Measurement and testing

Precise measuring and testing is essential for effective ESD protection. The measuring devices reliably record electrostatic parameters - from personal test stations, such as our innovative EPApro®, to permanent monitoring systems, surface measuring devices and high-impedance measuring devices. Ionizers, detector systems and temperature and humidity measuring devices ensure optimum ambient conditions. Our calibration services ensure high measurement accuracy and conformity to standards so that your devices always meet the applicable standards.

We offer training and services for technical advice and support with measurements. You can find an overview here.

 

Our Brands

Desco EPApro Gotschlich ideal tek SCS Simco
The image shows a rectangular mat with a yellow border. In the center, there are two rectangular black areas that have a textured surface.
Preview: The image shows a rectangular, black device with a blue front. On the blue surface are two small green buttons and a red light. A USB cable leads away from the device.
Preview: The image shows a black USB cable with a rectangular connector on one end. The other end has a flat USB plug. The cable is heavily coiled and has a textured surface on the connector part.
Preview: The image shows five thin, rectangular cards lying next to each other. In the bottom left, there is an RFID (radio waves) symbol depicted, showing wavy lines.
Preview: The image shows a long, yellow, trapezoidal plastic block. Next to it are three small, silver screws. The block could be part of an assembly system.
Preview: Image
Preview: The image shows a yellow calibration device with a black casing. In the center, there is a large dial with various numerical markings (1M to 200M) and two arrows at the top for calibration and measurement.
Preview: The image displays a small USB-WLAN adapter. It is primarily silver with a black base. On the front, there are two narrow openings and the model name TP-LINK.
Preview: The image shows a rectangular mat with a yellow border. In the center, there are two rectangular black areas that have a textured surface.
Preview: The image displays a digital scale with a vertical, yellow stand. A display is mounted at the top. The weighing area is rectangular, featuring two flat, gray surfaces.
EPApro® Personnel Tester 1000 accessories
PC-RFID Reader, USB for EPApro®
External temperature/humidity sensor for EPApro®
ID card High Frequency for EPApro®
ID card Low Frequency for EPApro®
Divider for footwear electrode EPApro®
Footwear electrode for EPApro®
EPApro® calibration unit 1000
EPApro® WLAN Adapter
Test mat for EPApro®
Pedestal set for EPApro®

10 Products
Product No.: EPApro.1001.ZPM
from 55.40 CHF
excl. 8.1% tax
to the product family
The image shows an open, black suitcase with a foam-padded interior. Inside, there is a yellow device with a display, buttons, and additional accessories.
Preview: The image displays a compact, rectangular measuring device in bright yellow with a digital display and a large rotary knob. There are several buttons and a carrying strap on the side.
Preview: The image shows an open black suitcase with a yellow device and various accessories, surrounded by pink foam. The suitcase is sturdy and equipped for safe transport.
Preview: The image shows an open, black suitcase with a foam-padded interior. Inside, there is a yellow device with a display, buttons, and additional accessories.
Metriso® B530 Basic measuring device
Metriso B530 Basic meter single
Version: single device / Recommended calibration interval: 24 months bzw. according to test equipment list
Metriso B530 Basic test kit, complete with measuring electrodes type 870
Version: complete kit, with measuring electrodes type 870 / Recommended calibration interval: 24 months bzw. according to test equipment list
Metriso B530 Basic test kit, complete with measurement electrodes type 850
Version: complete kit, with measuring electrodes type 850 / Recommended calibration interval: 24 months bzw. according to test equipment list

3 Products
Product No.: 7100.B530.MK.850
from 1,130.30 CHF
excl. 8.1% tax
to the product family
The image shows a yellow control device with a screen. On the screen, there is a hand symbol and a suit depicted. Next to it is an icon for an open lock.
Preview: Image
Preview: The image shows a yellow control device with a screen. On the screen, there is a hand symbol and a suit depicted. Next to it is an icon for an open lock.
Preview: Image
Preview: The image displays a large green puzzle piece icon positioned on various devices such as a monitor, a tablet, and a smartphone against a bright background.
EPApro® Control Server
EPApro® Control Server license
EPApro® Personnel Tester device license
EPApro® Control Server - application module training
EPApro® Control Server technical add-on module individual measurement configuration
EPApro® Control Server technical add-on module Microsoft SQL connector

