displays a calibration certificate document titled
Preview: The image displays a calibration certificate on two sheets of paper and a calibration device in the foreground. The document includes technical details and a logo. The device features a black casing with various connectors.
Preview: The image displays a calibration certificate from DPV Elektronik. At the top, it reads
Preview: The image displays a calibration certificate with detailed information about an electronic device. Additionally, there is a picture of a device in the corner, which is gray with yellow accents and has buttons.
Preview: The image displays a calibration certificate document with the logo of DPV Elektronik. Below it, a measuring device and a display are depicted. The date of the certificate is January 23, 2022.
Preview: The image displays a calibration certificate in German with details about the manufacturer and the device. Next to it, there is a device with a display, surrounded by a green logo.
Preview: The image displays a calibration certificate document with details about the manufacturer, type, and order specifics. In the corner, there is a yellow electronic device depicted, which has cables. A green inspection seal completes the arrangement.
Preview: The image displays a calibration certificate on a white sheet and a digital measuring device. The device's display reads 1.24. The measuring device is labeled and has buttons.
Preview: The image shows two calibration certificates with information about devices from DPV Elektronik-Service GmbH. Below, an open suitcase with measuring instruments and accessories is depicted. A green inspection mark is visible.
Preview: The image displays a calibration certificate from DPV Electronics on two documents. At the bottom right, there is a small device with two cables and a yellow attachment depicted. On the left, a round green logo.
Preview: The image displays a calibration certificate featuring the logo of DPV Electronics, surrounded by two documents. In the corner, there is a black device with a yellow sticker and a cable.
Preview: The image displays a calibration certificate in the form of two documents with a green label. In the bottom right, there is a yellow measuring device with buttons and a display depicted.
Preview: The image displays a calibration certificate with details about an electronic device and a graphic of an electrostatic field meter. At the bottom left, a green quality seal is depicted.
Preview: The image displays a calibration certificate from DPV Elektronik, featuring information about a device along with a seal of inspection. Below it, there is a case containing a measuring instrument and accessories.
Preview: The image displays a calibration certificate with textual information and a black testing device named
Preview: The image shows a calibration certificate from DPV Electronics, surrounded by two documents. Below is a device with a touchscreen and controls used for calibration.
Preview: The image shows a calibration certificate in document form and an orange measuring device with a digital display. At the bottom left, there is a green logo with the text
Calibrations for measuring equipment and calibration units
ESD-protective
DAkkS/DKD Calibration for electrostatic field meter EFM51
DAkkS/DKD Calibration for Charged Plate Set EFM51
DAkkS/DKD Calibration for electrostatic field meter EFM022
DAkkS/DKD Calibration for Charge Plate CPS022
DAkkS/DKD Calibration for PGT 120
Calibration for electrode model 850
Calibration for electrode model 870
Calibration for temperature sensor
Calibration for calibration unit EPApro
DAkkS Calibration for calibration unit EPApro
Calibration for personnel grounding tester PGT100
Calibration for electrostatic field meter EFM 022
Calibration for surface resistance meter SRM 110
Calibration for Metriso® 2000
Calibration for Walking Test kit WT 5000
Calibration for Charged Plate Set EFM 022-CPS
Calibration for Charged Plate Monitor
Calibration for GTS 267
Calibration for electrostatic field meter 718
Calibration for audit case Metriso B530 7110.B530.SET.WT
Calibration of the calibration unit for GTS 265
Calibration for Safety Pips
Calibration for surface resistance meter SRM 200
Calibration for two-point electrode of mini probe 7220.840.SET
Calibration for electrostatic field meter EFM51
Calibration for EFM51 Walking Test + Verification Kit
Calibration for Veribox
Calibration for Personnel Tester EPApro 1000
Calibration of calibration unit for PGT100
Calibration for personnel grounding tester PGT120
Calibration for thermal hygrometer TF-530

31 Products
Product No.: EPApro.1001.CU.CAL
from 46.85 CHF
excl. 8.1% tax
to the product family
Image
  End of Life
  End of Life
Accessories for ionizing bars
AeroBar 5225S Remote control
AeroBar 5225S Power supply unit
AeroBar MP 5635 Replacement emitter
AeroBar MP 5635 power supply unit

4 Products
Product No.: 7500.AB.T
Price on request
to the product family
The image shows a device called EM Eye, which is used for measuring electrostatic discharges (ESD). It has a small screen displaying measurements and an antenna on top.
Preview: The image shows a device called EM Eye, which is used for measuring electrostatic discharges (ESD). It has a small screen displaying measurements and an antenna on top.
Preview: The image shows an ESD event sensor. It has a black body with the label
Preview: The image displays an electromagnetic field sensor. It has a black base labeled
  End of Life
  End of Life
EM EYE Meter
ESD-protective
EM EYE METER with ESD sensor
ESD
ESD sensor for EM-EYE-METER
EMI Sensor for EM EYE METER

3 Products
Product No.: 3M-CTM048-21
from 1,320.80 CHF
excl. 8.1% tax
to the product family
113 to 119 (from a total of 119)