Measurement and testing

Precise measuring and testing is essential for effective ESD protection. The measuring devices reliably record electrostatic parameters - from personal test stations, such as our innovative EPApro®, to permanent monitoring systems, surface measuring devices and high-impedance measuring devices. Ionizers, detector systems and temperature and humidity measuring devices ensure optimum ambient conditions. Our calibration services ensure high measurement accuracy and conformity to standards so that your devices always meet the applicable standards.

We offer training and services for technical advice and support with measurements. You can find an overview here.

 

Our Brands

Desco SCS Simco EPApro Gotschlich ideal tek
The image shows a stainless steel railing with a vertical pillar and a horizontal, elongated handle. The surface is smooth and reflective.
Single swing gate IKARUS HOLM
Width : 1134 mm / passage width: 980 mm / Version: individual system / Locking arm/element: 1-wing, bent rail
Single swing door "IKARUS HOLM 1000"
without radar, entry and exit section 1000 mm,
Passage width 950 mm,.
Swivel arm 900 x 300 mm Wxh, with ESD label,
KIT with LOGITURN control for 2-direction operation, as well as power supply 1 x 100 VA / 0-12 to 24 VAC, for external installation
Motorized swivel door with vertical drive and planetary gear in the stand. Blocking element as pipe elbow with 30 mm DM material V2A surface brushed. Anti-panic system by overload clutch.Factory-set holding torque max. 400 nm
Opening angle for both directions can be individually adjusted.
Blocking element reverses the closing movement new registration of a valid card.
Power supply: 24V, 50W weight: 35 kg
MADE IN EUROPE

Product No.: 6IKH.1.AEC
Price on request
to the product family
The image shows two vertical metal pillars with rounded surfaces that form a stylized barrier. The top rod is horizontal and slightly curved.
Double swing gate IKARUS HOLM
Width : 2300 mm / passage width: 1900 mm / Version: tandem installation / Locking arm/element: 2-wings, bent rail
Double swing door "IKARUS HOLM 1000"
without radar, entry and exit section 1000 mm,
Passage width approx. 1,900 mm;
2 swivel arms 900 x 300 mm Wxh, with ESD label,
KIT with LOGITURN control for 2-direction operation, as well as power supply 1 x 100 VA / 0-12 to 24 VAC, for external installation
Motorized swivel door with vertical drive and planetary gear in the stand. Blocking element as pipe elbow with 30 mm DM material V2A surface brushed. Anti-panic system by overload clutch.Factory-set holding torque max. 400 nm
Opening angle for both directions can be individually adjusted.
Blocking element reverses the closing movement new registration of a valid card.
Power supply: 24V, 50W weight: 35 kg
MADE IN EUROPE

Product No.: 6IKH.1.AEC.2
Price on request
to the product family
The image shows a rectangular device with a yellow frame and a screen. The display shows information such as temperature, humidity, and a date/time stamp. An RFID symbol is visible.
Data Terminal Controller DT3
Data terminal controller DT3 incl. display, RFID
Reader and relay contact


Interfaces:
x USB
1 x D-SUB9 für PGT120.COM
1 x RJ45 - LAN
1 x RJ12 - Relais
1 x Micro USB - RFID Reader
1 x Micro USB - POWER 5VDC

Product No.: 7100.PGT120.COM.DT3
Price on request
to the product family
The image shows a touchscreen monitor displaying instructions for conducting a test. On the screen, outlines of feet and a hand are depicted.
Touch Screen Monitor TC18 incl. DATA Terminal
Touch screen monitor TC18 incl. DATA terminal for
PGT120.com, 10-inch capacitive, with integrated
MiniPC (DATA Terminal), LAN connection RJ45,.
4 x USB2. 0, 1 x COM RS232
Scope of delivery:
1 x touch-PC
1 x EU connection cable
1 x power supply unit
4 x fixing brackets
1 x quick start guide

Product No.: 7100.PGT120.COM.TC18
Price on request
Show product
The image shows a device called
Preview: The image shows a device called
Preview: The image displays an electronic device labeled
Workstation monitor WS Aware
ESD-protective
WS Aware Workstation monitor Standard Remotes
ESD / Width : 81 mm / Height : 32 mm / Length : 57 mm / Recommended calibration interval: 12 months bzw. according to test equipment list
WS Aware Workstation monitor Big Brother
ESD / Width : 81 mm / Height : 32 mm / Length : 57 mm / Recommended calibration interval: 12 months bzw. according to test equipment list