5 Products
Product No.: EPApro.1000.LI-2
Price on request
to the product family
Image
Preview: Image
Preview: Image
Belt barrier posts
Belt barrier post, yellow
Color: yellow / Post height: 960 mm / Plate diameter: 350 mm
Belt barrier post, black
Color: black / Post height: 960 mm / Plate diameter: 350 mm

2 Products
Product No.: 1801.G.P.Y
168.45 CHF
excl. 8.1% tax
to the product family
The image shows a small, white humidifier with a front ventilation grille. On the front, there is a blue-and-white logo and two control lights.
minION2 - Portable ionizer
minION2 - Portable Ionizer
Width : 98 mm / Height : 136 mm / Depth : 60 mm / Discharge time max.: 2 s / Coverage: 300 x 1200 mm
minION2 - Portable Ionizer with power supply unit
Width : 98 mm / Height : 136 mm / Depth : 60 mm / Discharge time max.: 2 s / Coverage: 300 x 1200 mm

2 Products
Product No.: 7500.M2.plus
from 802.65 CHF
excl. 8.1% tax
to the product family
The image displays a digital electrofield meter. It features a rectangular shape, a gray front with a large display in the center, and two antennas on top. Buttons are arranged below it.
Preview: The image displays a digital electrofield meter. It features a rectangular shape, a gray front with a large display in the center, and two antennas on top. Buttons are arranged below it.
Preview: The image shows an open, black suitcase with foam inserts. Inside the suitcase, there is a charger, a spiral cable, and a free space for another device.
EFM 022 Electric field meter
EFM 022 Electric field meter
Accessory Kit for EFM 022

2 Products
Product No.: 7100.EFM022
from 241.30 CHF
excl. 8.1% tax
to the product family
The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image displays a rectangular frame with a black, textured inner field and a yellow border. The frame features a central, open field.
Preview: The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Preview: The image shows a long, rectangular red block with a slanted edge. Next to it are several green screws. The block could be used for construction or sports.
Accessories for PGT 120
Mat
Wall bracket for PGT 100 / PGT 120
Divider for footwear electrode

3 Products
Product No.: 7100.PGT120.WK
from 55.75 CHF
excl. 8.1% tax
to the product family
The image displays an elongated, white device with two fans at the ends. It features a connector socket and labeling on the side. The surface is smooth and rectangular.
Ionizing blower 5810i - overhead model
ESD-protective
Ionizing blower 5810i - overhead model with 2 fans
ESD / Width : 155 mm / Height : 96 mm / Length : 813 mm / Version: overhead unit, mit 2 fans / Coverage: 610 x 1220 mm
Ionizing blower 5810i - overhead model with 3 fans
ESD / Width : 155 mm / Height : 96 mm / Length : 1016 mm / Version: overhead unit, with 3 fans / Coverage: 610 x 1220 mm

2 Products
Product No.: 7500.C40X
from 2,160.25 CHF
excl. 8.1% tax
to the product family
Image
Preview: Image
Preview: The image shows a black power supply unit with two electrical cables leading out. On the right side, there is a small illustration of a handheld device with a long handle and a connector.
Preview: The image shows a black foot pedal with a non-slip surface. It has a cable that can be connected to an electrical device. Some technical information is displayed on the top.
Preview: The image displays a black power adapter with two plug pins for the socket. A black cable leads to the connector, which has a round socket. The cable is long and flexible.
Preview: The image shows a clear socket insert with two metallic contacts. The contacts are each long, flat pins protruding from a transparent plastic base.
Preview: The image displays a transparent filter with two connections. On the filter, the words
Accessories for ionizing guns
Filter Nozzle Set for ionizer gun Top Gun TG3
Power supply unit for ionizer gun ION 6115 AirForce
Foot switch für ionizer gun ION 6115 AirForce
Exchangeable wall transformer for Air Gun 980E
Exchangeable nozzle tip for Air Gun 980E
Exchangeable air filter for Air Gun 980E

