Measurement and testing

Precise measuring and testing is essential for effective ESD protection. The measuring devices reliably record electrostatic parameters - from personal test stations, such as our innovative EPApro®, to permanent monitoring systems, surface measuring devices and high-impedance measuring devices. Ionizers, detector systems and temperature and humidity measuring devices ensure optimum ambient conditions. Our calibration services ensure high measurement accuracy and conformity to standards so that your devices always meet the applicable standards.

We offer training and services for technical advice and support with measurements. You can find an overview here.

 

Our Brands

Desco EPApro Gotschlich ideal tek SCS Simco
The image displays an open, silver suitcase. Inside, there is a yellow device, numerous buttons, cables, and compartments, all neatly organized in a foam-padded interior.
ESD Audit case B530 with walking test set and electrode
ESD-protective
ESD audit case Metriso B530 with electrode type 850
ESD / Version: with electrode type 850 / Recommended calibration interval: 24 months bzw. according to test equipment list / Length : 575 mm / Width : 490 mm / Height : 250 mm
ESD audit case Metriso B530 with electrode type 870
ESD / Version: with electrode type 870 / Recommended calibration interval: 24 months bzw. according to test equipment list / Length : 575 mm / Width : 490 mm / Height : 250 mm

2 Products
Product No.: 7110.B530.SET.WT
from 5,389.90 CHF
excl. 8.1% tax
to the product family
The image displays a black surface resistance meter with a large white button in the center and two sockets at the bottom. Colored scales for resistance values are shown at the top.
SRM 110 Surface resistance tester
SRM 110 - surface resistance meter
incl. storage bag, grounding wire,
9V battery and factory calibration certificate

Serial no.:

Product No.: 7100.SRM110
340.35 CHF
excl. 8.1% tax
Show product
Image
Preview: Image
Preview: The image shows a round, yellow device with a black handle on top. It has two holes and a label that provides information about the model. It appears sturdy and handy.
Preview: The image shows a black suitcase with foam inserts and two yellow weights next to it. The suitcase has a handle and is designed for the safe transport of the weights.
Preview: The image shows three metallic rods of different lengths. Two are cylindrical and have a smooth surface at one end. A third piece is a T-shaped handle that holds the rods.
Measuring electrodes
Measuring electrode ETS type 850
Height : 120 mm / Ø: 63.5 mm / Recommended calibration interval: 4 years
Measuring electrode type 870
Height : 110 mm / Ø: 63.5 mm / Recommended calibration interval: 4 years
Measuring electrodes 870-SET
Extension three-part (for electrode 870)

4 Products
Product No.: 7220.850
from 40.30 CHF
excl. 8.1% tax
to the product family
The image shows a multimeter cable with two colored test probes: one red and one black. The cable is flexible and has a plug at one end.
Preview: The picture shows a silver suitcase with a telescopic handle, standing on wheels. On the front, the inscription
Preview: The image shows a black power adapter with two socket pins on one side and a cable leading to a round plug. The cable is coiled and moves sideways.
Preview: The image shows a rechargeable battery holder made of black plastic with three green cells. The cells are printed with information, and there are connectors on the top.
Preview: The image shows a multimeter cable with two colored test probes: one red and one black. The cable is flexible and has a plug at one end.
Preview: The image shows a cable reel with blue cord. The reel is round, has a central axis, and several holes in the rim. At one end of the cord, there is a connector plug.
Preview: The image shows a black hand scanner with blue accents. It has a long cable connection that leads to a rectangular plug. Ideal for scanning barcodes.
Accessories for METRISO®
Audit case ESD empty for Metriso
Wide-range charger for rechargeable battery pack Metriso 3000
Rechargeable battery pack for Metriso 3000
Replacement measuring lead set (com/shield + positive lead) for Metriso
Cable reel 50 m (for METRISO® 2000, 3000 and 530)
Barcode scanner for 2D and 1D codes for Metriso 3000

6 Products
Product No.: 7100.2000.ML
from 98.30 CHF
excl. 8.1% tax
to the product family
The image shows a compact, cylindrical object with a black frame and a bright yellow interior. On the side, there is a small, black bracket.
Preview: The image shows a compact, cylindrical container made of black plastic. It has a transparent inner window and a side mount. The lid is flat and smooth.
Preview: The image shows a compact, cylindrical object with a black frame and a bright yellow interior. On the side, there is a small, black bracket.
Retractable belt cartridge
Belt cartridge, empty
Belt cartridge 2.3 m German/English
Belt cartridge 2.3 m English
Belt cartridge 3.6m German/English
Belt cartridge 3.6 m English

5 Products
Product No.: 1801.G.K.36.DE
from 32.95 CHF
excl. 8.1% tax
to the product family
The image shows a standing counter with an orange sign
Preview: The image shows a standing counter with an orange sign
Preview: The image displays a rectangular frame with a yellow border and a dark interior. In the center, there are two small cutouts that resemble the shape of a cup or a container.
PGTest Station for PGT® 120.COM
PGTest Station for PGT® 120 / PGT® 120.COM
Test station mat for PG test station

2 Products
Product No.: 7100.PGT120.TEST.V01
from 308.60 CHF
excl. 8.1% tax
to the product family
The image shows a black security device with yellow labeling. It has a connection on the front, two colored LEDs (red and green), and a cable leading out from the side.
Preview: The image shows a black security device with yellow labeling. It has a connection on the front, two colored LEDs (red and green), and a cable leading out from the side.
Preview: The image displays an electronic device with a black casing and yellow labels. A cable connects it to a yellow round unit, which also has a connector.
Preview: The image shows a black device with yellow lettering, two buttons, and a connector. Next to it lies a black plug with two prongs and a short cable.
Safety Pips
Tester Safety Pips with warning signal
Width : 60 mm / Height : 26 mm / Length : 125 mm / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 9 V
Tester Safety Pips with warning signal incl. grounding plug
Width : 60 mm / Height : 26 mm / Length : 125 mm / Version: incl. grounding plug / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 230 V
Tester Safety Pips with signal contact
Width : 60 mm / Height : 26 mm / Length : 125 mm / Version: with signal contact / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 230 V