2 Products
Product No.: 770067
from 1,190.80 CHF
excl. 8.1% tax
to the product family
The image displays a device with a black casing and a labeled screen. There are buttons and LEDs to indicate statuses like
Workstation monitor tester CTE701A
ESD
Workstation monitor tester 3M type CTE701A

Product No.: 3M-CTE701A
1,704.30 CHF
excl. 8.1% tax
to the product family
The image shows a black device with multiple colorful LEDs in red and green, a switch for sound, and labels such as
Ground Master® grounding monitor
Ground Master® Monitor with power supply unit
24V input terminal and Ethernet connection


Serial no.:

Product No.: 770044
1,484.60 CHF
excl. 8.1% tax
to the product family
The image shows three black control boxes with colored buttons and glowing LEDs. At the top is a larger box with two control indicators, below are two smaller boxes with various functions.
Dual station DS 740 permanent monitoring system
Double station type DS-740, permanent monitoring
control monitor incl. 2 connection boxes
Connection type: banana plug 4 mm
park position snap 3 mm and MagSnap

Product No.: 7110.740
507.80 CHF
excl. 8.1% tax
Show product
The picture shows a black monitor with multiple lights and a control panel. Next to the monitor is a small, rectangular device with two ports and a red symbol. Both devices are technically designed.
Workstation monitor type 724
ESD
3M workstation monitor type 724 with connection
box type 732 for 2 wrist straps
consisting of:
Monitor type 724, remote input jack 1.8 m type 732
!!! without power supply unit !!!

Product No.: 3M-724
352.50 CHF
excl. 8.1% tax
to the product family
The image shows a black suitcase that is open. Inside, there are two yellow devices and a cable, surrounded by foam padding for protection and support.
Starter kit SRM200 / EFM51
SRM 200 / EFM 51 Starter Kit, for measuring
conductive/dissipative surfaces and
electrostatic fields/charges
consisting of:
SRM 200 pocket meter, EFM 51 electric field meter and conductive case

Product No.: 7100.SRM200.SK51
1,469.80 CHF
excl. 8.1% tax
Show product
The image displays a portable resistance meter. It has a long, narrow body in black and silver with an LED display. At the end, there are two contacts for measurement.
Portable surface resistance meter
ESD
Portable surface resistance meter
for small or uneven surfaces, color-coded
LED ́s, gold-plated, spring-loaded pins

Serial No.:

Product No.: 7111.19301
842.95 CHF
excl. 8.1% tax
Show product
The image shows a black suitcase, open, with a special foam insert. Inside, there is a round, black object with yellow lettering, a metallic bracket, and two blue cables.
Two-sided electrode model 890 set
Two-side electrode model 890 SET incl. stainless
steel plate, insulating plate, blue guard line, -
calibration certificate + conductive carrying case
corresponds to DIN EN 61340-4-1 / DIN EN 61340-2-3

Product No.: 7220.890.SET
622.45 CHF
excl. 8.1% tax
Show product
A hand presses on a round, black button, which is located on a cylindrical housing. The button has a small yellow dot in the center. The housing is on a gray, round base.
Press-down probe model 830 SET
Press down electrode model 830, incl.
stainless steel plate
Insulating plate, conductive carrying case and
factory calibration certificate
(DIN IEC 61340-4-1 and 61340-2-3)

Product No.: 7220.830.SET
778.45 CHF
excl. 8.1% tax
Show product
The image shows an elongated, black bar with two round, bright buttons on the sides. The buttons have a metallic edge and are symmetrically arranged.
Point-to-point electrode
Measuring electrode to point-to-point model 860
Total resistance R + 150 ohm,
Weight: 950 G

Product No.: 7220.860
304.55 CHF
excl. 8.1% tax
Show product
The image shows an ESD event sensor. It has a black body with the label
Preview: The image shows a device called EM Eye, which is used for measuring electrostatic discharges (ESD). It has a small screen displaying measurements and an antenna on top.
Preview: The image shows an ESD event sensor. It has a black body with the label
Preview: The image displays an electromagnetic field sensor. It has a black base labeled
EM EYE Meter
ESD-protective
EM EYE METER with ESD sensor
ESD
ESD sensor for EM-EYE-METER
EMI Sensor for EM EYE METER

3 Products
Product No.: 3M-CTC21
from 1,320.80 CHF
excl. 8.1% tax
to the product family
The image shows a white, rectangular tester with blue and green labels. It has buttons for
AC socket analyzer and wrist strap tester
AC Socket analyzer and wriststrap tester
European plug type F, banana plug
and wriststrap testers

Serial No.:

Product No.: 7111.98135
294.85 CHF
excl. 8.1% tax
Show product
97 to 112 (from a total of 122)