6 Products
Product No.: 7500.TG3.Z1-2
from 97.10 CHF
excl. 8.1% tax
to the product family
The image shows a black security device with yellow labeling. It has a connection on the front, two colored LEDs (red and green), and a cable leading out from the side.
Preview: The image shows a black security device with yellow labeling. It has a connection on the front, two colored LEDs (red and green), and a cable leading out from the side.
Preview: The image displays an electronic device with a black casing and yellow labels. A cable connects it to a yellow round unit, which also has a connector.
Preview: The image shows a black device with yellow lettering, two buttons, and a connector. Next to it lies a black plug with two prongs and a short cable.
Safety Pips
Tester Safety Pips with warning signal
Width : 60 mm / Height : 26 mm / Length : 125 mm / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 9 V
Tester Safety Pips with warning signal incl. grounding plug
Width : 60 mm / Height : 26 mm / Length : 125 mm / Version: incl. grounding plug / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 230 V
Tester Safety Pips with signal contact
Width : 60 mm / Height : 26 mm / Length : 125 mm / Version: with signal contact / Recommended calibration interval: 24 months bzw. according to test equipment list / Voltage: 230 V

3 Products
Product No.: 7100.181
from 134.30 CHF
excl. 8.1% tax
to the product family
The image shows an open, black suitcase. Inside, there is a yellow device with a display, two round buttons, a cable, and another device. Everything is neatly arranged.
SRM® 200 Verification Kit
ESD
SRM 200 - Verification Kit with case
Pocket instrument for the verification of
conductive and dissipative surfaces

Scope of delivery:
1 SRM 200 with accessories
2 flat electrodes model 820
1 mini probe model 410
1 hand electrode model 45
2 measuring lines
1 conductive carrying case
calibration certificate
serial number:

Product No.: 7100.SRM200.VK
1,148.70 CHF
excl. 8.1% tax
Show product
The image displays a black surface resistance meter with a large white button in the center and two sockets at the bottom. Colored scales for resistance values are shown at the top.
SRM 110 Surface resistance tester
SRM 110 - surface resistance meter
incl. storage bag, grounding wire,
9V battery and factory calibration certificate

Serial no.:

Product No.: 7100.SRM110
340.35 CHF
excl. 8.1% tax
Show product
The image shows a rectangular, gray device with a round ventilation grille at the front. On the side, there is a rotary switch. Below, there is a colored sticker with model information.
ION 6422e - mobile ionizer
Discharge time max.: 4 s / Ion balance +/-: 20 V / Ozone generation max.: 0.004 ppm
ION 6422e- mobile ionizer ++SIMCO/ION++
bench-top model, 24V DC or 24V 50-60 Hz
without power supply unit
[ISO 5 / clean room class 100]

Product No.: 7500.6422
868.70 CHF
excl. 8.1% tax
Show product
The image displays a device for manual use, consisting of a handle with a long cable and a box. The box features a green button and a small display.
EPAtec ionizing gun
AG HP02 ionization gun EPAtec
incl. adapter (Controller) and cable/hose 2.1 m
24V DC / 230V 50 Hz

Auto - ion balance +/-10V
ion output monitoring system
status message by 2 LEDs
- integrated air valve electric
- built-in air filter 0.01 ym
- built-in adjustable air volume throttle