3 Products
Product No.: 7100.181
from 134.30 CHF
excl. 8.1% tax
to the product family
The image shows an electrostatic measuring device, consisting of a large, stable base unit with a display and a handheld sensor. Both are designed in yellow and black.
Preview: The image shows an electrostatic measuring device, consisting of a large, stable base unit with a display and a handheld sensor. Both are designed in yellow and black.
Preview: The image shows an open, black suitcase with individual compartments. Inside, there are various technical parts, including a metal plate, a small computer, and cables.
EFM®51-CPS / Charged Plate Set
ESD-protective
EFM 51 Electrostatic field meter with Charged Plate Set
ESD
Retrofit kit EFM 51-CPS / Charged Plate Set (without EFM® 51)

2 Products
Product No.: 7100.EFM51.CPS
from 560.05 CHF
excl. 8.1% tax
to the product family
The image displays a rectangular device with a gray front. It has two green light indicators for
Single station ES 19.652 permanent monitoring system
Single station ES 19.652, permanent monitoring
surveillance monitor 24V, incl. Power supply 220V

Connection type:
-grounding cable 3 mm or 10 mm snap (Park position)
- BA plug 4 mm or 10 mm snap (operator)
- table mat / grounding cable 10 mm snap / screw eyelet

permanent monitoring for wrist straps and table mat with 1-pole grounding cables
serial number:

Product No.: 7110.652
326.40 CHF
excl. 8.1% tax
Show product
The image shows an open black suitcase with a pink foam interior. Inside are several tools and a circular object. The suitcase has a handle.
Preview: The image shows an open black suitcase with a pink foam interior. Inside are several tools and a circular object. The suitcase has a handle.
Preview: The image shows a black calibration device with a vertical, cylindrical column. On the surface, there is a label that reads
Preview: The image shows two long, slender objects made of shiny gold, ending at the top with a small, round, gray tip. These parts appear to be tools or industrial components.
Mini probe set
Mini probe set two-point electrode
Recommended calibration interval: 24 months bzw. according to test equipment list
Calibration unit for two-point electrode model 844
Width : 100 mm / Recommended calibration interval: 3 years bzw. according to test equipment list
Replacement measuring pins for measuring head 844

3 Products
Product No.: 7220.840.SET
from 82.10 CHF
excl. 8.1% tax
to the product family
The image shows a device with a flexible neck attached to a base. At the end of the neck, there is a small lamp or camera directed at a work surface.
Preview: The image displays a technical device featuring a long, black handle and a connecting cable. At one end, there is a block marked with the inscription
Preview: The image shows a device with a flexible neck attached to a base. At the end of the neck, there is a small lamp or camera directed at a work surface.
orION / orION with Sidekick
orION Ionizer
Width : 132 mm / Height : 85 mm / Depth : 164 mm / Ozone generation max.: 0.001 ppm
orION ionizer with Sidekick (foot switch)
Width : 132 mm / Height : 85 mm / Depth : 164 mm / Ozone generation max.: 0.001 ppm / Version: with sidekick

2 Products
Product No.: 7500.O.SK
from 1,616.70 CHF
excl. 8.1% tax
to the product family
The image shows a round, black speaker with a central, bright membrane. It has a red and a black connector on the side. The outer edge is smooth and shiny.
Preview: The image shows two black, round speakers with a glossy surface. They are of different heights and are connected by cables. One has a label with a serial number on it.
Preview: The image shows a round, black speaker with a central, bright membrane. It has a red and a black connector on the side. The outer edge is smooth and shiny.
Ring electrodes sets
Ring electrode H 108
Ring electrode model 880

2 Products
Product No.: 7220.880.SET
from 516.20 CHF
excl. 8.1% tax
to the product family
The image shows a compact air ionizer with a square fan in the center. On the front, there are switches and a rotary knob for adjustments.
BlueLine - mobile ionizer (table-top model)
AB-21H BlueLine, mobile table-top model
Ionizer, 24V DC / 230V, 50 Hz


Serial no.:

Product No.: 7501.AB-21H
589.30 CHF
excl. 8.1% tax
Show product
The image displays an elongated, white device with three ventilation slots and a control panel. The control panel features buttons and displays for operation.
EPAtec ionizer (overhead model)
AB 120H BlueLine overhead model EPAtec
with 3 fans, ionizer, 230V / 50 Hz


serial no

Product No.: 7501.AB-120H
1,035.05 CHF
excl. 8.1% tax
Show product
The image shows a yellow sign with black text. It reads
Sign holder DIN A4
Sign holder DIN A4, metal frame
with mounting flange
suitable for belt barrier posts
1801.G.P.Y and 1801.G.P.B

Product No.: 1801.G.P.SA4
106.75 CHF
excl. 8.1% tax
Show product
The image shows a black, handy pair of pliers with two golden blades. The pliers have a digital display area and a grooved handle for better grip.
SMART TWEEZERS ST-5
Voltage: 3,7 V / Surface: gold plated tips
SMART TWEEZERS ST-5S
LCR METER

Serial number:..............

Product No.: ST-5S
378.55 CHF
excl. 8.1% tax
Show product
33 to 48 (from a total of 122)