Product No.: 7501.AG-HP02
1,078.25 CHF
excl. 8.1% tax
Show product
Image
Preview: The image displays a calibration certificate. It includes information on accreditation, test data, and the calibration date. The phrase
Preview: The image shows a calibration certificate. On a white background, there are details about devices, calibration data, and a green logo. At the top is the title
Preview: The image displays a certificate titled
Preview: The image displays a calibration certificate with the DPV Elektronik logo. In the background, there are two documents, and in the foreground, a yellow device with two plates is visible.
Preview: The image displays a calibration certificate document titled
Preview: The image displays a calibration certificate on two sheets of paper and a calibration device in the foreground. The document includes technical details and a logo. The device features a black casing with various connectors.
Preview: The image displays a calibration certificate from DPV Elektronik. At the top, it reads
Preview: The image displays a calibration certificate with detailed information about an electronic device. Additionally, there is a picture of a device in the corner, which is gray with yellow accents and has buttons.
Preview: The image displays a calibration certificate document with the logo of DPV Elektronik. Below it, a measuring device and a display are depicted. The date of the certificate is January 23, 2022.
Preview: The image displays a calibration certificate in German with details about the manufacturer and the device. Next to it, there is a device with a display, surrounded by a green logo.
Preview: The image displays a calibration certificate document with details about the manufacturer, type, and order specifics. In the corner, there is a yellow electronic device depicted, which has cables. A green inspection seal completes the arrangement.
Preview: The image displays a calibration certificate on a white sheet and a digital measuring device. The device's display reads 1.24. The measuring device is labeled and has buttons.
Preview: The image shows two calibration certificates with information about devices from DPV Elektronik-Service GmbH. Below, an open suitcase with measuring instruments and accessories is depicted. A green inspection mark is visible.
Preview: The image displays a calibration certificate from DPV Electronics on two documents. At the bottom right, there is a small device with two cables and a yellow attachment depicted. On the left, a round green logo.
Preview: The image displays a calibration certificate featuring the logo of DPV Electronics, surrounded by two documents. In the corner, there is a black device with a yellow sticker and a cable.
Preview: The image displays a calibration certificate in the form of two documents with a green label. In the bottom right, there is a yellow measuring device with buttons and a display depicted.
Preview: The image displays a calibration certificate with details about an electronic device and a graphic of an electrostatic field meter. At the bottom left, a green quality seal is depicted.
Preview: The image displays a calibration certificate from DPV Elektronik, featuring information about a device along with a seal of inspection. Below it, there is a case containing a measuring instrument and accessories.
Preview: The image displays a calibration certificate with textual information and a black testing device named
Preview: The image shows a calibration certificate from DPV Electronics, surrounded by two documents. Below is a device with a touchscreen and controls used for calibration.
Preview: The image shows a calibration certificate in document form and an orange measuring device with a digital display. At the bottom left, there is a green logo with the text
Calibrations for measuring equipment and calibration units
DAkkS/DKD Calibration for electrostatic field meter EFM51
DAkkS/DKD Calibration for Charged Plate Set EFM51
DAkkS/DKD Calibration for electrostatic field meter EFM022
DAkkS/DKD Calibration for Charge Plate CPS022
DAkkS/DKD Calibration for PGT 120
Calibration for electrode model 850
Calibration for electrode model 870
Calibration for temperature sensor
Calibration for calibration unit EPApro
DAkkS Calibration for calibration unit EPApro
Calibration for Ionizer Tester CPM35
Calibration for personnel grounding tester PGT100
Calibration for electrostatic field meter EFM 022
Calibration for surface resistance meter SRM 110
Calibration for Metriso® 2000
Calibration for Walking Test kit WT 5000
Calibration for Charged Plate Set EFM 022-CPS
Calibration for Charged Plate Monitor
Calibration for GTS 267
Calibration for electrostatic field meter 718
Calibration for audit case Metriso B530 7110.B530.SET.WT
Calibration of the calibration unit for GTS 265
Calibration for Safety Pips
Calibration for surface resistance meter SRM 200
Calibration for two-point electrode of mini probe 7220.840.SET
Calibration for electrostatic field meter EFM51
Calibration for EFM51 Walking Test + Verification Kit
Calibration for Veribox
Calibration for Personnel Tester EPApro 1000
Calibration of calibration unit for PGT100
Calibration for personnel grounding tester PGT120
Calibration for thermal hygrometer TF-530

32 Products
Product No.: 7100.PGT120.KA
from 53.15 CHF
excl. 8.1% tax
to the product family
The image shows an electrometer with a yellow front panel. It features controls and displays for the voltage. It has a red connector and stands on two small feet.
WT 5000 walking test kit
ESD
Walking test kit WT5000.B with USB interface
incl. A/D converter, software,
carrying case conductive

Product No.: 7100.WT5000.B
2,547.60 CHF
excl. 8.1% tax
Show product
17 to 32 (from a total of 121)